InfiniteMac OSx86
Page 13 of 32 « First < 31112 13 141523 > Last »
Show 50 post(s) from this thread on one page

InfiniteMac OSx86 (http://infinitemac.com/forum.php)
-   10.X (http://infinitemac.com/forumdisplay.php?f=36)
-   -   iPC OSx86 Leopard 10.5.6 Intel AMD SSE2 SSE3 (http://infinitemac.com/showthread.php?t=1792)

pinchio 01-10-2009 09:11 PM
Hey All,

I got 10.5.6 up and running on my Gateway. The issue now is that I only selected the bare essentials to get this far after several failed attempts.

This is my first "tosh" so I'm not sure how I would install drivers for the remaining bits. So could someone point me in the right direction.

The pieces that aren't detected are...

ATI Radeon X1800
Linksys Wifi card (PCI) WMP54G

A little help would be appreciated. And please don't assume I know any special Mac lingo or parlance.

Thanks

zyph3r 01-10-2009 10:24 PM
Nice distro with a lots of options.. But maybe its a little too much confusing for the begginers IMO

dotzev 01-10-2009 10:32 PM
Quote:
Originally Posted by nfoav8or (Post 20565)
install the HDAEnabler kext file so the system shows that it works... then make sure you correct permissions and have an updated Extensions.mkext file or just boot with -f to ensure it is using the kext.
Where is this HDA Enabler and how do I correct the permissions?...
Do I do this on the installed system or do I do a clean install???

Forgot to mention that I'm a noob :D

zyph3r 01-10-2009 10:37 PM
On installed system, google for HDAEnabler.kext and install the kext using Kext Helper (it will fix perfimissions for you)

Doerak 01-10-2009 11:52 PM
He dudes,

Something nice happened. I installed Zepthyroth Leopard 10.5.2. Then with AMD software update i did update to 10.5.6.

After reboot -f. And voila. No kernel update or something like that first. Still using Darwin 9.2.0.

My system:

AMD 3800
Nvidia 6600 LE
Asus motherboard a8n-e

cmdshft 01-11-2009 12:06 AM
Quote:
Originally Posted by Doerak (Post 20819)
He dudes,

Something nice happened. I installed Zepthyroth Leopard 10.5.2. Then with AMD software update i did update to 10.5.6.

After reboot -f. And voila. No kernel update or something like that first. Still using Darwin 9.2.0.

My system:

AMD 3800
Nvidia 6600 LE
Asus motherboard a8n-e
Get out of the stoneage.

Doerak 01-11-2009 12:07 AM
Mja sorry, little bit to enthousiastic.

dotzev 01-11-2009 12:18 AM
Quote:
Originally Posted by zyph3r (Post 20814)
On installed system, google for HDAEnabler.kext and install the kext using Kext Helper (it will fix perfimissions for you)
Well,tnx for trying but I installed it and it does not work,I still get
"No output devices found"...

I'd really appreciate any other ideas :P

terrorgen 01-12-2009 10:35 AM
Thanks Hara Taiki, my hackintosh is running in full glory with Voodoo 9.5 kernel...




...EXCEPT...

- System Information shows that I have 1 of 2 cores turned on. I would like both cores working.

- None of my two optical drives are detected, which are IDEs
(I have an old IOATAFamily.kext with me which I used to patch older versions of Leopard, not sure if it is going to work either, but is there a newer way to do it?)

- VMware Fusion is still having KP while starting VMs, even when I feed the boot prompt with kernel=mach_kernel, heard it is because of the RAMs? I have 4G.

- iPhone is not mounting properly. It shows in iTunes, syncs for a second and then disappears. However it still shows in SysInfo.

gnalc 01-13-2009 04:43 PM
hi! i tried installing ipc public beta (patched) on a gigagbyte p35-ds3r, but am having difficulties making the ethernet adapter work.

it installed without any problems at first, them i noticed the network card doest detect the network, and some other little things.

will try to re-install again with different configurations and see what happens :)