|
01-24-2011, 07:08 AM
|
|
Cheetah
|
|
Join Date: Jun 2010
Posts: 1
|
|
Same with me; I get stuck at "/" so I'm still using the 5.1.2 version.
I don't know if this is something anyone can help with, but I'm also having trouble forcing my FSB to 200 or anything, period. The bootloader is detecting/correcting it to 214 and I'm using ForceFSB=200 and FixFSB=No with busratio=15. I think this is making my audio crackle pretty badly since I heard an overclocked bus speed can do that, am I on the right track or no? In my bios I can't go below 200 so no help there either.
If it matters I'm still using the 10.6.5 legacy kernel as well since the 10.6.6 makes my system act weird. CPU is slightly overlocked from 2.8 to 3Ghz just by using the multiplier. Even at stock speed my bus speed is detected at 214. Funny thing is starting with the 10.6.4 legacy kernel it's been detected at the current speed where it used to be at 189 or so and my audio was fine. Anyways, here's some info:
My kernel log:
Code:
64 bit mode enabled
rtclock_init: Taking bus ratio path 3 (AMD Phenom)
rtclock_init: Phenom MSR 0xc0010071 returned: 0x8000012c002c0e
TSC: Verification of clock speed PASSED.
TSC: Frequency = 3000.273556MHz, FSB frequency = 428.610508MHz, bus ratio = 7
My bdmesg:
Code:
Config: [hd(0,2)/Extra/com.apple.Boot.plist] 771 bytes.
CPU: AMD Athlon(tm) 7850 Dual-Core Processor
CPU: Vendor/Family/ExtFamily: 0x68747541/0xf/0x1
CPU: Model/ExtModel/Stepping: 0x2/0x0/0x3
CPU: Multipliers x10: max=140, min=0
CPU: MaxDiv/CurrDiv: 0x0/0x1
CPU: TSCFreq: 3000MHz
CPU: CPUFreq: 3000MHz
CPU: FSBFreq: 214MHz
CPU: NoCores/NoThreads: 1/2
CPU: Features: 0x36900221
Keep up the awesome work! I eagerly await each new release.
|