Yes I know Freshcuts. But I said that only for you to add your dev id in this kext and test if it works.

Hmm...Freshcuts what is your bios version (number)? And what devices you have enabled in onboard devices section?

my bios is the latest 1303 audio:Realtek ACL850 codec
the devices i have enabled are: nvraid,audio,nvidia network. EDIT:check pic

@Zephyroth you are right i didnt understand what you said before.
So i have to go to windows device manager etc to get the dev id?
Or is it possible to get it from some one who has the same audio chip?

thanks

EDIT: i found this"ac97: codec id 0x414c4790 (Avance Logic ALC850 rev 0) " here: "http://archives.neohapsis.com/archives/openbsd/2006-08/1515.html"
Can it be used in my case?

Hey Zephyroth,
Maybe you could help me,
I Installed this using, 9.2 kernel, Nforce 3,4,5,,nvidia ktexts, nvida 512mb, forcedeath, and guid
it installing perfectly, i eve have it booting on its own with out a dvd, but after it gets past that initial blue screen before the logon screen or setup screen i get a black screen with only a mouse pointer that moves, but its stuck there? any reason? thanks for your help

ASUS M2N SLI Deluxe
AMD X2 4200
Nvidia 7900 GTO
WD 150GB SATA
2GB Corsair

I've got a problem with my acer lap top installing leo 10.5.2 it doesn't see my sata hdd. i think because dev_id and ven_id of my motherboard aren't listed in info.plist and i cannot inject my edited kext into extensions.mkext because it's nessesary to have installed os x can anybody inject kext with my ids to extensions.mkext and send it to me. Laptop aser aspire 5520 chipset mcp51 ven_10de dev_0543. kext with edited info.plist attached.

Thanks for the great release! Everything is up and running.

ASUS M2A-VM
AMD X2 4000
Nvidia 8600 GT
Broadcom Wireless
Realtek ALC883 sound
Seagate 320gb SATA

<3

Your laptop is an acer aspire 5520-5679? I have that model and i cant install leopard too :S, may if someone can build a extensions.mkext there is a chance for us to install leopard :)
can somebody help us?
:)

**Edit**
My dev id is 0x056010de so i add it in <key>NForce SATA Controller</key> section of the kext
can somebody build me a new extensions.mkext with this nforceata.kext? i cant install leopard/tiger so i cant
follow the "how to's" :S
waiting that somebody could help me :)
cya guys!

Time ago I downloaded Zephyroth's 10.5.1 for AMD, and it didn't work, I didn't even see the installer.... I still have hope that I will have mac on my PC.... do you think Zephyroth's 10.5.2 will work on my computer?

My laptop is a Toshiba Satellite A215-S4767,
it has 2 gb ram,
AMD turion 64x2 Dual Core Mobile Technology,
250 gb HDD + 80 gb HDD (external),
ATI Radeon X1200,
54g Atherols Wi-Fi (802.11b/g); 10/100 Ethernet; 4 USB, 1 FireWire, 1 VGA,
1 S-Video, 1 ExpressCard 34/54. 5-in-1 memory card reader,
Realtek High Definition Audio ALC268
SSE 3

eard and opacity, try this guy. Added both of your vendor ID's in AppleNforceATA.

http://rapidshare.com/files/93326293...mkext.zip.html

I was able to finally boot into leopard by booting thru "-x" safe mode, but only that way, how do I configure it to boot with out having to use safe mode

Ok, this is how far I've got.

I have an Olidata Stainer 3000 Notebook with:
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-50
RAM: 2GB
Graphics: Radeon Xpress 1100
Chipset: ATI South Bridge 400
HDD: WDC WD1200BEVS-0 (SATA)

Installed using MBR-Partition Scheme and MBR-Fix + 9.20 Kernel (shows just 1 kernel in system profiler...). Got gray screen of death at first boot. Then on second boot using "-v" parm and it didn't crash. Got native resolution (1280x800) working using Callisto driver beta 3 (but no QE/CI, of course). My HAMA Wireless USB works using RT73 drivers.

In the logs there are many "_CFGetHostUUIDString: unable to determine UUID for host. Error: 35" messages and the boot progess is quite long, because at the end of loading all drivers it just seems to sleep and then it shows "IOKitWaitQuiet() timed out" warning.

And although sound was working with Kalyway 10.4.10 AMD, it doesn't work with this Leopard release. Still trying to locate the right kernel extension for that IntelHDA driver.

lshw output on linux for that soundcard show's this:
*-multimedia
description: Audio device
product: SB450 HDA Audio
vendor: ATI Technologies Inc
physical id: 14.2
bus info: pci@0000:00:14.2
version: 01
width: 64 bits
clock: 33MHz
capabilities: pm msi bus_master cap_list
configuration: driver=HDA Intel latency=64 module=snd_hda_intel

Anyway thanks zephyroth for the great work. Including those VIAATA/ATI SB kexts on the DVD made it easy to install this on my AMD/ATI-Notebook.

Zephiroth, I just have a word for you: WOW!

Everything works smoothly, including Toast Titanium 7.2
I've tried just one game, Prey, and it has no audio (I've used the AC97 driver) but I can live with it.

Thank you, and keep up the wonderful work.

My system:
AMD 4400+ dual core
ASUS A8N SLI
2Gb RAM
Nvidia 8800 GTS 320Mb

I investigated more on one of the issues i reported in my previuosly msg, I don't know why but System Profiler reports only one core (my CPU is an AMD X2 4200+) but Activity Monitor shows two cores working so I think it's only a bug in the program that try to identify the CPU.

I will investigate more on the GPU issue now, because I noticed that it's not related to NVinject.kext, if I copy only that one from my previuosly installation I still have a lot of graphics artifacts and no CI/QE, if I copy all the old kext related to graphics (Geforce.kext and all the others) everything works fine exept the graphic memory size reported by System profiler (771MB and not 512MB) ...

Great work Zephyroth with this release!!

hey federal

Your mobo chipset sb600, is native installed on the sata hdd? i'm to interest! really?

Hola, me descargue la imagen de Zephyroth Leopard 10.5.2 y no me reconoce el disco duro de mi portatil, cuando quise cargar los kexts, no se pudo porque no existe la carpeta Extensions en /System/Library/Extensions no such file or directory, help me please.

Could you speak only English ?

It's better so everyone here can understand what's your problem !

Fractal talks about the kext directory , he don't found it . the new release don't recognize the disk in his laptop.

Zephyroth:
fractal is saying that he downloaded your 10.5.2 and thait doesnt recognize his external hard drive, that it doesn't exist the folder Extension in /System/Library/Extensions.

Zephyroth, do you think 10.5.2 for AMD will work on my computer:

My laptop is a Toshiba Satellite A215-S4767,
it has 2 gb ram,
AMD turion 64x2 Dual Core Mobile Technology,
250 gb HDD + 80 gb HDD (external),
ATI Radeon X1200,
54g Atherols Wi-Fi (802.11b/g); 10/100 Ethernet; 4 USB, 1 FireWire, 1 VGA,
1 S-Video, 1 ExpressCard 34/54. 5-in-1 memory card reader,
Realtek High Definition Audio ALC268
SSE 3

Thanks!

hmm strange but after install I haven't got EFI (yes I checked boot mbr with efi). I will try to install it manually. This is last hope for my x1600 mobility.

unfortunately here is smth wrong again... nforce was recognized but installer didn't start.. -v shows mdns responder realtime bla bla bla
this machine time bla bla bla setting corrector -bla bla bla
and then cd stops aand installation don't run. is there any solution of this problem and what does it mean?

Try disabling your LAN port, and disconnecting the cable.

Hi,

finaly I have gotten myself a copy of the new 10.5.2 Zephyroth. Although I could not boot it to the installer (couldn't install it yet). When I put the DVD in it says to start up from the dvd press any key, or press f8 for start up options. Shouldn't this say to install MAC OS X not start up from DVD?

So I press any key and it goes into the nice apple bootscreen, but after 10-20 seconds it displays a black X in a circle in the center of the screen. So no luck, i tried booting with -x (safemode) but I get an error message:
EBIOS read error: Device timeout
Block 7110492 Sectors 64

Then after the error message, it does the same thing (goes into the apple bootscreen, but after 10-20 seconds it displays a black X in a circle in the center of the screen). So no luck. I am trying to install this on an IDE hard drive.

I was able to install Zephyroth 10.5.1 just fine although no sound, so I shouldn't have any problems (or so I thought). Do I have to install Leopord (10.5.1) first? I am just trying this on a formatted secondary hard drive.

Because i am still new to this I can't tell you all that much about my machine (specifications), but I can give you my pc's HP support webpage:

http://h10025.www1.hp.com/ewfrf/wc/product?product=3440614&lc=en&cc=us&dlc=en&submit. y=7&submit.x=7&lang=en&cc=us

Please Help :)
Thanks and great job Zephyroth for finally releasing this (even though I have problems, I am sure it'll be great).
Delian

Well, i think i advanced a little more but still no result :(
I added the extensions.mkext with transmac and all, burned again and put the dvd inside the laptop
i set active the partition where i wanna install leopard mmmm then i restart the laptop and boot with -f -v flags
darwin loading bla bla loading extension.mkext from system/library/ and then i read that the AppleNforceATA found 1 device, in that moment i was happy :) mmm i also watch an error when the dvd try to load the driver of my wifi card mmm
then the setup stop in mdns responder but i let the installation run and then appear the blue screen and the mouse cursor, i select the language and all but when i open disk utility it doesn't show my hd yet :(
some help?
tomorrow i will post an image (in mexico the time is 11:50 pm right now and i wanna sleep :P)
tnx for read me and waiting for some help :)
cya!

I cannot disable ethernet because there is no such option in bios :( i tried not to insert ethernet cable but result is the same.may be you can suggest another way to solve this problem whith mdns?

WOW thx thx thx for the great release
works on my machine, posting this with safari, but i have 2 problems:
onboard network card doesn't work
onboard soundcard doesn't work (is there a way to use my 2.nd soundcard: Creative Sound Blaster X-Fi Xtreme Gamer ???)

Athlon64 X2 6000+ 3Ghz
ASUS M2N32-SLI Premium Vista Edition (nForce 590 SLI)
4096 MB OCZ (PC2-6400)
GeForce 8800 GTS 512 (G92)
WD 5000AAKS-0 (500 GB) VISTA
SAMSUNG SP1614C (160 GB) OSX

for more details:
http://www.sysprofile.de/id34824

thx and waiting 4 help

I cant say it in english... LOCO SOS UNA MASA!!! HAY QUE HACERTE UN MONUMENTO EN EL MEDIO DE LIBERTADOR!! DE OTRO PLANETA...

Everything works PERFECTLY! Like I said, out of this world...

ASUS M2NVP-MX
AMD X2 3600
3com 905B
ASUS 7300GT
SATA 160GB

The only thing I have to install is the azalia drivers. The ones included doesnt work for me.
Full QE/CI, stable, excelent performance, its so perfect...

OUTSTANDIG!!!

Everything is working great for me.. Thank you much to all who contributed to getting this finished..

I had to do MBR + EFI, as GUID i can never get to boot, just says b0 error ( and i did try using fdisk, as im familiar with this error - no luck).
Thats okay though- GUID has never worked before anyways

Athlon 64 x2 3800+
Abit KN8 Nforce4 Ultra
GeForce 7900 GT/KO
AC97 onboard
Linksys PCI wifi (bcm 4320)
2gb Corsair DDR 400 (shows as ddr 400 in "about this mac" should be 440 though, im overclocked)
Lite-On Lightscribe Burner (works!)

I tried everything and still no sound on my alc850.

I did the wiki audio guide.
I checked my dev id and it is included in the ac97 kext.
i tried installing azalia.
i tried different kexts.
I dont know what else i can do.i am a bit desperate for sound.
If anyone could help i would really appreciate it!
thank you

Posts: 1
Joined: 20-October 06
Member No.: 60,842




Hi Guys,

I also posted this to InsanelyMac forums.

Here is my problem:
I'm trying to install on a Shuttle SN85V30
Chipset: Nvidia nForce3 250 Single Chip for AMD AthlonTM 64 CPU
CPU: Sempron 3100+ Palermo (has SSE3)
2Go RAM (DDR 333MHz)
HD: 200Go Western Digital SATA
Video Card: eVGA NVidia GeForce 6200 LE

I start booting with the DVD, type F8 and -v -x to run in verbose + safe mode and i get a kernel panic exactly like this one:

http://forum.insanelymac.com/index.php?s=&...st&p=630228

Any idea what is going on with my configuration or with the boot CD? Any chance I can get it to work without changing the Video card and/or switching to IDE hard drive?


Thanks.

It's probably a little more useful if you list the actual onboard sound chip/codec - same with the onboard networking adapter. Or provide a link... Here's what I generally do:

http://www.newegg.com/Product/Product.aspx?Item=N82E16813131163
(newegg.com has an excellent selection and gives all kinds of info - especially on MB products.)

They show your onboard sound is: ADI AD1988b

I think I've seen references to that on insanelymac.com & someone here probably has some info about it...
They don't list the LAN chip(s) (I think your MB has 2...) but they DO have a link to the manufacturer:

http://support.asus.com/download/download.aspx?SLanguage=en-us&model=M2N32-SLI%20Premium%20Vista%20Edition

where, if you still can't find the exact specs, you can usually download the Users Manual...

In the English version - on page 2-4 - it shows your networking adapters as:

2x Marvell 88E1116 gigabit LAN adapter

Again, someone here ( or at insanelymac ) will probably have more information on the Marvell chipsets.

(that wasn't too hard for me to find - still, it would have been much simpler if you had gotten that info out of your users manual in the first place. try to make it easy for people to help ;-) ... )

I don't get it. Our ALC850 was supported natively by 10.5.1 - I don't know why it wouldn't be in 10.5.2...

( that's the sound codec used on my son's MB on our very first Zephyroth install. I haven't tried 10.5.2 on his machine - it's working perfectly for him & I really don't want to mess with it... )

So, I am having an issue w/ the 10.5.2 cd, where it either boots to the apple logo and gives me a "you must restart" error message, or it just reboots, or it gives me a kernel panic for 9.0.0.

I had the -x safe boot problem w/ the 10.5.1 CD, but it installed fine.

Is there a way to set the kernel to boot with?

HOW THE HELL DO I DOWNLOAD THIS ISO NOW.. ONE SAYS TORRENTS , OTHER SAYS USENET.. I MEAN THEPIRATEBAY TAKES AGES...PLEASE SOMEONE POINT ME WHERE TO DOWNLOAD FROM AS FAST AS POSSIBLE. THANKS

man, take it easy.
Try usenet. I get it from there in only five hours.
http://forum.insanelymac.com/index.php?showtopic=88079

ive pressed the search button too many times and i dont know what im going to do now because its says that the limit is over or something pelz.

Zephyroth, great release, thanks!

I have a ASUS M2N-E mobo. Chipset is NForce 570 Ultra MCP. Audio is Realtek ALC850

I successfuly installed AMD 10.5.2 on a SATA disk but with some problems.

1) Audio doesn't work. No built-in audio it says.
2) Network doesn't work. It says the cable is not connected. I selected forcedeth during installation.

Other than these it looks okay.

Any suggestions? Thanks

HOW DO U USE NEWSLEACHER?

Seriously dude... Do yourself a favor (& us too) and just ride the torrent. Go outside and play for a day or two...

( oh, do you remember how to UNDO the "Caps Lock" on your keyboard? )

Excuse me , but its not me thats making it so complicated and im sure that there are hundreds of ways out there that you could have used to make a it a little bit easier. Im not one of those people that are going to download for 1 week if there are easier ways.

Skyper-

If you are so in a hurry, go to your local Apple Store and buy a Mac... You'll get it immediately and won't have to wait until that stupid torrent download is complete...

Alright anyway i gave up so whats the point really.No point. Have a great day.

Fastest way is to subscribe EasyNews for 9 bucks a month and download the files as fast as your bandwidth can get. In my case I was able to download in 10 minutes. If you download fast, then I suggest you go with easynews or such sites.

Please excuse me guys, if this was already mentioned here, but I can't read 30 pages at once ;-)
I found following "bugs":

- Some language files are missing for new features like list stacks. I've got the german languagepacks installed, but on lists it's following shown:

OPTIONS
OPEN_IN_FINDER

(looks a little bit like variable-placeholders)

The second thing I was wondering about is, that in System Config "Time Machine" you can't hide the time machine icon in the menubar. Mh.. !? For non-time machine users not very cool ... ;-)

Zeph, you made a great release, by the way, thank you!

-crawle

@timeflux
If he hasn't found and read the MULTITUDE of posts on how to get 10.5.2 via USENET already... ALL the information is already here man...

So you are telling me that on 10.5.1 the sound works on alc 850?

Absolutely.
Look for the "Hardware" thread. All the hardware specs for that computer are listed... That was my "1st GarageBand 10.5.1..." - first successful zephy install. My son uses that computer with Garage Band daily - ever since I built it.

@cgsheen
What ever.

True? Or not?

Rather not i'm afraid. Ive already checked before i posted thank you very much. But my problem was that i clicked the search button too many times so it popped up with an limit error. So i was asking very kindly if there was another program because this one wont work because my limit runned out. Can you understand now? Or do you want me to explain it to you in kinda more simple english?

cool thanks.I will try installing 10.5.1, because sound is imperative for me!