|
#1
|
|||
|
|||
Installation after Boot
Hey all...
I have used a few of the OS X 86 dvd's, Leopard 10.5.1 - 10.5.5, currently using the iDeneb v1.3 10.5.5 w/ PPF applied. The problem im having is the same with previous seeds as well. Firstly, I will be able to boot and get to the install logo and everything is fine *sometimes its less than 5mins.. Once I get to "Select a Language..." it completely freezes up. Theres no mouse pointer (not that I see one throughout the whole process until this point anyway), the keyboard is not responding - only the F Lock key works. I have never been able to get past the Language selection and am up for any ideas that someone has... Also, im using a microsoft key/b and mouse on ps/2 - is there anything that should be done is BIOS??? Specs: AMD Athlon™ 64 X2 Dual Core Processor 5000+ 2.61GHz - NVIDIA nForce 570 SLI rev. (Nth/bge)A1(Sth/bge)A2 - PCI-E x16 ATI Radeon X1900 Series - 2x NVIDIA nForce SATA 1TB / 1x IDE 120GB (Free) - Creative SB Audigy 2 ZS - Apple Iphone Jailbroken 2.2 8GB - NVIDIA nForce Networking Controller - 2x1GB DDR2 PC2-6400 400MHz GEIL - ASUS M2N-SLI DELUXE - DirectX 10.0 Thx Semi. |
#2
|
||||
|
||||
when you boot up, enter the boot flag: "-f -x -v"
forced load, safe mode, verbose mode... forced loading will cause the DVD to reload all the Extensions placed on the DVD to better find the right ones for you. safe mode because you really don't need to have everything in your hardware supported to install (it will be supported if you customize it correctly during the install, or shortly afterward when we talk you through it). verbose mode so you can tell us exactly what the errors are or what it hangs at in the future. EDIT: also, thanks for such a good system spec layout. it helps. you could, however, put things in a better order... (i.e. your iPhone specs in the middle of your system ones??) Last edited by nfoav8or; 12-14-2008 at 08:23 PM. |
#3
|
||||
|
||||
My specs
You asked about my setup over on mudemi's post.
Well looks almost the same with the exception of your video card. Actually its funny you list the creative sound card. I have the exact same card & was using it when I ran XP. You might as well pull the card out and use on-board sound for now as I was never able to get it up and running. Thats actually next on my list of things to figure out. I installed Kalyway 10.5.2 & updated using Zephyroth's Software Update to get & patch the 10.5.5 combo update. I was about to give up and then found this forum and all the helpful people on it. I give a great deal of thanks to Dies as he helped me tremendously. As for which drivers to use for ATI boards i am not too sure. The one thing that I can help you with is your onboard lan. If your install disk does not contain the appropriate driver then you can download the one in my signature. MOBO: Z77MX-QUO-AOS CPU: Core i7 3770K GPU: MSI N760 TF 2GD5/OC Case: Modded MacPro2,1 Memory: 32GB Corsair Vengeance (CMY32GX3M4A1600C9) Wifi: Airport Extreme bcm94321MCA BIOS: HermitCrab Labs H3A.816M Monitor: AOC Q2963Pm 29" WFHD 2560x1080 21:9 Interests: KDE on Apple Darwin, Keeping it real with the command line, Helping those that help themselves Last edited by lanceomni; 12-14-2008 at 10:04 PM. |
#4
|
|||
|
|||
Thankyou both for such quick responses... I will test it out this afternoon and hopefully get back to you asap.
Semi. EDIT: I will arrange things in a better order, as per yours, only had time to just get the right information down and now i can arrange it more suitable. lol i had that in the back of my mind to do. EDIT: No good, on the -x-f-v. I thought it would really work with the safemode going but it still hung at the language selection after trying twice. I seen the instructions that it goes through and there were so many errors, fails, booboos its not funny. I guess thats what comes with the osx86 setup. I can give you the details of what it says when its going through boot stages, thats no problem, hopefully we can get to the bottom of it soon. I will go with Kalyway a chance if all fails. Thx Semi. Specs:AMD Athlon™ 64 X2 Dual Core Processor 5000+ 2.61GHz-ASUS M2N-SLI DELUXE-NVIDIA nForce 570 SLI-PCI-E ATI Radeon X1900 XT-2x SATA1TB / 1x IDE120GB-Audigy2ZS-NVIDIA nForce Networking Controller-2x 1GB DDR2 PC2-6400 400MHz GEIL-Apple IphoneJailbroken 2.2 8GB Last edited by Anarchyw; 12-16-2008 at 10:07 AM. Reason: add to |
#5
|
|||
|
|||
k guys dont kill me for double posting...i got some new news.
this is as much as i can grab from the boot screen, hope this is helpful Darwin/x86 boot v5.0.132 - Chameleon v1.0.11 Build date : 2008-06-09 2046MB memory Vesa v3.0 16MB (ATI AMBIOS) hd (0,1) Apple HFS System Config file '/com.apple.boot.s/library/preferences/systemcinfiguration/com.apple.boot.plist' not found {enter} /reboot at this point and wait for timer..4,3,2,1...F8 {-v -f -x} enNForceATA: WARNING: phyconnection failed.status=0x00000000 localhost.kextd[47] can't add repository (not a directory) setting IOcatalogue localhost.kextd[47] root filesystem is read-only; skipping kernel link data generation localhost DirectoryService[53] launched version 5.0 (v514) SIGNING: cs_invalid_page: p=41(config) clearing cs_valid localhost diskarbitration[44]: CoreRAIDServer[43]:17931 not responding localhost diskarbitration[44]: unable to mount /dev/Disk2s1 mDNSResponder[48]:WARNING: (Status code 0x00000047) localhost mDNSResponder[48]: couldn't read user-specified ComputerName; using Default mDNSResponder[48]: getHelperPort: cannot contact helper " " : mDNSKeyChainGetSecrets: Mach communication failed (IPC/SEND) invalid destination set DomainSecrets: mDNSKeyChainGetSecrets failed error 2301 CFArray Ref 00000000 mDNSDynamicStoreSetConfig: Mach communication failed Sandbox_init error Cannot apply named profile 'mDNSResponder' : No such Directory localhost diskarbitration[44]: Unable to mount /dev/Disk1.. and that is not the everything that is on the screen but that is pretty much every error that i could see where do i begin? lol... Specs:AMD Athlon™ 64 X2 Dual Core Processor 5000+ 2.61GHz-ASUS M2N-SLI DELUXE-NVIDIA nForce 570 SLI-PCI-E ATI Radeon X1900 XT-2x SATA1TB / 1x IDE120GB-Audigy2ZS-NVIDIA nForce Networking Controller-2x 1GB DDR2 PC2-6400 400MHz GEIL-Apple IphoneJailbroken 2.2 8GB Last edited by nfoav8or; 12-17-2008 at 03:13 AM. |
#6
|
||||
|
||||
There are a lot of posts out there that mention it being due to IDE dvd drives. Are you using the IDE hard drive at all? if not try disconnecting it and/or setting the dvd drive to master using the jumpers on the drive.
MOBO: Z77MX-QUO-AOS CPU: Core i7 3770K GPU: MSI N760 TF 2GD5/OC Case: Modded MacPro2,1 Memory: 32GB Corsair Vengeance (CMY32GX3M4A1600C9) Wifi: Airport Extreme bcm94321MCA BIOS: HermitCrab Labs H3A.816M Monitor: AOC Q2963Pm 29" WFHD 2560x1080 21:9 Interests: KDE on Apple Darwin, Keeping it real with the command line, Helping those that help themselves |
#7
|
|||
|
|||
I've got the HD as the Slave and DVD drive going as the master on IDE.
EDIT: I've got a spare SATA Drive that I will try to install on and disconnect the IDE slave HD (therefore, leaving the IDE DVD connected). Specs:AMD Athlon™ 64 X2 Dual Core Processor 5000+ 2.61GHz-ASUS M2N-SLI DELUXE-NVIDIA nForce 570 SLI-PCI-E ATI Radeon X1900 XT-2x SATA1TB / 1x IDE120GB-Audigy2ZS-NVIDIA nForce Networking Controller-2x 1GB DDR2 PC2-6400 400MHz GEIL-Apple IphoneJailbroken 2.2 8GB Last edited by Anarchyw; 12-17-2008 at 05:57 AM. |
#8
|
||||
|
||||
Quote:
|
#9
|
|||
|
|||
the problem still hangs on installation screen even when ide hd is diconnected/connected and dvd drive as master on ide. Is there any ideas ?
Specs:AMD Athlon™ 64 X2 Dual Core Processor 5000+ 2.61GHz-ASUS M2N-SLI DELUXE-NVIDIA nForce 570 SLI-PCI-E ATI Radeon X1900 XT-2x SATA1TB / 1x IDE120GB-Audigy2ZS-NVIDIA nForce Networking Controller-2x 1GB DDR2 PC2-6400 400MHz GEIL-Apple IphoneJailbroken 2.2 8GB |