I just installed Kalyway 10.5.2 on a GA-P35 Ds3L / Q6600 / 4gb RAM system; all's well except that the Q6600 is detected as a single core CPU. I had set up Kalyway on my other GA-P35 Ds3L just a couple weeks ago, pretty much identical machine yet it's Q6600 is showing correctly as 4 core. FWIW both are GO step Q6600's OC'd 2.91ghz. I don't recall the Options I chose for the setup, should I re-enter the setup via the kalyway disc and select options I may have overlooked, or can I fix this within the present install?

I didn't select any boot options at all, either on this latest GA-P35 Ds3L rig or when installing Kalyway on the first GA-P35 Ds3L machine. Both machines are identical in every way(mobo/RAM/vid etc) hardware-wise, and BIOS settings are all the same:
Limit CPUID=disabled
No-execute=disabled
C1E=disabled
TM2=disabled
EIST=disabled
ACPI=SI
PME=Enabled
HPET=32 bit


Used same Kalyway disc as well. I did try cpus=1 but there was no effect...