|
03-15-2008, 03:01 PM
|
 |
|
|
Join Date: Jan 2008
Location: Spain
Posts: 450
|
|
1st IDE Channel HD=OK (master)
1st IDE Channel DVD= second port (slave)
FDC=disable
Onboard Parallel=disable
At boot press the bios boot selector and boot from your dvd drive.
Open your case and plug your dvd to the second port of 1st ide channel, the same cable for your hd drive, behind of the dvd there´s a jumper, you need set the jumper like slave
Quote:
MS, MA, DS, 0, or M = Master or Device 0. The drive is the first drive to be used on the cable/channel (connected to the end connector on an IDE cable).
SL, PK, 1, or S = Slave or Device 1. The drive is the second drive to be used on the cable/channel (connected to the middle connector on an IDE cable).
CS, CSEL = Cable Select. The drive can be automatically set up by a capable system
|
you need put the jumper in the middle (the example is for cable select) |