InfiniteMac OSx86  


Reply
 
Thread tools Display modes
  #1  
Old 10-02-2009, 04:47 PM
rkdowdy64 rkdowdy64 is offline
Cheetah
 
Join Date: Oct 2009
Location: Leland, NC
Posts: 4
NVIDIA 9800 512MB GT - Issue

Ok, as my first post, i understand there may be some serious amount of noobness, but i humbly request that you bear with me.

I have been steadily working on installing and getting Mac OS X via iPC 10.5.6 PPF5 FINAL distro up and running smoothly. I did extensive research and tried iDeneb first before iPC. After 16 tries at the installation (after 5 failed attempts with iDeneb, i finally managed to get booted into Mac OS X and everythi seemed to work fine.

At first i had good resolutions (22" Gateway monitor displaying 1650x1080 native) but no internet. well, i fixxed the internet, and managed to being installing new software and such. I am an avid World of Warcrack addict, and thought all was well after fighting with the installation for a little bit (namely, the computer doesn't like to go to sleep then wake back up in the middle of the install)

And all seems to be going great. WoW installed.

WoW patched.

i rebooted my PC

and came in and everything still looked good.

i clicked on the WoW icon, and *poof*

"World of Warcraft cannot start; failure to start 3d Acceleration"

Well, i know it does not say exactly that, but it's the 3d Acceleration error.On my iPC distro, i did install the 9800GTX drivers for NVIDIA. there are others options i have installed, but everything works fine. i can currently browse the internet, have good connections, and i had managed to figure out most every bump so far on my own.

But this 3d Acceleration error has my mind boggled. I see some posts talking about efi strings and gfx strings, perhaps a bad .kext or it's not registering properly because i have a XFX NVIDIA 9800 GT as opposed to a GTX.

To clarify, the card is a XFX NVIDIA 9800 GT with 512MB of GDDR3 RAM.

I am comfortable editing just about anything, but i would like a ton of detail, pictures help too. sometimes, links to other posts in other places don't do me as much good. I do my best to give as much info as possible, and i hope to recieve a bunch of info back in return.

I've managed to remove all other errors aside from this one. please, if anyone can help or lay out for me a good way or tactic, or a great post somewhere, i am open to your thoughts, help, and opinions.

Thank you for taking the time to read this. thanks in advance for any posts regarding my issue.
Reply With Quote
  #2  
Old 10-05-2009, 01:26 PM
vladrxpx's Avatar
vladrxpx vladrxpx is offline
Jaguar
 
Join Date: Feb 2009
Posts: 66
i too have xfx nvidia 9800 gt 512mb.
but i cant provide any pictures because i've done this long time ago, and i'm using 10.6.
anyway..
just use osx86tools and create an EFI string (google it). follow the guide on creating the graphics EFI string.

here ya go.. use this guide :

Code:
http://aquamac.proboards.com/index.cgi?board=hack1&action=display&thread=509&page=1
worked for me

Specs:
Gigabyte GA-P35-DS3R;
Intel Core2Duo E6550 @2.33GHz;
XFX 9800 GT 512 mb;
4 GB RAM;
Acer AL2216W 22" display
Reply With Quote
  #3  
Old 10-05-2009, 11:13 PM
rkdowdy64 rkdowdy64 is offline
Cheetah
 
Join Date: Oct 2009
Location: Leland, NC
Posts: 4
i did that and killed my startup, it gave me a kernal panic.

perhaps i did something wrong?
Reply With Quote
  #4  
Old 10-06-2009, 12:07 AM
rkdowdy64 rkdowdy64 is offline
Cheetah
 
Join Date: Oct 2009
Location: Leland, NC
Posts: 4
Ok, i should say that i had done that on my previous install. on my fresh install (from fixing it from where i made it unbootable) i just performed the actions outlined to me.

i got a good reboot. (otherwise i wouldn't be typing this out) and i still feel like i am missing something here.
Reply With Quote
  #5  
Old 10-06-2009, 01:39 AM
rkdowdy64 rkdowdy64 is offline
Cheetah
 
Join Date: Oct 2009
Location: Leland, NC
Posts: 4
yep, still no go. i followed the instructions and still, no 3d acceleration

i am so close to giving up. and by that point i usually figure it out. perhaps something will come to me soon, i just gotta keep trying at it.
Reply With Quote
  #6  
Old 10-10-2009, 09:19 PM
kemi01 kemi01 is offline
Cheetah
 
Join Date: Oct 2009
Posts: 1
My ASUS GeFroce 9800 GT 512mb works fine, out of the box.
I have used this Guide: http://lifehacker.com/5360150/instal...cking-required

But i have one Problem, DualScreen will not work...
Reply With Quote
  #7  
Old 10-11-2009, 11:01 AM
thorazine74 thorazine74 is offline
 
Join Date: May 2009
Location: Spain
Posts: 411
You may need to update Leopard to a more recent release or at least update the NVIDIA kexts to get your card supported in 10.5.6.
Support for a card is definitely not the same in between different OS versions, many nvidia cards that work in Snow would not work in 10.5.6, you can install new nvidia drivers on old OS versions but thats not guaranteed to work.
You can check NVDANV50Hal.kext plist for which device ids are supported in your installed version, if your card's device id is not there it may not work.

AsRock P45TS | C2D E8200 | GeForce 8600GTS
Mac OS X Snow Leopard 10.6.1 + Windows 7 Ultimate 6.1.7600 + Fedora 11
Reply With Quote
  #8  
Old 12-03-2009, 12:20 AM
numblock numblock is offline
Cheetah
 
Join Date: Nov 2009
Posts: 1
Worked!

I'm a noob at this os or osx for that matter. This is definitely a beautiful OS. If I want to learn how to move around the OS X do I keep it here or can I have a link to a good beginners website dealing with Snow leopard or Leopard?? (waiting for kind replies).
(Actually running Snow Leopard 10.6.1 in a Sager).



💡 Deploy cloud instances seamlessly on DigitalOcean. Free credits ($100) for InfMac readers.


Last edited by numblock; 12-03-2009 at 12:23 AM.
Reply With Quote
Reply