|
#1
|
|||
|
|||
AMD Problem
I'm trying to figure out what i'm doing wrong here.
I used the modcd 0.3 to get 10.6.3 disk to boot and everythings fine but around the 17-18 minute mark i get this. http://i564.photobucket.com/albums/s...4/IMG_3264.jpg What am i doing wrong? Any help would be appreciated thanks. AMD Athlon x2 +6000 4GB ddr2 Ram 40GB IDE drive (Install) M2a-vm HDMI sb600 ATI HD 4550 |
#2
|
||||
|
||||
1. Load Optimized Defaults (Reboot)
2. Bios enable Sata Mode AHCI 3. AMD C1E (Disabled) 4. ACPI Suspend Mode -> S3 5. AMD Cool&Quite Disabled But i hardly doubt u will get success out of your Graphicscard !!! if u even get in to the system with it And Try again ! AMD Phenom x4 955 3,2 GHZ Black Edition AMD Tutorial (German)Graka: ATI HD 5770 (Batmobil) 1 GB DDR5 (GIGABYTE) Lion 10.7 Kexts / Vervet Framebuffer Mem: 8 GIG RAM Kingston 4x2 OS: Snow Leopard Retail 10.6.8 Legacy Kernel V8 2 AnV cparm Boot Beta 3 Mobo: GA-MA-770 UD3 (GIGABYTE) Another AMD Tutorial (English) http://f.cl.ly/items/0M2n330k2r2j2L1q2a2g/logo.png |
#3
|
|||
|
|||
okay, ill try that but what does that kernel panic mean anyways?
thanks |
#4
|
|||
|
|||
Quote:
but i have a hunch. It kps around the time when all the installation files are copied to the HD and it starts extracting. Maybe there is something off about the driver. another thing, the atiati kext only detects my SATA dvd drive and the ATA hd is detected by something called AppleServerWorksATA maybe its the driver. |
#5
|
|||
|
|||
Quote:
Missing Framebuffer will cause X2000 kext to panic on first boot - move it to some other folder from Single User mode or via Terminal from the installation system. But this is not the problem here. shakthi124, try some different Boot CD - I always had problems with the installation system running the latest legacy kernel builds, while using the old quoopz patch works best for installation. My fav is still some pretty old Release of prasys's EmpireEFI: http://www.mediafire.com/?m5wzzwyfg4m - give it a try. AMD Phenom II X4 955 - ASRock AM3A770DE - 8GB DDR3-1333 - Radeon HD 5570 1GB passiv - BCM4318 802.11b/g - Snow Leopard Retail
+++ AMD Phenom X3 8450 - ASRock AM2NF6G-VSTA (BIOS L2.39) - 4GB DDR2-800 - Radeon HD 4650 512MB - Snow Leopard Retail (retired) / OpenBSD |
#6
|
|||
|
|||
really? can you teach me how exactly to do that? xD i have no idea sorry for sounding like a n00b
as for the booting i got it to work by making my own bootcd and adding disabler.kext all thats missing is the graphics.. |
#7
|
|||
|
|||
Quote:
In case ATIRadeonX2000.kext causes a Kernel Panic add -s bootflag and move that Kernel Extension to some different folder - be sure to place it back later in order to have proper working gfx acceraltion. Your graphic cards device ID needs to be added into Info.plist of ATI4600Controller.kext - this will make the framebuffer driver work (resolution change), what will prevent X2000 kext from causing a panic. Maybe read through some of the Radeon HD topics like thise one: http://osx86.co/f36/support-for-some...emerged-t6326/ (I know it is not about your device, but it will help you getting an idea, how to handle this stuff...) In case of using a SATA DVD drive, get an IDE one instead & be sure to have a proper Master / Slave configuration, no Cable Select - should fix your chipset driver problem. AMD Phenom II X4 955 - ASRock AM3A770DE - 8GB DDR3-1333 - Radeon HD 5570 1GB passiv - BCM4318 802.11b/g - Snow Leopard Retail
+++ AMD Phenom X3 8450 - ASRock AM2NF6G-VSTA (BIOS L2.39) - 4GB DDR2-800 - Radeon HD 4650 512MB - Snow Leopard Retail (retired) / OpenBSD Last edited by Imkantus; 09-01-2011 at 10:36 PM. |
#8
|
|||
|
|||
so i did as you said and the following things happened.
1) on the bootloader it says "Graphics Card not supported!" 2) no resolution change and this is whats shown on system profiler. Quote:
did i do something wrong? thanks also i would like to note that i have 512mb of vram :S |
#9
|
||||
|
||||
SAAAweet didnt know that...Noticed
AMD Phenom x4 955 3,2 GHZ Black Edition AMD Tutorial (German)Graka: ATI HD 5770 (Batmobil) 1 GB DDR5 (GIGABYTE) Lion 10.7 Kexts / Vervet Framebuffer Mem: 8 GIG RAM Kingston 4x2 OS: Snow Leopard Retail 10.6.8 Legacy Kernel V8 2 AnV cparm Boot Beta 3 Mobo: GA-MA-770 UD3 (GIGABYTE) Another AMD Tutorial (English) http://f.cl.ly/items/0M2n330k2r2j2L1q2a2g/logo.png |
#10
|
|||
|
|||
Even I am facing a problem during the main installation process.After the main installation process starts,the screen looks like this
And suddenly after this it throws me this kernel panic error Please help me out as I guess i'm in the last stages of the installation.I selected no additional kernels except the default main 6 gb one. My specs are as follows: Amd phenom x3 8650 2.3ghz Asus M2n68 amplus transcend 2gb ddr2 800 mhz dynet 2gb ddr2 800 mhz seagate 1tb sata internal seagate 500 gb sata internal 450w odyssey smps Windows 7 Ultimate |