#331
|
|||
|
|||
A fews week ago I installed 10.6.2 using this guide. After a day or two everything was okay (most problems were related to getting QE/CI to work on my gtx275). So first: thanks to all contributors of this thread.
Not all dsdt patches were applied so I still have some shutdown irregularities. Today my hack went to sleep and gfx card fans went spinnging full speed. I held down the power button for five seconds to make it reboot. But during reboot i gets stuck now. Starting up using safe/verbose mode reports that it enters fsck_hfs and it doens't progress after ** Checking catalog file. I tried repairing it through disk utility on a macbook but everything seems ok from there. then i tried fsck -fy /dev/diskXsX in terminal this is the output Quote:
Last edited by mecanoiz; 03-01-2010 at 09:32 PM. |
#332
|
|||
|
|||
Quote:
thank you... |
#333
|
|||
|
|||
hello,
To get rid of NullCPUPowermanagement/Disabler/SleepEnabler and to have low cpu temp/power consumption we must bringup SpeedStepping with AppleIntelCPUPowermanagement.kext. We must patch and integrate the SSDT into the DSDT. did anyone know how? thank you! |
#334
|
|||
|
|||
DSDT is configuration specific, it depends on amount of RAM and type of CPU used. I may post a list of all patches I used in the near future, the only thing that may be added is speedstepping and therefor a proper cpu temperature... but I haven't botherd that much with it. It may also be possible to get full audio and network detection in it...
The E/E/ only contains 'fakesmc' the E/ folder only contains DSDT.aml and com.apple.Boot.plist. The S/L/E/ folder only contains the 2 injectors for audio and lan. Can you post your BIOS settings? |
#335
|
|||
|
|||
You can take a look at the DSDT i am using for the Asus P5K-E WIFI 4gb ram e2160...
|
#336
|
|||
|
|||
Help with download
Dear all! I can not download files for P5K-E Wifi A/P -64 bit mode from http://www.megaupload.com/?d=MGUAATG6
Is there other link? Or can you email me the file? Thank you. |
#337
|
|||
|
|||
2 Graficcards
Hello i have a problem.
Lateinische Umschrift anzeigen I would like to install on my Asus P5K-E WiFi, a second vga card. I have 2x Geforce 8600 GT with 256MB. Unfortunately, I do not get 2 graphics cards to run simultaneously. See picture. If only one card had it, everything goes, it does not matter in which the 2 PCIE slots you inside it. It is only when I go both remove the DSDT file. Can someone help me? PS: Sorry for my bad English! Last edited by drapple; 03-10-2010 at 07:30 AM. |
#338
|
|||
|
|||
This is just a summary of several dsdt fixes working for this board. I'm not the one who invented any of these patches, but I don't know the names of all contributors anymore... See it as a guide, and notice the //- or //+.
Code:
### several DSDT patches for optimizing p5k-e-wifi/ap bios 1202 ###fix for adding fixes Method (NPTS, 1, NotSerialized) { } //+ Method (DTGP, 5, NotSerialized) { If (LEqual (Arg0, Buffer (0x10) { /* 0000 */ 0xC6, 0xB7, 0xB5, 0xA0, 0x18, 0x13, 0x1C, 0x44, /* 0008 */ 0xB0, 0xC9, 0xFE, 0x69, 0x5E, 0xAF, 0x94, 0x9B })) { If (LEqual (Arg1, One)) { If (LEqual (Arg2, Zero)) { Store (Buffer (One) { 0x03 }, Arg4) Return (One) } If (LEqual (Arg2, One)) { Return (One) } } } Store (Buffer (One) { 0x00 }, Arg4) Return (Zero) //+ } Method (NWAK, 1, NotSerialized) { } ###shutdown fix Device (SBRG) { Name (_ADR, 0x001F0000) //+ OperationRegion (LPC0, PCI_Config, 0xA0, 0x54) //+ Field (LPC0, AnyAcc, NoLock, Preserve) //+ { //+ , 10, //+ XPME, 1, //+ Offset (0x04), //+ AG3E, 1, //+ Offset (0x50), //+ RCBA, 32 //+ } Device (IELK) Method (_PTS, 1, NotSerialized) { //+ If (LEqual (Arg0, 0x05)) //+ { //+ Store (One, \_SB.PCI0.SBRG.AG3E) //+ } //+ Else //+ { Store (Arg0, DBG8) PTS (Arg0) Store (Zero, Index (WAKP, Zero)) Store (Zero, Index (WAKP, One)) If (LAnd (LEqual (Arg0, 0x04), LEqual (OSFL (), 0x02))) { Sleep (0x0BB8) } Store (ASSB, WSSB) Store (AOTB, WOTB) Store (AAXB, WAXB) Store (Arg0, ASSB) Store (OSFL (), AOTB) Store (Zero, AAXB) //+ } } ### AppleIntelCPUPowerManagment.kext kernelpanic fix, hpet / rtc / tmr #not that good for quadcores? Device (PIC) { Name (_HID, EisaId ("PNP0000")) Name (_CRS, ResourceTemplate () { IO (Decode16, 0x0020, // Range Minimum 0x0020, // Range Maximum 0x00, // Alignment 0x02, // Length ) IO (Decode16, 0x00A0, // Range Minimum 0x00A0, // Range Maximum 0x00, // Alignment 0x02, // Length ) //- IRQNoFlags () //- {2} }) Device (TMR) { Name (_HID, EisaId ("PNP0100")) Name (_CRS, ResourceTemplate () { IO (Decode16, 0x0040, // Range Minimum 0x0040, // Range Maximum //+- 0x01, // Alignment 0x04, // Length ) //- IRQNoFlags () //- {0} //+ IO (Decode16, //+ 0x0050, // Range Minimum //+ 0x0050, // Range Maximum //+ 0x01, // Alignment //+ 0x04, // Length //+ ) }) } Device (RTC0) { Name (_HID, EisaId ("PNP0B00")) Name (_CRS, ResourceTemplate () { IO (Decode16, 0x0070, // Range Minimum 0x0070, // Range Maximum 0x00, // Alignment 0x02, // Length ) //- IRQNoFlags () //- {8} }) } Device (HPET) { Name (_HID, EisaId ("PNP0103")) Name (CRS, ResourceTemplate () { //+ IRQNoFlags () //+ {0} //+ IRQNoFlags () //+ {8} Memory32Fixed (ReadOnly, 0xFED00000, // Address Base 0x00000400, // Address Length _Y09) }) ### internal SATA ports shown as internal Intel ESB2 sata ports Device (SATA) { Name (_ADR, 0x001F0002) Name (^NATA, Package (0x01) { 0x001F0002 }) Name (\FZTF, Buffer (0x07) { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5 }) Name (REGF, One) //+ Method (_DSM, 4, NotSerialized) //+ { //+ Store (Package (0x02) //+ { //+ "device-id", //+ Buffer (0x04) //+ { //+ 0x81, 0x26, 0x00, 0x00 //+ } //+ }, Local0) //+ DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) //+ Return (Local0) //+ } Method (_REG, 2, NotSerialized) ### usb ports show as internal usbport for fixing sleep, a lot of work Device (EUSB) { Name (_ADR, 0x001D0007) Method (_PRW, 0, NotSerialized) { Return (GPRW (0x0D, 0x04)) } //+ Method (_DSM, 4, NotSerialized) { Store (Package (0x02) { "device-id", Buffer (0x04) { 0x3A, 0x3A, 0x00, 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) //+ } } Device (USBE) { Name (_ADR, 0x001A0007) Method (_PRW, 0, NotSerialized) { Return (GPRW (0x0D, 0x04)) } //+ Method (_DSM, 4, NotSerialized) { Store (Package (0x02) { "device-id", Buffer (0x04) { 0x3C, 0x3A, 0x00, 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) //+ } } Method (_PRW, 0, NotSerialized) { Return (GPRW (0x03, 0x04)) } //+ Method (_DSM, 4, NotSerialized) { Store (Package (0x02) { "device-id", Buffer (0x04) { 0x34, 0x3A, 0x00, 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) //+ } Method (_PRW, 0, NotSerialized) { Return (GPRW (0x04, 0x04)) } //+ Method (_DSM, 4, NotSerialized) { Store (Package (0x02) { "device-id", Buffer (0x04) { 0x35, 0x3A, 0x00, 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) //+ } Method (_PRW, 0, NotSerialized) { Return (GPRW (0x0C, 0x04)) } //+ Method (_DSM, 4, NotSerialized) { Store (Package (0x02) { "device-id", Buffer (0x04) { 0x36, 0x3A, 0x00, 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) //+ } Method (_PRW, 0, NotSerialized) { Return (GPRW (0x0E, 0x04)) } //+ Method (_DSM, 4, NotSerialized) { Store (Package (0x02) { "device-id", Buffer (0x04) { 0x37, 0x3A, 0x00, 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) //+ } Method (_PRW, 0, NotSerialized) { Return (GPRW (0x05, 0x04)) } //+ Method (_DSM, 4, NotSerialized) { Store (Package (0x02) { "device-id", Buffer (0x04) { 0x38, 0x3A, 0x00, 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) //+ } Method (_PRW, 0, NotSerialized) { Return (GPRW (0x20, 0x04)) } //+ Method (_DSM, 4, NotSerialized) { Store (Package (0x02) { "device-id", Buffer (0x04) { 0x39, 0x3A, 0x00, 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) //+ } ### Network adapter will be shown as onboard fixes UUID/timemachine etc Device (P0P9) { Name (_ADR, 0x001C0005) Method (_PRW, 0, NotSerialized) { Return (GPRW (0x09, 0x04)) } Method (_PRT, 0, NotSerialized) { If (PICM) { Return (AR09) } Return (PR09) } //+ Device (GIGE) { Name (_ADR, Zero) OperationRegion (GPIO, SystemIO, 0x0800, 0x06) Field (GPIO, ByteAcc, NoLock, Preserve) { GO01, 8, GO02, 8, GO03, 8, GO04, 8, GO05, 8, GP9, 1 } Name (_PRW, Package (0x02) { 0x09, 0x03 }) Method (EWOL, 1, NotSerialized) { If (LEqual (Arg0, One)) { Or (GP9, One, GP9) } Else { And (GP9, Zero, GP9) } If (LEqual (Arg0, GP9)) { Return (Zero) } Else { Return (One) } } //+ } } Device (GBEC) ### azalia/hdef AppleHDA compatible inject Method (_PRW, 0, NotSerialized) { Return (GPRW (0x20, 0x04)) } //+ Device (HDEF) { Name (_ADR, 0x001B0000) Method (_DSM, 4, NotSerialized) { Store (Package (0x08) { "codec-id", Buffer (0x04) { 0x9B, 0x82, 0x43, 0x10 }, "layout-id", Buffer (0x04) { 0x0C, 0x00, 0x00, 0x00 }, "device-type", Buffer (0x17) { "Analog Devices AD1988B" }, "PinConfigurations", Buffer (0x20) { /* 0000 */ 0x30, 0x40, 0x21, 0x01, 0x10, 0x40, 0x11, 0x01, /* 0008 */ 0x40, 0x90, 0xA1, 0x01, 0x50, 0x30, 0x81, 0x01, /* 0010 */ 0x60, 0x10, 0x01, 0x01, 0x20, 0x90, 0xA1, 0x01, /* 0018 */ 0xF0, 0x11, 0x45, 0x01, 0x70, 0x60, 0x01, 0x01 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } //+ } } Scope (\_GPE) ### injecting ATI videocard with DSDT #use Wormy/x1600 Megalodon/2600/3870 Motmot/4870 Device (P0P2) { Name (_ADR, 0x00010000) //+ Device (GFX) { Name (_ADR, Zero) Name (_SUN, One) Method (_DSM, 4, NotSerialized) { Store (Package (0x16) { "@0,compatible", Buffer (0x0E) { "ATY,Megalodon" }, "@0,device_type", Buffer (0x08) { "display" }, "@0,display-connect-flags", Buffer (0x02) { 0x00, 0x04 }, "@0,name", Buffer (0x0E) { "ATY,Display_A" }, "@1,compatible", Buffer (0x0E) { "ATY,Megalodon" }, "@1,device_type", Buffer (0x08) { "display" }, "@1,display-connect-flags", Buffer (0x02) { 0x00, 0x04 }, "@1,name", Buffer (0x0E) { "ATY,Display_B" }, "device_type", Buffer (0x14) { "ATY,MegalodonParent" }, "model", Buffer (0x19) { "ATI Radeon HD2600 Series" }, "rom-revision", Buffer (0x06) { "3169a" } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } //+ } Method (_PRW, 0, NotSerialized) { Return (GPRW (0x09, 0x04)) } Method (_PRT, 0, NotSerialized) { If (PICM) { Return (AR02) } Return (PR02) } } ### Snow Leopard extra sleep fix? Return (WAKP) //+ Return (Package (0x02) { Zero, Zero //+ }) |
#339
|
|||
|
|||
Nice. Thanks a lot.
|
#340
|
|||
|
|||
can someone help me, I used this guide, currently running 10.6.2 using the updated sleepenabler. Is there anyway for me to just use a DSDT file instead of all these kexts in my extra folder along with a DSDT?
I would like to clean out my Extra folder but don't know what is needed, if it helps: ASUS P5K-e wifi, 1305 bios Jmicron disabled, only onboard sound\ethernet enabled. all drives are SATA AHCI (dvd, and hard drives) e6600, 4gb ddr2 667mhz I dunno how to make dsdt file, my current file I downloaded on the first pages of this thread, and it has worked so I left it, but I would love to clean out extra kext's I don't need. 💡 Deploy cloud instances seamlessly on DigitalOcean. Free credits ($100) for InfMac readers. |