@cyclobot.

Working on the issue. If you have a USB1 keyboard or mouse, they should wake the system.

I added the usb section to your dsdt, give this a try.

Attached Files

dsdt ep45-dq6.zip (21.4 KB, 27 views)

---

GA EP35-DS3P - Intel Q9550 - 2 X 2GB Dominator 1066Mhz, EVGA 8800GTS 512MB
2x320Gb SATA in Software Raid 0, 1x1.5TB for Time machine and storage (Geekbench 6293)
10.6 Retail 64bit Using DSDT for audio-889a, video-8800gts, ethernet w/TM fix, USB fix, and SATA fix.
MacBook 2,1 - 10.6 Retail
MacBook 3,1 - 10.6 Retail

after some new DSDT editings, still no luck on my G31M-ES2L with USB Alu. keyboard : sleeps very well, but won't wake without PWRB.

here is my .dsl ...

Attached Files

dsdt.dsl.zip (12.2 KB, 11 views)

Thanks wwbsox. It does wake up with the mouse without giving any errors.

Update:
Well after I started using your modified DSDT file, I started getting KP. Not sure what's causing it but I had to switch back to my original one.

@cyclobot

That was the dsdt that I got from you. I just edited the usb section. But for the record... You have an EP45-DQ6, is this ICH10 south bridge? I know my EP45-DS3L is and I dont need any DSDT patching. Sleeps ok. Wakes from keyboard fine too.

---

GA EP35-DS3P - Intel Q9550 - 2 X 2GB Dominator 1066Mhz, EVGA 8800GTS 512MB
2x320Gb SATA in Software Raid 0, 1x1.5TB for Time machine and storage (Geekbench 6293)
10.6 Retail 64bit Using DSDT for audio-889a, video-8800gts, ethernet w/TM fix, USB fix, and SATA fix.
MacBook 2,1 - 10.6 Retail
MacBook 3,1 - 10.6 Retail

Yes it is ICH10R. My computer goes to sleep just fine and it does wake up as well but only with the power button.

hi all 1st post here, i have 2 things to ask

1) tried gfx injection of the 8800gt (by dsdt) and i had no luck, maybe the bus location could be wrong? (where do i find it exactly for my card?)

also my pci0 device starts likes this:
Device (PCI0)
{

Name (_HID, EisaId ("PNP0A08"))
could that be a problem? (some users said it should be 03)

2) i was able via dsdt to make the uhci and ahci appear as internal and the sata now shown as intel esb2 AHCI, but my mobo has also Jmircron and the 2 Jmicron devices shown as "Unknown"
any fix for this?

removed a lot of kexts in /e folder , now i only got FakeSMC and, UUID.kext (+ionetworking for my net and openhaltrestart)
i'll try now to rebuild mkext without openhaltrestart.kext and see if i still need it

i was testing sleep after the UHCI/EHCI modifications to the dsdt and after a lot of time i have sleeep WORKING!!
wake up via mouse works, no keyboard but my keyboard is ps2 and loaded with hacked kexts (voodoops2+appleacpips2nub)
but i noticed a strange KP...
when pc wakes if i go again to control panel and mess with the power settings i get kernel panic (no debug but the "you neeed to restart your computer..."
how can i see what caused the kp?
anyone else with this issue?

EDIT: KP is because of my 2nd pci audio card M-AUDIO and hacked drivers of envy24HT (known kp)
i switched to the onboard soundcard after wake and there is no kp so everything ok

For those with an Apple keyboard, what about getting a strictly USB 1.1 hub? and plug it in through there =P

I have been trying hard to correct my dsdt.dsl, but to no avail. My USB devices do not mount at all in SnowLeo. In Leo I have been using the EHCI mods from orByte, Slice or AnV.

Sorry, but I have already spent useless hours and could really need some help with this. If somebody kind could look at my dsdt and correct it I would be forever grateful. I would even be willing to contribute something back.

The dsdt.dsl for my Toshiba Satellite P100 is attached.

Hoping .. ,
Bugs

I got a question about the fact that your supposed to leave device 0x001D0003 alone,
I'm doing this to another board now, and none of it's usb devices have that Name/ID, so then do I not worry about leaving one alone now?