[How-To] Snow Leopard Retail (10A432) on P5K-E Wifi A/P -64 bit mode - Page 37

lukelovett · #**361** 11-11-2010, 02:36 PM

Quote:

Originally Posted by lidas

I have a problem
I have a mobo P5K-e wifi

when I was 2giga ram was fine
now that I put the new ram OCZ Reaper PC8500 8GB DDR2 1066 is no longer
evil black screen comes on and turns off
What can I do??

Rebuild your DSDT. You need to after ram changes.

flicka · #**362** 11-15-2010, 07:04 PM

Upate successfully to 10.6.5. I've only to repatch ionetworkingfamily.kext

fishcow · #**363** 11-18-2010, 03:34 AM

Long time no post.
I have a dilemma that I'm hoping one of you fine people could help me out with.

I have been successful in applying enough dsdt patches posted here to enable the use of native PowerManagement and therefore Shutdown, Restart and Sleep all working in dsdt.
I would like next to try and take control of the stupid-high CPU temps I'm getting running Apple's PowerManagement.

I have found a lot of conflicting and confusing information regarding editing dsdt and entering P State tables etc. I also tried using Q6600 patches available in many dsdt editing software in combination with voodooMonitor - but frankly I didn't see any changes.

I saw mention of Chameleon 2 RC5 (218) which has P and C States injection, but it's been a long time since I have had to install a new boot loader (still using RC3 here) and a bit sketchy on how best to go about trying this out.

I have since reverted to a dsdt that doesn't have any _CST methods inserted by any patching.
I have confirmed that AppleLPC is loading.

Just not sure if I can jump from RC3 to RC5 by just swapping out the boot file and editing the com.apple.Boot.plist to add in the new flags for p and c states injection.

I think that about covers it.
Any help appreciated.

BTW, because I'm still on Chameleon RC3 - I still have PlatformUUID and OSXRestart in my E/E .
I assume I should get rid of those if I can install the new bootloader?

spanakorizo · #**364** 01-15-2011, 09:18 AM

hello everyone, it's been a long time since i looked around, so what is the current status of onboard sound and snow leopard?
cause for 2 years i had an external card (m-audio/modified crappy drivers) and now i want to get rid of it and go back to the onboard.
Last time i used the onboard sound and ad1998b.kext the status was:frontpanel no work (i think..i am not really sure) and by digital connection you couldnt mute or change the volume slider, and also sometimes crappy noise sound at boot.
Still the same or somebody fixed 100% ad1998B?

in case you would like to try my dsdt methods, download my .aml here:
http://www.insanelymac.com/forum/lof...hp/t88827.html
mobo is p5k-premium wifi

spanakorizo · #**365** 01-15-2011, 10:01 AM

the dsdt edits came from lancelotu at page3 were allready at my old dsdt so i still use dsdt fix+ad1998b.kext,
i rebuild my extension.mkext,reboot with onboard sound and this is what i get:
Untitled.jpg
the most important that i remember also made me find another card is no 5.1 in the audio MIDI setup, only stereo
and i confirm that the volume slider doesnt move. (in Digital Out)
how about you?
still is like this or something changed?

alhazred23 · #**366** 01-23-2011, 12:56 AM

Hi all

This has been an excellent thread and I have learned much.

I have an ASUS Commando board that isn't very well supported in the OSX86 world and have been building up my DSDT from scratch. I've got it almost perfect now, but am still struggling with sound.

I have used all methods mentioned in this thread (and many others!) but I can't get it to work. I've got the speaker icon on the desktop and system profiler recognises I have audio (thanks to the DSDT edits and the AD1988b_fix.kext) However, there's no sound coming out. I've got my speakers plugged in the back to the Green plug. I think the Commando may use a different pin config and I was wondering if anyone here knew how to create your own pin config. I tried some alternative ones, but I'd like to make my own. Where do I start?

Thanks

pipes · #**367** 01-23-2011, 07:30 PM

Quote:

Originally Posted by omargoa

here is my bios setup : (bios version 0903) i have P5E but i think the P5E and the P5k are the same bios setting

-configure sata as [AHCI]

-CPU configuration :
C1 support [Disabled]
CPU TM Function [Enabled]
Vanderpool technology [Enabled]
Execute Disable Bit [Enabled]
Max CPUID Value limit [Disabled]
Intel Speedstep [Enabled]

-Suspend Mode : [Auto]
-Repost Video on S3 Resume [Disabled]
-ACPI 2.0 Support [Enabled]
-ACPI APIC Support [Enabled]
-Front Panel audio : [HD audio]
-J-Micron Pata/Sata Controler : [Disabled]
-VIA 1394 [Enabled]

kext instaled in extra :
-AD1988b.Fix.Kext --- dsmos.Kext --- OpenHalt Restart.Kext ---IOAHCIBlockstorageInjector.Kext

in com.apple.boot.plist just add my graphic device-properties and set Graphics mode to my resolution (1680x1050x32)

in smbios.plist i add the same number of SMUUID for my hardrive, set the SMmemType at 19 (for ddr2) and add SMexternalclock : 267 and SMmaximalclock 2400 for the correct information of my (CPU q6600 2.4)

Now for the method on this page by "ZHELL"
http://www.insanelymac.com/forum/ind...owtopic=168014

first open IORegistryExplorer and type USB
you find a list of your USB like USB0 USB1 USB2 EUSB USBE ...
clic on one of them and note to number in the "compatible" Property like pci8086,2934 ... (see my IOregistry attachment photo this is after modification 2934--> to 3a34)
Attachment 472
every USB has a specific number
now as i understand the tips is to change the first couple of number of every port to 3a to have as result 3a34 (replace 29 by 3a ), to do this you need to add in every usb devices in dsdt line like this in the end :

Code:

                Method (_DSM, 4, NotSerialized)
                {
                    Store (Package (0x02)
                        {
                            "device-id", 
                            Buffer (0x04)
                            {
                                0x34, 0x3A, 0x00, 0x00
                            }
                        }, Local0)
                    DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
                    Return (Local0)
                }

and put the number you find in ioregistrydevice USB in :
0x34, 0x3A, 0x00, 0x00 (you add first the second couple of number 34 after you add the changed number 3a in all USB

you should have something like this :

Code:

 Device (USB0)
            {
                Name (_ADR, 0x001D0000)
[........]
                Method (_DSM, 4, NotSerialized)
                {
                    Store (Package (0x02)
                        {
                            "device-id", 
                            Buffer (0x04)
                            {
                                0x34, 0x3A, 0x00, 0x00
                            }
                        }, Local0)
                    DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
                    Return (Local0)
                }
            }
 
            Device (USB1)
            {
                Name (_ADR, 0x001D0001)
[........]
 
                Method (_DSM, 4, NotSerialized)
                {
                    Store (Package (0x02)
                        {
                            "device-id", 
                            Buffer (0x04)
                            {
                                0x35, 0x3A, 0x00, 0x00
                            }
                        }, Local0)
                    DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
                    Return (Local0)
                }
            }
 
            Device (USB2)
[.............]
            {

after that compile your dsdt (for me i have no error in compiling)

reboot and verify in your ioregistry in the appleUSBUHCI of you usb the property "Errata" : if it set to 0 your usb device are not recognized you should have a number like 0x20e800
see the second attachement "errata"
Attachment 473

if you do the same method for you sata device (type "sat" in IOregistry)
Attachment 474
your sata are recognized to ICH10 in system profile and no need for AHCIportinjector

Code:

  Device (SATA)
            {
                Name (_ADR, 0x001F0002)
[...........]
                }
 
                Method (_DSM, 4, NotSerialized)
                {
                    Store (Package (0x02)
                        {
                            "device-id", 
                            Buffer (0x04)
                            {
                                0x22, 0x3A, 0x00, 0x00
                            }
                        }, Local0)
                    DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
                    Return (Local0)
                }
            }

important : don't set your smbios.plist to MacPro 4,1, set it as MacPro 3,1

now the sleep/wake up work good but i need to re plug only the keyboard after every sleep other usb devices are fine.

to lancelotu :
can you please give me the "PinConfiguration" of your audio patch in dsdt ? because for me only the front micro work... Thanks

(sorry for my very bad english) (if someone need a better explain see the original ZHELL tutorial) (or talk to me in french

)

Hello, I have a problem with boot with ich10r + X58, some time starts and a lot of others it returns me this message: Serial Atapi: initial device configuration did not complete successfully (failedcommandinfo=0X2).
Can you help me? please
This is my dsdt.dsl: http://www.megaupload.com/?d=O4BAA3XC
My mainboard is a rampage 2 extreme, core i7 920, 3 HDD's and HD 4870X2
Thanks in advanced

bingaling · #**368** 02-11-2011, 07:46 PM

hi all, first i'd like to say what a great post this is, i've a smooth hack pro thanks to it!
the only peculiarity is that all internal disks apart from the boot drive appear external... any know how to fix this? previously this wasn't the case, then i had to restore from time machine and this happened...