InfiniteMac OSx86
Page 14 of 16 « First < 41213 14 1516 >
Show 50 post(s) from this thread on one page

InfiniteMac OSx86 (http://infinitemac.com/forum.php)
-   10.X (http://infinitemac.com/forumdisplay.php?f=36)
-   -   UHCI/EHCI Built in with dsdt fix (http://infinitemac.com/showthread.php?t=3849)

wwbsox 10-06-2009 04:49 PM
@EnzoFX

I believe that is correct. I have seen other boards without the D3 address. The actual addresses that get modified should be D0,D1,D2,A0,A1 and A2.

Also, The USB1.1 hub should work for anybody that "MUST" wake from aluminum keyboard. But I dont have an old hub to test out.

xwin78 10-07-2009 06:23 AM
@ wwbsox

thanks for all the help w/ my DSDT file--I just added my GFX info and all is well except I can not sleep, my system just powers down and when I strike the keyboard it boots back up (cold). I have the same setup as your sig---what is your BIOS rev and what are your BIOS settings (specifically your power related BIOS settings)?

Thanks

kDawg 10-07-2009 02:31 PM
Quote:
Originally Posted by wwbsox (Post 36824)
@EnzoFX

I believe that is correct. I have seen other boards without the D3 address. The actual addresses that get modified should be D0,D1,D2,A0,A1 and A2.

Also, The USB1.1 hub should work for anybody that "MUST" wake from aluminum keyboard. But I dont have an old hub to test out.
I actually think this is a mistake on Gigabyte's behalf. The D3 device is a mystery. I have a GA-EP45-UD3P and it doesn't reference the D3 address. I also found an error in the USB device section in the DSDT for my other MOBO a GA-EP35-DS4.

Some companys do a better job generating their DSDT than others. I do happen to think Gigabyte does an OK job.

sylvester328 10-09-2009 05:50 AM
Quote:
Originally Posted by kDawg (Post 36874)
I actually think this is a mistake on Gigabyte's behalf. The D3 device is a mystery. I have a GA-EP45-UD3P and it doesn't reference the D3 address. I also found an error in the USB device section in the DSDT for my other MOBO a GA-EP35-DS4.

Some companys do a better job generating their DSDT than others. I do happen to think Gigabyte does an OK job.
Just upgrading the BIOS for my EP45-DS3R. In the process of DSDT patching, I noticed that the new BIOS (F11e) no longer has this D3 device. They also fixed a couple of bugs which caused compilation warnings as well.

I really hope someone find a DSDT hack soon to enable the wake from sleep using USB2 keyboard.

kDawg 10-09-2009 10:37 AM
Quote:
Originally Posted by sylvester328 (Post 36984)
Just upgrading the BIOS for my EP45-DS3R. In the process of DSDT patching, I noticed that the new BIOS (F11e) no longer has this D3 device. They also fixed a couple of bugs which caused compilation warnings as well.

I really hope someone find a DSDT hack soon to enable the wake from sleep using USB2 keyboard.

Have you posted your DSDT somewhere? If not attach it here so I can take a quick look.

Ianxxx 10-09-2009 11:20 AM
Quote:
Originally Posted by BugsB (Post 36612)

The dsdt.dsl for my Toshiba Satellite P100 is attached.

Bugs
I don't think it is?

wwbsox 10-11-2009 01:56 AM
Master Chief over at insanelymac has a dsdt patch that on the p5k boards enables wake from usb2 keyboard, including apple keyboard. I have tried for a few days to get this to work on a gigabyte board to no avail. Still trying though.

If you have a p5k, I suggest you look up him up. He has sooooo many dsdt patches for that board it will make your head spin. Seriously.

sk1nhd33t 10-11-2009 04:50 AM
Quote:
Originally Posted by wwbsox (Post 37109)
Master Chief over at insanelymac has a dsdt patch that on the p5k boards enables wake from usb2 keyboard, including apple keyboard. I have tried for a few days to get this to work on a gigabyte board to no avail. Still trying though.

If you have a p5k, I suggest you look up him up. He has sooooo many dsdt patches for that board it will make your head spin. Seriously.
i wanna take a look at this if you have a direct DL link and try? im also having issues waking from sleep using my aluminum keyboard... or maybe a dsdt.dsl will do if you dont mind :rolleyes:

wwbsox 10-12-2009 09:07 PM
@sk1nhd33t

http://www.insanelymac.com/forum/ind...owtopic=188920

The third post from master chief has all his DSDT's.

Again... great if you have a P5K Pro. Still trying to get wake from aluminum keyboard working on the Gigabyte tho.

pandar 10-19-2009 11:34 PM
Hi

I have an installation of 10.6.1 on the ds3p and would like to borrow your solution. I have an 8600gt however. How would I deal with that? I'm using Chameleon RC3 and Netkas's latest boot file. If you can clue me in a bit, I'd appreciate it.

Thanks

Pandar