UHCI/EHCI Built in with dsdt fix - Page 10

Jedric · #91 09-20-2009, 03:04 AM

Here you go folks.

Jedric · #92 09-20-2009, 05:57 AM

Apparently my EHCI was being detected built-in even without the DSDT. So its just the UHCI that im really having problems with being detected as Expansion slot.

AppleUSBUHCI[0x6e76000]::start unable to initialize UIM

twr · #93 09-20-2009, 09:24 AM

nobody wanna help me ? pleeeease.

ohwhyme · #94 09-21-2009, 12:44 AM

I have a P35-DS3P and I just downloaded your dsdt.aml file and the ethernet works, sound, sata is displayed as ich10 but cant seem to wake up the computer with the keyboard or mouse. My old dsdt showed the removal device when I woke up from sleep and my pci network card worked so now I can just use the internal card

I have the apple aluminum keyboard as well hehe. The Usb mouse works for waking up which is odd but the keyboard doesnt do anything. Does hibernate work for anyone? Does wake from bluetooth work for anything? I read the only way you can wake from bluetooth is via internal apple or a dlink 120 bluetooth adapter is this true?

kDawg · #95 09-21-2009, 10:31 AM

Quote:

Originally Posted by twr

1°my usb keyboard & mouse aren't able to wake up OSX from S3 mode (whereas they do it in Windows) ;

2°I can put OSX into S3 mode with the power button if this option is activated in pref. sys., but when not, it does nothing ; it should make the shutdown menu show up.

I'm assuming it might be a DSDT issue.

edit: so sorry, I forgot some words ... I wanted to say : everything is working as it should, but USB wake-on-sleep & shutdown menu from power button.

wanna help me anyway ?

#1: You have a ICH7 motherboard? If you've tried the USB/EHCI pathces in the attached DSDT file then you might have to try Slice's IOUSBFamily.kext. The problem might be that your USB/EHCI port aren't being reported as "built-in". Other than that as long as your keyboard and mouse are attached directly to the back of your motherboard it should work. Try Slices' kext and see if that fixes it. If so there may be something else going on. Perhaps a BIOS setting.

I believe your #2 problem is normal behavior for a OSX86 machine. When I push my power button my sleep menu does not show up. It will however go to sleep.

This patch had at one point worked for me. It doesn't anymore.
http://www.infinitemac.com/f84/vario...post21188.html

k

wwbsox · #96 09-21-2009, 11:30 AM

@xwin78

My DSDT is in the original post.

Also, does anybody have an old USB 1 hub? I'm working on getting the Apple aluminum keyboard to wake the computer from sleep.

My Rocketfish apple mouse will wake the computer as it is detected as USB 1 (UHCI), my keyboard is detected as High Speed USB (EHCI). My theory is that if the keyboard was plugged into an old USB hub and not detected as high speed.... It might work then. Unfortunately I dont have an old hub to test.

osxfr33k · #97 09-21-2009, 06:22 PM

I have the Asus Maximus Formula and the GA-EP35-DS$ very similar to the posts here.

I used DSDTSE and all the fixes are in place. DTGP, HPET and RTC. I am trying to figure out exactly where the graphics section go. Here is the one I tried to fix, look in the section DEVICE (PCI0). Its very obvious where I started the the code. I could not move it over to the left and align everything.

Do I need to start the code right under DEVICE (PCI0)? I started the code right between DEVICE (PCI0) and Name (_HID, EisaId ("PNP0A08")). I have a feeling I have placed it incorrectly or something?

Is there an easy way in DSDTSE to insert the code generated into the main editor and have it automatically go to the correct section and insert correctly?

File Attached

osxfr33k · #98 09-21-2009, 06:28 PM

Sorry the file did not attach the first time before I clicked Submit. I see there was a Submit below where the attached window was so I had to post this file in a reply. Sorry about that. Any help on formatting this correctly would be greatly appreciated!!

sk1nhd33t · #99 09-21-2009, 06:35 PM

@wwbsox

hopefully we can find a fix for our aluminum keyboard waking from sleep, on my ES2L mobo it's the only thing that's missing since automatic sleep is now working thanks to PleaseSleep

BTW are you using the one with num pad or without?

twr · #**100** 09-21-2009, 06:52 PM

Quote:

Originally Posted by kDawg

#1: You have a ICH7 motherboard? If you've tried the USB/EHCI pathces in the attached DSDT file then you might have to try Slice's IOUSBFamily.kext. The problem might be that your USB/EHCI port aren't being reported as "built-in". Other than that as long as your keyboard and mouse are attached directly to the back of your motherboard it should work. Try Slices' kext and see if that fixes it. If so there may be something else going on. Perhaps a BIOS setting.

I believe your #2 problem is normal behavior for a OSX86 machine. When I push my power button my sleep menu does not show up. It will however go to sleep.

This patch had at one point worked for me. It doesn't anymore.
http://www.infinitemac.com/f84/vario...post21188.html

k

gonna check my EHCI/UHCI DSDT.dsl editing ...

my mobo is a G31M-ES2L : it looks as if I'm not the only one facing its USB/sleep issues !

my BIOS settings are OK (S3 + USB wake from S3 in advanced options) : if the DSDT trick doesn't make it, I'm gonna try the Slices' .kext.

thx for your help !