|
09-01-2011, 04:09 AM
|
|
Jaguar
|
|
Join Date: Aug 2009
Location: Charlotte, NC
Posts: 62
|
|
|
What is your disk0s1? Did you install Chameleon onto and EFI partition or to Extra on your boot disk? The rest of the output looks pretty normal for an AMD system. Also, if you're not using try removing ATY_Init.kext. I am starting to think it's graphics related. ATY_Init.kext will probably boot in safe mode as well, causing it to not load the desktop if it's not properly configured. I would see if you can also try removing your device id from ATI5000Controller.kext and ATIRadeonX3000.kext and see if you can get to the desktop. If so, update to 10.6.8 and put "npci=0x2000" in your boot flags and use AnV's latest 10.6.8 kernel. 10.6.8 has automatic IOPCI detection which will automatically choose the right framebuffer for your GPU. I would worry about getting GPU working after getting it to boot properly first.
Hackintosh 1: OS X 10.6.8 / Antec P180B / Gigabyte GA-MA790FX-DS5 / Phenom II x2 550 @ 3.4 GHz / 2x1GB Corsair Dominator DDR2 1066 MHz / Gigabyte Radeon 4550 512MB / ASUS EAH4870X2 2GB@ 800/950 / 2x150GB Velociraptors RAID 0
Hackintosh 2: OS X 10.6.8 / Full-ATX Mac Pro case / Gigabyte GA-MA790FX-UD5P / Phenom x4 9950 @3.2GHz / 4x2GB Corsair Dominator DDR2 1066 MHz / HIS Radeon HD 6950 u/l to 6970 / 2x300GB Velociraptors RAID 0 / 4x2TB WD20EARS Pictures
|