![]() |
#1
|
|||
|
|||
Hi,
I have formatted my whole drive and installed Leopard succesfully and using it right now as my primary system! But I've got one problem! Ive got two hard drives in my computer, the first and biggest one is recognised and on that one if installed Leopard, but the 2nd isnt recognised, how do I get that one working? Thanks! |
#2
|
||||
|
||||
How do you have your drives connected? Do you have two Systems Windows + Mac or two Mac HDs?
If it's IDE, do you have two controllers (Primary and Secondary) Connect both hard drives to Primary, the Mac drive as Master. Connect DVD drives to the secondary port. Check the jumpers. If it's SATA, is your chipset supported? Perhaps drives are disabled in the BIOS (Detection set to None instead of Auto). We need some infos about your hardware setup, especcially the mainboard. 2 Opteron systems: OSx86 10.5.8, Andy's 9.8.0 kernel, Asus A8N-SLI Premium, Opteron 185 o'clocked @ 2 x 2,95 GHz (2nd system 2.6 GHz), ATI Radeon HD2600XT 256MB Dual-Monitor 2x HP L2035, 4 GB RAM, Griffin FireWave as main audio device, Marvell + nForce LAN, Asus U3S6 USB3/SATA6 card, 5,5 TB harddisk, Firewire 800 card, Apple Remote + eHome IR receiver, 2x Wacom serial graphics tablet, Canon Pixma iP4700, Logitech Internet Navigator wireless keyboard/mouse combination. My Audio stuff: M-Audio Transit USB (default audio), M-Audio ProFire 610, M-Audio ProFire Lightbridge (34 channels) using Creamware A16 ADAT converter • MIDI: M-Audio Midiman 4x MIDI interface • Behringer Audio Mixers: Xenyx 1002, Xenyx 1002FX, Xenyx 1202FX, Eurorack UB1002FX, Eurorack MX1804FX, Eurorack MX262A • FX devices: Lexicon MPX100 DSP, Behringer DSP-1000 Virtualizer, Behringer MiniFEX 800 DSP, Behringer Multicom Pro MDX4400 compressor • RETRO: MSSIAH midi/sequencer/synthesizer cardridge for the C64 (Dual-SID), Steinberg M.S.I. MIDI Interface for C64 |
#3
|
|||
|
|||
I have two official Windows HDs, my first drive is a SATA and its detected, the second one is IDE and isnt detected..
I have a Nforce motherboard, Asrock AliveNF5SLI-1394 motherboard. |
#4
|
||||
|
||||
Do you have Win + Mac on one HD or are you using seperate HDs? I always would recommend this. Why IDE HD's aren't detected I don't understand becuase it's normally better supported than SATA. It is detected in Windows or in the BIOS? Are you using an 80-pin cable?
2 Opteron systems: OSx86 10.5.8, Andy's 9.8.0 kernel, Asus A8N-SLI Premium, Opteron 185 o'clocked @ 2 x 2,95 GHz (2nd system 2.6 GHz), ATI Radeon HD2600XT 256MB Dual-Monitor 2x HP L2035, 4 GB RAM, Griffin FireWave as main audio device, Marvell + nForce LAN, Asus U3S6 USB3/SATA6 card, 5,5 TB harddisk, Firewire 800 card, Apple Remote + eHome IR receiver, 2x Wacom serial graphics tablet, Canon Pixma iP4700, Logitech Internet Navigator wireless keyboard/mouse combination. My Audio stuff: M-Audio Transit USB (default audio), M-Audio ProFire 610, M-Audio ProFire Lightbridge (34 channels) using Creamware A16 ADAT converter • MIDI: M-Audio Midiman 4x MIDI interface • Behringer Audio Mixers: Xenyx 1002, Xenyx 1002FX, Xenyx 1202FX, Eurorack UB1002FX, Eurorack MX1804FX, Eurorack MX262A • FX devices: Lexicon MPX100 DSP, Behringer DSP-1000 Virtualizer, Behringer MiniFEX 800 DSP, Behringer Multicom Pro MDX4400 compressor • RETRO: MSSIAH midi/sequencer/synthesizer cardridge for the C64 (Dual-SID), Steinberg M.S.I. MIDI Interface for C64 |
#5
|
|||
|
|||
Im not running Win anymore! I just have Leopard installed on the main sata disk, but the system doesnt recognised my other IDE harddrive
|
#6
|
||||
|
||||
On which port is it connected? Are you using Cable Select or have you manually jumpered to Master or Slave? What about the cable, 80 pin or 40 pin?
2 Opteron systems: OSx86 10.5.8, Andy's 9.8.0 kernel, Asus A8N-SLI Premium, Opteron 185 o'clocked @ 2 x 2,95 GHz (2nd system 2.6 GHz), ATI Radeon HD2600XT 256MB Dual-Monitor 2x HP L2035, 4 GB RAM, Griffin FireWave as main audio device, Marvell + nForce LAN, Asus U3S6 USB3/SATA6 card, 5,5 TB harddisk, Firewire 800 card, Apple Remote + eHome IR receiver, 2x Wacom serial graphics tablet, Canon Pixma iP4700, Logitech Internet Navigator wireless keyboard/mouse combination. My Audio stuff: M-Audio Transit USB (default audio), M-Audio ProFire 610, M-Audio ProFire Lightbridge (34 channels) using Creamware A16 ADAT converter • MIDI: M-Audio Midiman 4x MIDI interface • Behringer Audio Mixers: Xenyx 1002, Xenyx 1002FX, Xenyx 1202FX, Eurorack UB1002FX, Eurorack MX1804FX, Eurorack MX262A • FX devices: Lexicon MPX100 DSP, Behringer DSP-1000 Virtualizer, Behringer MiniFEX 800 DSP, Behringer Multicom Pro MDX4400 compressor • RETRO: MSSIAH midi/sequencer/synthesizer cardridge for the C64 (Dual-SID), Steinberg M.S.I. MIDI Interface for C64 |
#7
|
|||
|
|||
I have it manually jumpered it to Slave and its connected with the Slave Cable its a 40pin cable! The bios does find it, but mac doesnt
|
#8
|
|||
|
|||
Ok he does find it now but I get this error! Look at the picture!
|
#9
|
||||
|
||||
drive either needs to be put in pc with xp and checkdisk run or shutdown properly
![]() |
#10
|
|||
|
|||
ntfs-3g just sucks, ive downloaded: http://www.paragon-software.com/home/ntfs-mac/download.html
and everything is working perfectly, sadly its a paid program, and only 10 day trial. 💡 Deploy cloud instances seamlessly on DigitalOcean. Free credits ($100) for InfMac readers. |