#1
|
|||
|
|||
Freeze after start
hi guys,
i am searching since 2 weeks for a solution, but i am getting really desperate. at first here my system: laptop asus z92km (barebone a6km) amd turion ml 34 1,8ghz 1gb ram 400mhz geforce 7300 go that should be the most important things. now my problem. my system freezes after few seconds after booted up. i have found out that there is a problem with gfx card. when i start without any driver and injecter, there is also no freeze, but of course just vesa mode (1024x768, no qe, no ci). the weired thing, under tiger my geforce go 7300 worked fine, with qe and ci and resolution change (native resolution is 1280x800). now i have tried out different leopard install versions and nearly every injecter i could find via google (nvkush,nvinjectgo,natit,titan,nvdarwin) i also added manual my dev id 0x01d7 to the proper, but everytime i get the same proplem. after few seconds using leopard with qe and ci my system crashes. keyboard and mouse dont react anymore. anyone any ideas, i could try? i myself dont know anymore what i could do. could there be a problem with bus speed, or acpi or sth like that. i noticed that tiger shows in system profiler my bus speed correct with 400mhz, but leopard shows just 200mhz. anyone knows how to fix this so i could see if this is the problem. lots of thx for any help, any ideas. greetz |
#2
|
||||
|
||||
Hey given it a try over here I see. InsanelyMac has been getting slower by the day.
Just so everyone can see the steps that led up to this. Here is a link to your previous post over on InsanelyMac. http://forum.insanelymac.com/index.p...=0#entry988891 Your problem is beyond my limited knowledge. MOBO: Z77MX-QUO-AOS CPU: Core i7 3770K GPU: MSI N760 TF 2GD5/OC Case: Modded MacPro2,1 Memory: 32GB Corsair Vengeance (CMY32GX3M4A1600C9) Wifi: Airport Extreme bcm94321MCA BIOS: HermitCrab Labs H3A.816M Monitor: AOC Q2963Pm 29" WFHD 2560x1080 21:9 Interests: KDE on Apple Darwin, Keeping it real with the command line, Helping those that help themselves |
#3
|
|||
|
|||
yeah,
well, i really want this thing. so i wonīt give up. the thing is, that i have read from a lot of other users, that geforce go 7300 works with leopard, so there must be sth wrong with my installation. i also read, that a fresh install doesnīt work properly, but update from tiger will work, so i will try this now. but at the moment, i donīt know, how i could update tiger 10.4.9(uphuck) to leopard 10.5.2(kalyway) or leopard 10.5.4(leo4allv4.1). get it hard or die trying :P greetz |
#4
|
||||
|
||||
You don't get any errors when you installed 10.5.2 did you?
MOBO: Z77MX-QUO-AOS CPU: Core i7 3770K GPU: MSI N760 TF 2GD5/OC Case: Modded MacPro2,1 Memory: 32GB Corsair Vengeance (CMY32GX3M4A1600C9) Wifi: Airport Extreme bcm94321MCA BIOS: HermitCrab Labs H3A.816M Monitor: AOC Q2963Pm 29" WFHD 2560x1080 21:9 Interests: KDE on Apple Darwin, Keeping it real with the command line, Helping those that help themselves |
#5
|
|||
|
|||
hey, i dont get any errors with any leopard version, as long as i am in vesa mode.
tiger works correct with qe/ci. this last error, which i described at insanelymac, now happens with kalyway 10.5.2 i am quite sure, that this problem is the prob for every distro it says "local apic error" |
#6
|
|||
|
|||
omg
well, i donīt want to scream it too early and too loud, but it seems to be fixed. my system is working!!! i have got an working leopard on my asus laptop .. wuhaaa, plz plz plz - go asus go :P well, it was a local apic error, like i wrote the post before. the fix is, i have to boot up with platform=x86pc til now, it works absolutely correct, with QE AND CI and NO FREEZE!!! could anyone tell me the difference between PLATFORM=ACPI or PLATFORM=x86PC ??? cheers - omg yeaaaah, yeaaaahhhh PS: Lol, i just have read, that APIC is not ACPI ... so, it was just a LUCK SHOT??? hmmmm .. anyone here to tell me, why it did work with this flag?? Last edited by mudemi; 12-12-2008 at 05:27 PM. |
#7
|
||||
|
||||
ACPI is for power management in boards that have that setting available... otherwise the x86PC boot flag disables this check.
You can write this to your com.apple.Boot.plist file by opening up Terminal and typing: Code:
sudo nano /Library/Preferences/SystemConfiguration/com.apple.Boot.plist to save: [ctrl]+[o] then hit enter to save over the old one to exit: [ctrl]+[x] now reboot and you shouldn't need to do enter it in. |
#8
|
|||
|
|||
lanceomni - seems like i have similar hardware as you, which OS x 86 are you using ?
Specs:AMD Athlon 64 X2 Dual Core Processor 5000+ 2.61GHz-ASUS M2N-SLI DELUXE-NVIDIA nForce 570 SLI-PCI-E ATI Radeon X1900 XT-2x SATA1TB / 1x IDE120GB-Audigy2ZS-NVIDIA nForce Networking Controller-2x 1GB DDR2 PC2-6400 400MHz GEIL-Apple IphoneJailbroken 2.2 8GB |
#9
|
|||
|
|||
hi, well
unfortunately the system crashes are anyway too much. now i can work for some times, but after about 30minutes or more i got the same error again. local version error. i guess there is sth with that kernel panic during boot up. LOCAL APIC VERSION 0x14 NOT AS EXPECTED. I have read, that 0x14 is LAPIC for Intel Pentium and Intel Xeon CPUs. Of course I have got an AMD ML-34 Turion, but nothing in my BIOS to disable APIC. Does anyone know, how to use the apic kernel flags? nolapic, disableapic do i have to write them just down? or this way -disableapic or this way disablepanic=1 ... thx for any help, cheers |
#10
|
|||
|
|||
unfortunately i guess i am off now.
i will have to give up, cause i cannot find any solution for my problem and it seems that i am on my own with that problem. i can work with my hackintosh fine, but only for some time. with 9.2 sleep kernel, my system crashed after seconds. with the new voodoo kernel 9.5, everything seems to be fine, but sometimes after minutes and sometimes after hours of working, i always get the same kernel panic described in this topic. i have tried so much distroīs like iatkos, ideneb, and so on. everytime same thing. the best one had been kalyway 10.5.2. i updated it to 10.5.5 but anyway nothing changed. same probs with older kernel, same problem with every update. of course thereīs no way, to work with such an instable os - really sad right now, but i think i have to go back to windows xp ( i will read on here and hope that anyone will find a solution, but i guess there is no one for this. i have four choises: 1) use tiger with ci/qe 2) use leopard with vesa mode and no ci/qe 3) use leopard with qe / ci and system crash many times a day 4) use winxp but without any crashes i donīt want to, but i have to hope to find anything, that is going to help me cheers 💡 Deploy cloud instances seamlessly on DigitalOcean. Free credits ($100) for InfMac readers. |