Hi Guys

I was using the iatkos V2 on my intel machine and it was working perfectly.

Now that I have upgraded my system I am not able to get the mac installed..

My config is :-

Amd phenom II x4 965 black edition 3.4 ghz
Asus M4A78T-E
Corsair 4gb 1333 Mhz
Samsung sata 1.5 tb
Seagate baracuda sata 500 gb
Seagte baracuda sata 1 tb
Ide dvd writer

I have downloaded the iDeneb v1.3 10.5.5 and patched it with nforce ppf but on booting it always gets stuck on still waiting for root device

I tried F8 and entered mach_kernel rd=disk0s1 -v and on entering this it detects the samsung hdd and doesn't give me the still waiting for root device error but it gives a cpu panic error and the shows darwin kernel and gets stuck on tht screen

One more strange thing tht happ is tht till the time I do not keep on moving the mouse the progress is not shown , the moment I move the mouse it shows the next lines etc but in the end gets stuck on the same either still waiting for root device or on the cpu 0 panic

I have tried a couple of settings in the bios
1) Changed the storage controller from ahci to ide and vice versa
2) Disabled all onboard devices except usb
3) Tried with all the onboard devices enabled
4) Changed the usb 2.0 from hi speed to full speed ( which helped me earlier on intel )
5) Disabled all the hdd except the primary hdd

Tried enetering mach_970 to check but it doesn't load tht from the dvd...

Need help guys...if neone can direct me to a guide or help me with a solution as to which version shud I install 10.5.6 , 10.5.7 , 10.5.8 ...


Thanks in advance....