Thread: Kexts problem?
View Single Post
 
Old 01-31-2010, 12:32 PM
eXtremee eXtremee is offline
Cheetah
 
Join Date: Jul 2009
Posts: 5
t.y. for posting, the problem is i have waiting for system root before installation, on ideneb's installation launches fine, and on installation start(just after customize) it like freezes, mouse is working, but no time is showing, and dvd-rom isn't reading anything, in installation log it is stopped at validating package payload.(it was ideneb 10.5.7, i tried other ideneb but don't remember where i couldn't get installation)
On iatkos 10.5.7 i have same problem
On ipc 10.5.6(tried different releases with different ppf) as i remember after installation i have waiting for system root, if i would know where to copy nforce kext from iatkos 10.5.5 release, i could use with my windows macdrive and add that kext to launch, but don't know how to copy from iatkos.
i don't rem now a lot of releases i tried, but only with 1 release installation and booting up to mac os was fine - iatkos 10.5.5
Problem is i have 7.1channel audio and i couldn't get it to work, searched though posts,posted new thread - no help, my sound driver is VIA vt1708s - build in mainboard. Tried diff drivers, azalia, voodoo hd(or something like that), tried drivers from via vt1708b(or something like that, same audio but only 5.1 output) - no result, osx showed no audio connected at all.
Other iatkos problem was - network - tried different kexts - created new thread in forum - no1 could help, this is the copy of my thread exluding my pc stats in there:
---------------------------------
"Hey all.
...
I tried installing a lot of osx86 releases such as ipc 10.5.6/10.5.8, i deneb 10.5.5, 10.5.6, 10.5.8, ipc - gaved me error that i couldn't fix, ideneb 10.5.8 - couldn't install(bug at installation start), ideneb 10.5.6 - couldn't fix
So i used to use ideneb:
Voodo kernel didn't worked, so i used 9.4.0 kernel(don't remember the name of it)+amd patch = amd works
nvinject 512mb = video card works
nforceata(or smth like that) chipset driver
And that's the problem:
I have onboard lan(mcp78 @ nforce720d - in device id chipset shown not as 720, as nvidia geforce 8200 chipset)
Also i have pci card dlink dfe 520tx.
My it configurated for me that any mac address will be accepted.

When i use forcedeth - no ethernet is shown.
When i use nforcelan driver - ethernet is shown, but cable is plugged or not - it always shows connected, but when i try safari - instant text that sayes i'm not connected to internet - troubleshooting shows: 2 of 5 green lights(all green till asp).
When i use viarhine(for d-link pci card) - it shows when cable is plugged or not - when i connect it, configure - safari shows bar that loading a webpage, but a little later - error that don't have internet connection.Troubleshooting - shows 2(sometimes 3, then immediately 2) green lights, and internet and last1 shown as yellow or red.
Troubleshooting didn't fixed anything.
I use my Internet Provider gived internet configuration, so i always use "manual" config with ip/mask/router/and 2 dns servers.

So i need help ;/

btw: i have 7.1 chan audio onboard(VIA VT1708S), as far from reading posts all info about drivers i found only 2 drivers for my card: azalio audio and voodoohd - both didn't worked.

Maby something with nforce chipset driver? Hope some1 will help ;/
Btw i also tried apple yukon fix. "
---------------------------------
Gonna try iatkos 10.5.5 again in these days. Btw in post about network - "couldn't fix" = couldn't boot after installation.

Btw: after talking long time ago with my Internet Provider - i managed to get free mac address, i mean i can connect and use internet with any mac address, so problem couldn't be in mac address.





My mistake! I could get to work not that iatkos 10.5.5, i could get ideneb 10.5.5!!!

Last edited by eXtremee; 01-31-2010 at 12:40 PM.
Reply With Quote