|
04-18-2010, 01:41 AM
|
|
|
|
Join Date: Jul 2009
Location: Germany
Posts: 779
|
|
Quote:
Originally Posted by Undiscovered
I have an IDE drive.
|
K. Is there another device beeing connected to the same cable?
40-Pin IDE cable can connect a master and a slave device at a time - which one of them is beeing used as which is configured using a jumper you'll find on the back of any IDE device:
(1 = Master, 2=Slave)
Be sure to have the IDE device beeing connected to the outer-port, beeing jumped as Master & the one beeing connected to the inner-port beeing jumped as Slave.
I am running nForce 4 mainboard myself and expired my IDE configuration not to work properly on OS X without having it beeing seted up this way, although it worked fine on other OS with my previous configuration...
I hope this will gonna work in your case too. 
//Edit:
Beforce I forget - I should properbly tell you, that there is no support for your onboard GFX on OS X. So if you want to have working graphic accerlation, you might need to add a supported graphics card to your setup...
AMD Phenom II X4 955 - ASRock AM3A770DE - 8GB DDR3-1333 - Radeon HD 5570 1GB passiv - BCM4318 802.11b/g - Snow Leopard Retail
+++
AMD Phenom X3 8450 - ASRock AM2NF6G-VSTA (BIOS L2.39) - 4GB DDR2-800 - Radeon HD 4650 512MB - Snow Leopard Retail (retired) / OpenBSD
Last edited by Imkantus; 04-18-2010 at 01:47 AM.
|