iPC 10.5.6 Universal Installation Problem

#1 05-23-2009, 01:39 AM

I have trouble with ipc installation here is what i got

I got the CPU Unresponsive by this screen
IMG_0045.JPG
As you can see is unresponsive
But it worked for a little then it showed the panic kernel screen
IMG_0041.JPG
and then
IMG_0042.JPG
I don't know why this happened i think a hardware error. If some one can help here it would be appreciated.How can i fix this? Also said that AppleNforceata : phy connection failed.

Here are what happened at the -v run
IMG_0043.JPG

erick2red · #2 05-23-2009, 04:26 PM

Let me understand some things,
1. You get KP even with kernel panics????
2. What happens when you boot "-x" (aka Safe Boot)?
3. What drivers options did you select when installing iPC?

#3 05-23-2009, 07:10 PM

Ok 1. I Get this in the panic.debugger called panic(cpu 3). Also"system model name:Unknow". I think is the cpu
DSCF0254.jpg
DSCF0263.jpg
2.when i x save mode. I entered correctly everything seemed to work fine until a panic came and asked me to restart the pc
also i get this lines on the screen. I don't know what they are
DSCF0256.jpg
DSCF0253.jpg
3.The driveres that i got where: (you can go to their site to see full driver options http://pcwizcomputer.com/ipcosx86/?page_id=96)

1.nvidia ninject 512 mb
2.Chipset applenforceata
3.audio: ac97
4.nforce klan driver because my lan is marvell yukon 88E116
5.USB Mount fix

erick2red · #4 05-23-2009, 08:14 PM

Ok, then "-x" booted up.
First, try to know which kernel are you using to boot:
1 . Boot "-x"
2. login an then open Terminal app
3. type "uname -a"
That the line with kernel name and others info.

Besides that, type at boot after "-x" debug=0x100, so when you the KP, shows up some info, about what cause the KP.

Have you already chck the forum for other users with running MacOSX with similar hardware???
They already know what to use to get that hardware working.

#5 05-23-2009, 08:27 PM

I tried but safe mode is giving me a reboot your pc kernel panic. i checked with -v and still cpu panic. It doesn't boot like last time. Lat time i boot into -x it lasted seconds after i logged in to the desktop and that message appeared again. and i don't know what those lines in the screen are. I think is the video card

Voyn1x · #6 05-24-2009, 02:56 PM

Try reinstalling without NVinject as you can always get your gfx card working properly later. You should always boot with -v (verbose mode) until you get your system fully working.

As it seems to be connected with your cpu, it may be worth booting with only one core for now to see if that helps matters.

At the boot prompt enter:

Code:

-v -x cpus=1

Hopefully this will get you into a stable system where you can start bug fixing.

#7 05-25-2009, 04:41 AM

Thank you so much! Vony1x it really worked i got my system stable. it is running. though it only boots correctly when i type "-v -x cpus=1" but i need to fix that bug so it runs normal. I just need to do some fixing for example the ethernet driver doesn't work it doesn't connect to the internet. I still have the lines on the screen because of the video driver, and also i need to get my q6600 fully working because i just have 1.5Ghz of processor and it says unknown but the best part is that i got it running. If you can help me fixing this bugs and problems it would be greatly appreciated.Thank You

#8 05-25-2009, 02:07 PM

Here there are some screen shots
IMG_0055.JPG
IMG_0056.JPG
IMG_0057.JPG
IMG_0058.JPG
I still have the lines one the screen tough, also it panics when it boots normally, the only way to get it stable is by booting -v -x cpus=1. Also as you can see my nvidia card is not well recognized i download a driver for it a .bundle file. iopened it and a search trough contents then i selected the driver and executed in the terminal app. it didn't install. i don't know if i need to do something before that to get it working

Voyn1x · #9 05-25-2009, 02:37 PM

This thread on insanelymac should offer you a solution for the cpus=1 to get all cores working - it seems there's issues with the nForce 570i, 590i, 610i, 630i, 650i, and 680i mobos. There's a pdf containing the correct bios options plus you may need to install an older AppleACPIPlatform.kext.

In regards to your graphics card, you should look into using an EFI gfx string, you can use a program called EFI studio which has many premade strings for most cards.