Cannot boot after installation

yeah, i use ATI X300 PCIe card... it says debugger called <panic>

how to put d log? now i am online with my laptop, my pc is in front me

i am feeling so xcited wanna thanx to naquaada for ur guide on installing d zephyroth 10.5.1 AMD... i followed all ur guide (half way till before modify d system setting [installing onyx]), and hey... it works fine now! just need kext file to make it all perfect! and for that... can u guide naquaada? thanx so much!

i need kext for:
1. ATI X300 and Nvidia GeForce 6
2. Nvidia nForce 430 onboard LAN
3. Ricoh PCMCIA PCI card

thanxx!

sorry naquaada, left 1 more kext:
SoundMAX ADI AD1986A (onboard sound on ASUS M2NPV-VM)

thanx so muccchhh!

Tell us the exact infomation of the panic. Do you have an ATI gfx card? Then it could be GeForce.kext and NVResMan.kext.

Put the log ! Is the panic related to GeForce or NVDAResman ? If yes, check the wiki.

i installed zephyroth 10.5.1 on my PC. installation goes nicely.
but then After rebooting and taking DVD out. my pc dont find anything bootable on my HD it says: Please insert media to boot or... something idont remember.
do i need install grub or something? i have tested two times!

sorry i dont speak english and im noob with Mac. I have only one drive!

AMD Athlon 64 4200+ X2
Asrock ALiveXFire-eSATA2
ATi Radeon X1950 Pro
160GB HDD Western Digital
LG DVD+R/RW Writer

Ubuntu Linux 7.10 (Gutsy Gibbon)

riangeli, How to fix MBR boot without EFI:

// rdiskXsX: you have to know the proper partition names and replace them with X.
In my case, it would be rdisk0s1, first HDD, and first partition, on which leopard has been installed,
which you need to make bootable. You can also check this in the Disk Utility.

Hit enter after each terminal line to execute the command. //

1 -> Launch DVD
2 -> At boot prompt, type -s (single user mode)
3 -> Type:

fdisk -e /dev/rdiskX
update
f 1
w (yes)
q

4 ->
cd /usr/standalone/i386

./startupfiletool -v /dev/rdisXsX ./boot (X is your partition)

5 ->
mount -uw /
mount -t hfs /dev/diskXsX /Volumes

6 ->
bless -device /dev/diskXsX -setBoot -verbose

7 -> reboot, without any dvd inserted.

It wont work my hdd is rdisk0 and leo is installed on partition 2
so its then rdisk0s2? I try many times and different variations.

when try to boot It just says nothing or b0 error

what means b0 error ?

hi again. i nodes that in leopard install my 160Gb hdd is shown only a 128Gb in disk utility?
and Seagate Barracuda 200Gb hdd too appears to be 128Gb too.

can anyone tell me why? sorry my bad english...

and thanks!

Maybe you've set a size limiting jumper on the harddisks? A friend did this (twice, even after I told him,grr) and his harddisks were also recognized as 128GB, in BIOS too.

thankx! tell the others to try out my system! what kext do you need? You can also contact me via email.

@naquaadaMaybe you've set a size limiting jumper on the harddisks? A friend did this (twice, even after I told him,grr) and his harddisks were also recognized as 128GB, in BIOS too.

No! I dont have size limiter jumpers i don't know why they are only 128Gb.
I have the PS2 Keyboard problem so i doesn't manage to get in desktop to look my HDDS

Same here, 250 GB IDE hdd only recognized as 128 GB (SATA hdd does not work at all, impossible to partition). Something to do with 48 bit addressing or something?

In Windows XP, there was the same problem.
* 48-bit LBA support is necessary for drives larger than 137GB (128GB binary). The following conditions are necessary for the correct functioning of 48-bit LBA support in Windows 2000/XP:
* Windows XP Service Pack 1 (SP1) must be installed for Windows XP versions prior to August 2002. For information about SP1, see Microsoft Article 322389.
* The system must have a 48-bit LBA-compatible Basic Input/Output System (BIOS) installed. This includes EIDE controller card BIOSs.
* You must enable the support in the Windows registry

Besides, it does not boot even after applying Puttabong's instructions.

(… Maybe I have to wait for Rev2...)

ive tried to boot zephyroth leopard 10.5.2 AMD... my laptop will say CPU panic or no drivers found. what does it mean? i had AMD turion 2x processor and a 2GB of ram...i keep trying for 10x,but still it gives me the same problem, and i tried to burn it to other dvd, coz im thinking i had a bad copy, and i wasted 10 dvds. still same problem.

heres my complete system config:

CPU Arch : 1 CPU - 2 Cores - 2 Threads
CPU PSN : AMD Turion 64 X2 Mobile Technology TL-60
CPU EXT : MMX(+) 3DNow!(+) SSE SSE2 SSE3 x86-64
CPUID : F.8.2 / Extended : F.48
CPU Cache : L1 : 2 x 64 / 2 x 64 KB - L2 : 2 x 512 KB
Core : Trinidad (90 nm) / Stepping : BH-F2

Freq : 2009.07 MHz (200.91 * 10)
MB Brand : Quanta
MB Model : 30B8
NB : NVIDIA GeForce Go 6100 rev A2
SB : NVIDIA nForce 410/430 MCP rev A3

GPU Type : GeForce Go 7200
GPU Clocks : Core 450 MHz / RAM 700 MHz
DirectX Version : 10.0

RAM : 2048 MB DDR2 Dual Channel
RAM Speed : 334.8 MHz (CPU/6) @ 5-5-5-13
Slot 1 : 1024MB (PC2-5300)
Slot 1 Manufacturer : Samsung
Slot 2 : 1024MB (PC2-5300)
Slot 2 Manufacturer : Samsung

on this…

more power to you!

DOES zephyroth leopard 10.5.2 AMD support AMD turion 2x? i just want to install zephyroth leopard 10.5.2 AMD on my system, coz most of my friends told me this is the best 1 ever. hope i had a support from this.