as long as you use the second test patch for amd in kalway programs like cocomodx works just fine

I don't need PPC Support, but I wonder why it doesn't work anymore!

This is the only small error that I recently experienced, everything else works great! Intel/Universal Applications work perfectly. :-)

But Rosetta is a system implementation, it has to work. Some programs still need PPC support, even as Universal Binary. Is Photoshop CS3 working? The most Adobe programs can't be slimmed with Xslimmer, so the PPC part is maybe neccessary for them. A lot of Games, VST instruments or Audio Units are still PPC.

Have you noticed that Kalyway made graphical changes in the system? I hate something like this.


@ bhast2:

At the first time I tested with the second patch the system wasn't working at all. I'm testing it again sometime.

---

2 Opteron systems: OSx86 10.5.8, Andy's 9.8.0 kernel, Asus A8N-SLI Premium, Opteron 185 o'clocked @ 2 x 2,95 GHz (2nd system 2.6 GHz), ATI Radeon HD2600XT 256MB Dual-Monitor 2x HP L2035, 4 GB RAM, Griffin FireWave as main audio device, Marvell + nForce LAN, Asus U3S6 USB3/SATA6 card, 5,5 TB harddisk, Firewire 800 card, Apple Remote + eHome IR receiver, 2x Wacom serial graphics tablet, Canon Pixma iP4700, Logitech Internet Navigator wireless keyboard/mouse combination.

My Audio stuff: M-Audio Transit USB (default audio), M-Audio ProFire 610, M-Audio ProFire Lightbridge (34 channels) using Creamware A16 ADAT converter • MIDI: M-Audio Midiman 4x MIDI interface • Behringer Audio Mixers: Xenyx 1002, Xenyx 1002FX, Xenyx 1202FX, Eurorack UB1002FX, Eurorack MX1804FX, Eurorack MX262A • FX devices: Lexicon MPX100 DSP, Behringer DSP-1000 Virtualizer, Behringer MiniFEX 800 DSP, Behringer Multicom Pro MDX4400 compressor • RETRO: MSSIAH midi/sequencer/synthesizer cardridge for the C64 (Dual-SID), Steinberg M.S.I. MIDI Interface for C64

Well I've just installed Kalyways and I'm having dramas with AHCI. Without AHCI enabled in Bios I'd be stuck with "root device" loop. But with AHCI my drives seem to be very slow. I've copied the IOATAFamliy.kext from my Zeph install and it now boots in Native IDE(only in verbose however), but it still seems to be a little slow. Any ideas or suggestions?

My Xbench without a disk test scores about 166.69. With a disk test about 21.25!

MSI K9AGM2
3Ghz AMD 64x2 6000+
MSI Geforce Nx8600GT
Kalyway 10.5.2 IDE
DVD IDE
2 x External USB

---

My Hackintosh:
Kalyway 10.5.2 Intel/Amd -- Speedstep, Netkas Smbios, AMD test patch 2.
Mobo: MSI K9AGM2
Chipset: AMD 690v ATISB600 -- SB600ATA kexts
CPU: 3Ghz AMD Athlon 64x2 6000+
Ram: 2gb Rambo DDRii 667
Graphics: Nvidea MSI nx8600GT 512MB -- NvInject 512 (fully supported 100% working)
Audio~External: Focusrite Saffire -- (100% working - ootb)
Ethernet: 8101E -- Realtek R1000 (100% working)
HDD: 320GB WD SataII (150gb Boot Partition)
150gb Lacie Firewire/USB RIP my dear Lacie.

Nevermind,

My biggest problem was not having the SB600ATA kexts. Patched the DVD. And I can honestly say it's been the smoothest most stable install I've done, (and a hell of a lot quicker too!)

Cheers Kalyway, now I can enjoy this machine as opposed to the thoughts of beating it to death with the keyboard!!

---

My Hackintosh:
Kalyway 10.5.2 Intel/Amd -- Speedstep, Netkas Smbios, AMD test patch 2.
Mobo: MSI K9AGM2
Chipset: AMD 690v ATISB600 -- SB600ATA kexts
CPU: 3Ghz AMD Athlon 64x2 6000+
Ram: 2gb Rambo DDRii 667
Graphics: Nvidea MSI nx8600GT 512MB -- NvInject 512 (fully supported 100% working)
Audio~External: Focusrite Saffire -- (100% working - ootb)
Ethernet: 8101E -- Realtek R1000 (100% working)
HDD: 320GB WD SataII (150gb Boot Partition)
150gb Lacie Firewire/USB RIP my dear Lacie.

I install just fine, but I can't seem to boot at all. So far I get a kernel panic with speedtestkernel, modbinkernel doesn't seem to work, and the sleepkernel has IOATA Error that keeps popping up. Either way I am having problems getting into the OS.. Also I have to boot with -x to boot off the DVD and be able to get anywhere past Choose Your Language screen.

AMD Opteron 165
DFI Ultra-D nForce4 Ultra
2gb G.Skill
WD 120gb SATA (Leo)
WD 250gb SATA (TimeMachine)
WD 250gb SATA (Windows XP)
WD 500gb SATA (Files)
Broadcom WiFi

Got it working! Apparently all I needed was good nights sleep and I got it all sorted. Couple problems though, Restart doesn't work all the way (using the SleepKernel) I get to where the screen blacks out right before the BIOS screen pops up, and it stops, so I have to hit the reset button every time. It doesn't follow through all the way. Second is About this Mac doesn't work, it crashes Finder or something. I installed AppleSMBIOS-27-Default. DVD Player works though.
GUID, and Sleep works now too, which hasn't in any I've tried yet, so I am happy Overall I am pretty happy with this release, it seems pretty solid and fast. Any suggestions?