InfiniteMac OSx86  


Reply
 
Thread tools Display modes
  #1  
Old 12-14-2008, 08:08 AM
Anarchyw Anarchyw is offline
Puma
 
Join Date: Dec 2008
Posts: 20
Question Installation after Boot

Hey all...

I have used a few of the OS X 86 dvd's, Leopard 10.5.1 - 10.5.5, currently using the iDeneb v1.3 10.5.5 w/ PPF applied. The problem im having is the same with previous seeds as well. Firstly, I will be able to boot and get to the install logo and everything is fine *sometimes its less than 5mins.. Once I get to "Select a Language..." it completely freezes up. Theres no mouse pointer (not that I see one throughout the whole process until this point anyway), the keyboard is not responding - only the F Lock key works. I have never been able to get past the Language selection and am up for any ideas that someone has...

Also, im using a microsoft key/b and mouse on ps/2 - is there anything that should be done is BIOS???
Specs: AMD Athlon™ 64 X2 Dual Core Processor 5000+ 2.61GHz - NVIDIA nForce 570 SLI rev. (Nth/bge)A1(Sth/bge)A2 - PCI-E x16 ATI Radeon X1900 Series - 2x NVIDIA nForce SATA 1TB / 1x IDE 120GB (Free) - Creative SB Audigy 2 ZS - Apple Iphone Jailbroken 2.2 8GB - NVIDIA nForce Networking Controller - 2x1GB DDR2 PC2-6400 400MHz GEIL - ASUS M2N-SLI DELUXE - DirectX 10.0

Thx
Semi.
Reply With Quote
  #2  
Old 12-14-2008, 08:20 PM
nfoav8or's Avatar
nfoav8or nfoav8or is offline
 
Join Date: Jan 2008
Location: WA, USA
Posts: 933
when you boot up, enter the boot flag: "-f -x -v"

forced load, safe mode, verbose mode...

forced loading will cause the DVD to reload all the Extensions placed on the DVD to better find the right ones for you.

safe mode because you really don't need to have everything in your hardware supported to install (it will be supported if you customize it correctly during the install, or shortly afterward when we talk you through it).

verbose mode so you can tell us exactly what the errors are or what it hangs at in the future.

EDIT: also, thanks for such a good system spec layout. it helps. you could, however, put things in a better order... (i.e. your iPhone specs in the middle of your system ones??)


Last edited by nfoav8or; 12-14-2008 at 08:23 PM.
Reply With Quote
  #3  
Old 12-14-2008, 10:01 PM
lanceomni's Avatar
lanceomni lanceomni is offline
 
Join Date: Nov 2008
Location: Florida, US
Posts: 521
My specs

You asked about my setup over on mudemi's post.

Well looks almost the same with the exception of your video card. Actually its funny you list the creative sound card. I have the exact same card & was using it when I ran XP. You might as well pull the card out and use on-board sound for now as I was never able to get it up and running. Thats actually next on my list of things to figure out.

I installed Kalyway 10.5.2 & updated using Zephyroth's Software Update to get & patch the 10.5.5 combo update. I was about to give up and then found this forum and all the helpful people on it. I give a great deal of thanks to Dies as he helped me tremendously.

As for which drivers to use for ATI boards i am not too sure. The one thing that I can help you with is your onboard lan. If your install disk does not contain the appropriate driver then you can download the one in my signature.

MOBO: Z77MX-QUO-AOS CPU: Core i7 3770K GPU: MSI N760 TF 2GD5/OC Case: Modded MacPro2,1
Memory: 32GB Corsair Vengeance (CMY32GX3M4A1600C9) Wifi: Airport Extreme bcm94321MCA BIOS: HermitCrab Labs H3A.816M
Monitor: AOC Q2963Pm 29" WFHD 2560x1080 21:9
Interests: KDE on Apple Darwin, Keeping it real with the command line, Helping those that help themselves

Last edited by lanceomni; 12-14-2008 at 10:04 PM.
Reply With Quote
  #4  
Old 12-15-2008, 02:51 AM
Anarchyw Anarchyw is offline
Puma
 
Join Date: Dec 2008
Posts: 20
Thankyou both for such quick responses... I will test it out this afternoon and hopefully get back to you asap.
Semi.

EDIT: I will arrange things in a better order, as per yours, only had time to just get the right information down and now i can arrange it more suitable. lol i had that in the back of my mind to do.

EDIT: No good, on the -x-f-v. I thought it would really work with the safemode going but it still hung at the language selection after trying twice. I seen the instructions that it goes through and there were so many errors, fails, booboos its not funny. I guess thats what comes with the osx86 setup. I can give you the details of what it says when its going through boot stages, thats no problem, hopefully we can get to the bottom of it soon. I will go with Kalyway a chance if all fails.

Thx
Semi.

Specs:AMD Athlon™ 64 X2 Dual Core Processor 5000+ 2.61GHz-ASUS M2N-SLI DELUXE-NVIDIA nForce 570 SLI-PCI-E ATI Radeon X1900 XT-2x SATA1TB / 1x IDE120GB-Audigy2ZS-NVIDIA nForce Networking Controller-2x 1GB DDR2 PC2-6400 400MHz GEIL-Apple IphoneJailbroken 2.2 8GB

Last edited by Anarchyw; 12-16-2008 at 10:07 AM. Reason: add to
Reply With Quote
  #5  
Old 12-16-2008, 12:19 PM
Anarchyw Anarchyw is offline
Puma
 
Join Date: Dec 2008
Posts: 20
k guys dont kill me for double posting...i got some new news.

this is as much as i can grab from the boot screen, hope this is helpful

Darwin/x86 boot v5.0.132 - Chameleon v1.0.11
Build date : 2008-06-09
2046MB memory
Vesa v3.0 16MB (ATI AMBIOS)
hd (0,1) Apple HFS

System Config file '/com.apple.boot.s/library/preferences/systemcinfiguration/com.apple.boot.plist' not found
{enter} /reboot at this point and wait for timer..4,3,2,1...F8
{-v -f -x}

enNForceATA: WARNING: phyconnection failed.status=0x00000000
localhost.kextd[47] can't add repository (not a directory)
setting IOcatalogue
localhost.kextd[47] root filesystem is read-only; skipping kernel link data generation
localhost DirectoryService[53] launched version 5.0 (v514)
SIGNING: cs_invalid_page: p=41(config) clearing cs_valid
localhost diskarbitration[44]: CoreRAIDServer[43]:17931 not responding
localhost diskarbitration[44]: unable to mount /dev/Disk2s1

mDNSResponder[48]:WARNING: (Status code 0x00000047)
localhost mDNSResponder[48]: couldn't read user-specified ComputerName; using Default
mDNSResponder[48]: getHelperPort: cannot contact helper
" " : mDNSKeyChainGetSecrets: Mach communication failed (IPC/SEND) invalid destination
set DomainSecrets: mDNSKeyChainGetSecrets failed error 2301 CFArray Ref 00000000
mDNSDynamicStoreSetConfig: Mach communication failed
Sandbox_init error Cannot apply named profile 'mDNSResponder' : No such Directory
localhost diskarbitration[44]: Unable to mount /dev/Disk1..

and that is not the everything that is on the screen but that is pretty much every error that i could see

where do i begin? lol...

Specs:AMD Athlon™ 64 X2 Dual Core Processor 5000+ 2.61GHz-ASUS M2N-SLI DELUXE-NVIDIA nForce 570 SLI-PCI-E ATI Radeon X1900 XT-2x SATA1TB / 1x IDE120GB-Audigy2ZS-NVIDIA nForce Networking Controller-2x 1GB DDR2 PC2-6400 400MHz GEIL-Apple IphoneJailbroken 2.2 8GB

Last edited by nfoav8or; 12-17-2008 at 03:13 AM.
Reply With Quote
  #6  
Old 12-16-2008, 01:25 PM
lanceomni's Avatar
lanceomni lanceomni is offline
 
Join Date: Nov 2008
Location: Florida, US
Posts: 521
There are a lot of posts out there that mention it being due to IDE dvd drives. Are you using the IDE hard drive at all? if not try disconnecting it and/or setting the dvd drive to master using the jumpers on the drive.

MOBO: Z77MX-QUO-AOS CPU: Core i7 3770K GPU: MSI N760 TF 2GD5/OC Case: Modded MacPro2,1
Memory: 32GB Corsair Vengeance (CMY32GX3M4A1600C9) Wifi: Airport Extreme bcm94321MCA BIOS: HermitCrab Labs H3A.816M
Monitor: AOC Q2963Pm 29" WFHD 2560x1080 21:9
Interests: KDE on Apple Darwin, Keeping it real with the command line, Helping those that help themselves
Reply With Quote
  #7  
Old 12-17-2008, 12:00 AM
Anarchyw Anarchyw is offline
Puma
 
Join Date: Dec 2008
Posts: 20
I've got the HD as the Slave and DVD drive going as the master on IDE.

EDIT: I've got a spare SATA Drive that I will try to install on and disconnect the IDE slave HD (therefore, leaving the IDE DVD connected).

Specs:AMD Athlon™ 64 X2 Dual Core Processor 5000+ 2.61GHz-ASUS M2N-SLI DELUXE-NVIDIA nForce 570 SLI-PCI-E ATI Radeon X1900 XT-2x SATA1TB / 1x IDE120GB-Audigy2ZS-NVIDIA nForce Networking Controller-2x 1GB DDR2 PC2-6400 400MHz GEIL-Apple IphoneJailbroken 2.2 8GB

Last edited by Anarchyw; 12-17-2008 at 05:57 AM.
Reply With Quote
  #8  
Old 12-17-2008, 03:16 AM
nfoav8or's Avatar
nfoav8or nfoav8or is offline
 
Join Date: Jan 2008
Location: WA, USA
Posts: 933
Quote:
Originally Posted by Anarchyw View Post
k guys dont kill me for double posting...i got some new news.

this is as much as i can grab from the boot screen, hope this is helpful

Darwin/x86 boot v5.0.132 - Chameleon v1.0.11
Build date : 2008-06-09
2046MB memory
Vesa v3.0 16MB (ATI AMBIOS)
hd (0,1) Apple HFS

System Config file '/com.apple.boot.s/library/preferences/systemcinfiguration/com.apple.boot.plist' not found
{enter} /reboot at this point and wait for timer..4,3,2,1...F8
{-v -f -x}

enNForceATA: WARNING: phyconnection failed.status=0x00000000
localhost.kextd[47] can't add repository (not a directory)
setting IOcatalogue
localhost.kextd[47] root filesystem is read-only; skipping kernel link data generation
localhost DirectoryService[53] launched version 5.0 (v514)
SIGNING: cs_invalid_page: p=41(config) clearing cs_valid
localhost diskarbitration[44]: CoreRAIDServer[43]:17931 not responding
localhost diskarbitration[44]: unable to mount /dev/Disk2s1

mDNSResponder[48]:WARNING: (Status code 0x00000047)
localhost mDNSResponder[48]: couldn't read user-specified ComputerName; using Default
mDNSResponder[48]: getHelperPort: cannot contact helper
" " : mDNSKeyChainGetSecrets: Mach communication failed (IPC/SEND) invalid destination
set DomainSecrets: mDNSKeyChainGetSecrets failed error 2301 CFArray Ref 00000000
mDNSDynamicStoreSetConfig: Mach communication failed
Sandbox_init error Cannot apply named profile 'mDNSResponder' : No such Directory
localhost diskarbitration[44]: Unable to mount /dev/Disk1..

and that is not the everything that is on the screen but that is pretty much every error that i could see

where do i begin? lol...
Please don't post with these colors unless you have specific reasons to alter the colors (such as pointing out specific variables in coded text... otherwise default works just fine. Edited...

Reply With Quote
  #9  
Old 12-19-2008, 02:43 AM
Anarchyw Anarchyw is offline
Puma
 
Join Date: Dec 2008
Posts: 20
the problem still hangs on installation screen even when ide hd is diconnected/connected and dvd drive as master on ide. Is there any ideas ?

Specs:AMD Athlon™ 64 X2 Dual Core Processor 5000+ 2.61GHz-ASUS M2N-SLI DELUXE-NVIDIA nForce 570 SLI-PCI-E ATI Radeon X1900 XT-2x SATA1TB / 1x IDE120GB-Audigy2ZS-NVIDIA nForce Networking Controller-2x 1GB DDR2 PC2-6400 400MHz GEIL-Apple IphoneJailbroken 2.2 8GB
Reply With Quote
  #10  
Old 12-19-2008, 09:40 AM
nfoav8or's Avatar
nfoav8or nfoav8or is offline
 
Join Date: Jan 2008
Location: WA, USA
Posts: 933
apart from changing over to a complete SATA install (both SATA HD and DVD), you could try manipulating some of the other boot flags out there. Here is a list of them: http://forum.insanelymac.com/lofiver...hp/t99891.html however, not all of these are correct or complete. Please use with care as misusing some of these can overheat your CPU to the point of burn-through.



💡 Deploy cloud instances seamlessly on DigitalOcean. Free credits ($100) for InfMac readers.


Reply With Quote
Reply