Ριξε μια ματια εδω στο post για να παιζει η καρτα σου σε 10.5
This is a small guide on how to set up Natit for PCI-E Radeon HD graphics cards in Mac OS X Leopard (10.5.5 & higher). By following the steps below you will get full QE/CI/OpenGL and DVI output. HDMI, S-Video and Composite outputs are confirmed to work with a Radeon HD3870.
It is actually a lot easier than you might think.
Important!
This guide is for advanced users only. If you want a simple installer, check lastExile's installer collection.
In case you have an older version of Leopard installed, see the archived copy of this post.
Supported Radeon HD cards:
Radeon HD 2400
Radeon HD 2600 Pro, Radeon HD 2600 XT
Radeon HD 2900 Pro, Radeon HD 2900 XT
Radeon HD 3850
Radeon HD 3870
Radeon HD 3870x2
Other Radeon HD 2x00/38x0 cards might work as well
Step by step guide:
Get Natit (attached to this post)
Extract the archive and copy Natit.kext to /System/Library/Extensions
Locate ATIRadeonX2000.kext in /System/Library/Extensions, Open /System/Library/Extensions/ATIRadeonX2000.kext/Contents/Info.plist with the editor of your choice and add the PCI ID of your card (if it is not already in there). Save.
Only if you have a Radeon 2900 Pro or a Radeon 2900 XT download this
Extract it and copy ATY_Franklin.kext to /System/Library/Extensions/ATINDRV.kext/Contents/PlugIns.
Otherwise skip this step.
Open Terminal (if you haven't already done so) and type:
CODE
cd /System/Library/Extensions
sudo chown -R root:wheel *
sudo chmod -R 755 *
sudo rm /System/Library/Extensions.mkext
sudo rm /System/Library/Extensions/Caches/com.apple.kext.info
You are done. Reboot and pray
Additional files
If you have problems with white menus, you might want to try one of these files. Starting with 10.5.5 it should not be necessary to install these patches any more.
If you have a Radeon 2600 Pro or a Radeon 3850 and 10.5.1 download this (white menu fix)
Extract it and replace the original ATIRadeonX2000GLDriver.bundle in /System/Library/Extensions with the one you have just downloaded.
If you have a Radeon 2600 Pro or a Radeon 3850 and 10.5.2 download this (white menu fix)
Extract it and replace the original ATIRadeonX2000GLDriver.bundle in /System/Library/Extensions with the one you have just downloaded.
Notes:
It is recommended to perform a clean install. Do not select any graphics-related things during the installation.
AMD users: you might need a patched OpenGL.framework.
Radeon HD 2400 users: You do not get DVI support. You have to use a DVI2VGA-converter instead.
If DVI works, HDMI will work as well (with DVI2HDMI adaptor), no HDMI audio ATM
AGP versions of these cards require additional patching. I cannot test it and therefore this guide does only apply to the PCI-E versions.
Changelog:
2009-03-01: Updated permissions of Natit.
2009-02-27: Added new Natit.kext and updated the post.
2008-04-03: updated 2900 information, added ATY_Franklin.kext link, added link to FAQ
Thanks to netkas who made these great drivers. For more information check the #radeonhd IRC channel at irc.osx86.hu
Please also have a look at this FAQ!
Attached File(s)
Natit.kext.zip ( 23.61K ) Number of downloads: 4154
ολο το post για να κατεβασεις τους kexts
http://www.insanelymac.com/forum/ind...&mode=threaded
Απο οτι λεει και αυτος εκει επανω για τους κατοχους AMD δεν πρεπει να βαλεις καθολου kext (επιλογη για καρτα) οποτε εαν θες ξανακανε ενα καθαρο install με αυτα που θα κανω post παρακατω.
...
Δωσε τις παρακατω επιλογες :
1.iDeneb Essential System
2.Patches 10.5.6 Ready
3.Alternative Essential Patch
4.AMD Patch
5.Apple Azailia Audio
6.AppleATIATA Chipset
7.Kernel 9.2.2 SSE3
8.Marvel 88E8056 Network
Fixes
1.FireWire Remove
2.Seatbel Fix
3.PowerOff_OpenHaltRestartAll