I have this motherboard:
http://www.ecs.com.tw/ECSWebSite/Pro...nuID=1&LanID=0
I have installed iATKOS v4i
and only the sound does not work?
I am tring all the ihachingto... i can download on this machine.
it has 1Gb DDR2
80GB IDE Hard Drive
DVD Rom/CD-RW combo drive
Celeron 420 1.6 GHz
Spec(s):
CPU LGA775 socket for latest Intel® * Wolfdale/ Core™2 Duo /Pentium Dual Core/* Pentium D / Celeron 4 xx series/ Celeron D Processors
FSB 1333*/1066/800/533 MHz
* 945GCT-M/1333 v3.0 is capable to support Wolfdale processor through BIOS update. Please refer to BIOS download.
* This board is ready to support Intel® Pentium D and Pentium 4 processors
*Supports FSB1333 processors through H/W and BIOS modification.
CHIPSET Intel® 945GC & ICH7
North Bridge: Intel® 945GC
South Bridge: Intel® ICH7
GRAPHICS Integrated Intel® Graphics Media Accelerator 950 ( GMA950 )
Max Dynamic Video Memory up to 224MB(System Memory greater than or equal to 512MB)
MEMORY Dual-channel DDR2 memory architecture
2 x 240-pin DDR2 DIMM socket support up to 4 GB
Support DDR2 667/533/400 DDR2 SDRAM
* After ECS validation, this board can support DDR2 max to 4GB, please refer to memory support list
EXPANSION SLOT 1 x PCI Express x16 slot
1 x PCI Express x1 slot
2 x PCI slots
STORAGE Supported by Intel®ICH7
2 x Ultra DMA100/66 devices
4 x Serial ATAII 3.0Gb/s devices
AUDIO IDT 92HD202 6-channel High Definition Audio Codec
LAN Realtek RTL8101E 10/100 LAN (co-lay 8111B)
REAR PANEL I/O 1 x PS/2 keyboard & PS/2 mouse connectors
4 x USB ports
1 x Serial port (COM1)
1 x VGA port
1 x RJ45 LAN connector
1 x Audio port
INTERNAL I/O CONNECTORS & HEADERS 1 x 24-pin ATX Power Supply connector
1 x 4-pin ATX 12V connector
1 x FDD connector supports two 360K~2.88MB FDDs
1 x IDE connector
4 x Serial ATA connectors
1 x SPDIF out header
2 x USB 2.0 headers support additional 4 USB Ports
1 x Clear CMOS header
1 x Front panel header
1 x Front panel audio header
1 x IrDA for SIR header
1 x LPT1 header
1 x CD in header
CPUFAN/SYSFAN connectors
SYSTEM BIOS AMI BIOS with 4Mb Flash ROM
Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI
Supports ACPI revision 1.0 specification
FORM FACTOR Micro-ATX Size, 244mm*220mm