InfiniteMac OSx86  


Reply
 
Thread tools Display modes
  #1  
Old 01-29-2008, 05:17 AM
riangeli riangeli is offline
Jaguar
 
Join Date: Jan 2008
Location: Kalajoki, Finland
Posts: 35
So my problem is that my Leopard is not a Leopard its more like a slug!
I think i don´t have supported driver for my ATA devices. i try to find out it here:
http://forum.insanelymac.com/lofiversion/index.php/t517.html

I have try copy IOATAFamily.kext and from DVD but it did not help?
where i find solution of this..

[edit]
Xbench told me that my hdd speed is about 1.44 MB/sec

thank you!

Leopard 10.5.2 - AMD Athlon X2 5600+ @ 3.01Ghz - 4Gb DDR2 800Mhz - ATi Radeon HD3870 512Mb GDDR4 - 2 SATA HDD 80Gb + 320Gb.
Reply With Quote
  #2  
Old 01-29-2008, 05:35 AM
naquaada's Avatar
naquaada naquaada is offline
 
Join Date: Jan 2008
Location: Germany
Posts: 1,216
Disk speed is rather low on ATA100, I have the same problem (on nforce 4). Xbench has a lot of disk tests. I think you're talking from random uncached write or so. What do you have for a chipset?

2 Opteron systems: OSx86 10.5.8, Andy's 9.8.0 kernel, Asus A8N-SLI Premium, Opteron 185 o'clocked @ 2 x 2,95 GHz (2nd system 2.6 GHz), ATI Radeon HD2600XT 256MB Dual-Monitor 2x HP L2035, 4 GB RAM, Griffin FireWave as main audio device, Marvell + nForce LAN, Asus U3S6 USB3/SATA6 card, 5,5 TB harddisk, Firewire 800 card, Apple Remote + eHome IR receiver, 2x Wacom serial graphics tablet, Canon Pixma iP4700, Logitech Internet Navigator wireless keyboard/mouse combination.

My Audio stuff: M-Audio Transit USB (default audio), M-Audio ProFire 610, M-Audio ProFire Lightbridge (34 channels) using Creamware A16 ADAT converter MIDI: M-Audio Midiman 4x MIDI interfaceBehringer Audio Mixers: Xenyx 1002, Xenyx 1002FX, Xenyx 1202FX, Eurorack UB1002FX, Eurorack MX1804FX, Eurorack MX262A • FX devices: Lexicon MPX100 DSP, Behringer DSP-1000 Virtualizer, Behringer MiniFEX 800 DSP, Behringer Multicom Pro MDX4400 compressor RETRO: MSSIAH midi/sequencer/synthesizer cardridge for the C64 (Dual-SID), Steinberg M.S.I. MIDI Interface for C64
Reply With Quote
  #3  
Old 01-29-2008, 05:47 AM
riangeli riangeli is offline
Jaguar
 
Join Date: Jan 2008
Location: Kalajoki, Finland
Posts: 35
yes that result is uncached write! I have Asrock motherboard chipset? - Northbridge: AMD 480X CrossFire™ Chipset - Southbridge: ATI™ SB600

here is my MoBo: http://www.asrock.com/mb/overview.asp?Model=ALiveXFire-eSATA2

Leopard 10.5.2 - AMD Athlon X2 5600+ @ 3.01Ghz - 4Gb DDR2 800Mhz - ATi Radeon HD3870 512Mb GDDR4 - 2 SATA HDD 80Gb + 320Gb.
Reply With Quote
  #4  
Old 01-29-2008, 06:06 AM
riangeli riangeli is offline
Jaguar
 
Join Date: Jan 2008
Location: Kalajoki, Finland
Posts: 35
i dont really know what the chipset means but i think i have AM2 chipset? AMD Athlon 64 4200+ X2

Leopard 10.5.2 - AMD Athlon X2 5600+ @ 3.01Ghz - 4Gb DDR2 800Mhz - ATi Radeon HD3870 512Mb GDDR4 - 2 SATA HDD 80Gb + 320Gb.
Reply With Quote
  #5  
Old 01-29-2008, 06:12 AM
cgsheen's Avatar
cgsheen cgsheen is offline
Panther
 
Join Date: Jan 2008
Location: AZ
Posts: 247
You had it right: The chipset is the northbridge and southbridge. You've got a 480X / SB600 chipset motherboard. On my 690G / SB600 AM2 motherboard, I had to use the "SB600_SATA_ATA.kext" (maybe it was an installer...) to get the internal drives recognized and working properly. I found it somewhere on InsanelyMac... Maybe it's on the Wiki.

Running both 10.5.8 and 10.6.4 on my stinking AMD/ATi machine...
Reply With Quote
  #6  
Old 01-29-2008, 06:17 AM
riangeli riangeli is offline
Jaguar
 
Join Date: Jan 2008
Location: Kalajoki, Finland
Posts: 35
thanks! i find this out and try it! I hope it works!

Leopard 10.5.2 - AMD Athlon X2 5600+ @ 3.01Ghz - 4Gb DDR2 800Mhz - ATi Radeon HD3870 512Mb GDDR4 - 2 SATA HDD 80Gb + 320Gb.
Reply With Quote
  #7  
Old 01-30-2008, 05:24 AM
riangeli riangeli is offline
Jaguar
 
Join Date: Jan 2008
Location: Kalajoki, Finland
Posts: 35
it wont work.. I Installed SB600_SATA_ATA.zip! it contains 2 files:

IOATAFamily.kext
AppleOnboardPCATA.kext

I put both files in extensions and fix acces.

then i try reboot. it uses normally AppleGenericPCATADriver.kext but now it used AppleOnboardPCATA.kext!
It gives me never ending IO error! about my disk0s1!

I booted up on DVD and repaired my hdd. but i didnt try repair acces?
then try boot again but it wasnt help. same IO error!
then i removed AppleOnboardPCATA.kext and buuted up normally using very slow AppleGenericPCATADriver.kext

[edit] I have installed the AppleVIAATA.kext in Wiki too!

any ideas?

Leopard 10.5.2 - AMD Athlon X2 5600+ @ 3.01Ghz - 4Gb DDR2 800Mhz - ATi Radeon HD3870 512Mb GDDR4 - 2 SATA HDD 80Gb + 320Gb.
Reply With Quote
  #8  
Old 01-30-2008, 05:47 AM
cgsheen's Avatar
cgsheen cgsheen is offline
Panther
 
Join Date: Jan 2008
Location: AZ
Posts: 247
I'm not good at installing .kexts manually so I used "Kext Helper" to install "SB600_SATA_ATA"... Don't know if that would do you any good or not. Sorry it didn't work for you.

Running both 10.5.8 and 10.6.4 on my stinking AMD/ATi machine...
Reply With Quote
  #9  
Old 01-30-2008, 06:08 AM
riangeli riangeli is offline
Jaguar
 
Join Date: Jan 2008
Location: Kalajoki, Finland
Posts: 35
ok i try that. the SB600_SATA_ATA should work for me couse its made on my Asrock ALiveXfire eSATA2!! i read it just on insanelymac!

Leopard 10.5.2 - AMD Athlon X2 5600+ @ 3.01Ghz - 4Gb DDR2 800Mhz - ATi Radeon HD3870 512Mb GDDR4 - 2 SATA HDD 80Gb + 320Gb.
Reply With Quote
  #10  
Old 01-30-2008, 06:11 AM
gully666uk gully666uk is offline
Jaguar
 
Join Date: Jan 2008
Posts: 66
iv used that kext helper to install that on a fresh install works like a charm



💡 Deploy cloud instances seamlessly on DigitalOcean. Free credits ($100) for InfMac readers.

Reply With Quote
Reply