|
I only have 1 Hd
ya! I do, I have 1.48 G EISA partition and 98.75 Gb NTFS Partition Vista 12Gb were my Leopard is installed |
hi!
is it possible to install mac os (tiger or leo) to MSI vr330? AMD mobile (Sempron 3500 1,8 gh, supports sse3), nVidia c51, NVIDIA GeForce GO 6100, Atheros 5006/7 controller. what iso file i must downloaad? what start with? thx, Max |
Hello Community!
I have downloaded the Leopard 10.5.2 AMD EFI Rev.2 with the guide of WinLinMac01 over newsgroups. I burned it on DVD [4x speed]. I booted from it and came into Leopard menu. I chose german as default languge. I used the Disk Utility and made a partition for Leopard(called "leopard") and a second for Windows (called "DATA"). Iused Mac OS Extended (Journaled) as format and I selected Master Boot record in the options.The DATA partition was formated with FAT. Then i went back to the Installer and chose the leopard Partition as destination to install leopard. Then i continued and customized the Installation (graphic driver for hd 3870; AC97 sound driver ; ToH kernel SSE3 9.2.0; additional fonts; and the sb drivers. I started the installation and the DVD has been checked. The DVD check hasn´t had any errors. The installation went to the beginning of the the second girder of the X. It said that are about 5 minutes left. Then it said that i should restart my computer. WHY? after the restart he only wanted to boot from the disk again! I tried this with three different DVDs about 6 times. My hardware: MSI k9a platinium (rd580x+sb600) AMD Athlon x2 6000+ 3ghz AM2 Samsung 250GB SATA2(in 2nd plug-in) Samsung DVD SATA2(in 1st plug-in) 2x 512MB extrememory 2x 512MB GEiL all DDR2 800 Sapphire HD3870 PS. one time the installation went until the last minute and had the a unknown error I hope you can help me! THX |
did you check a boot loader???
|
Hi All
I need help installing Zepyroth's OS X Leopard 10.5.2 on my PC, I need an Install guide to help me got threw the steps to get it installed on my PC, Ive download the Zepyroth's .iso file and burned it to DVD. What do i do now to get its fully working: My PC Spec is: Shuttle SN25P AMD Opteron 170 Dual Core 2GB RAM 250GB SATA Western Digital HD XFX 7600 GT XXX 256MB Graphics Card 18x Sony DVD±RW |
boot to the dvd
and go through the process of installing just like any os but after you pick your hard drive to install it on click the customize button to pick the packages you want to install |
<UL>
<LI>Insert the DVD into your machine. <LI>Boot into the bios and select the first boot device as your optical drive to allow the system to boot from the DVD. <LI>If all goes well the Mac OS X installer will appear. Select your language and wait for the next prompt. <LI>At the top of the screen you will see a menu, go to 'Utilities' and select 'Disk Utility'. <LI>Once in Disk Utility select the drive you wish to install OS X onto - this is visually represented in the left hand pane. <LI>Once selected look for 'Partition' and 'Options', use either 'GUID' for EFI or 'MBR' for Master Boot Record, then press 'OK' <LI>Name your new Volume as Leopard and format it using Mac OS Extended (Journaled). <LI>Quit Disk Utility and wait for the Installer to reappear. Follow the prompts then select the drive you have just initialized. <LI>Choose the 'Customize' option and select/deselect the packages you wish to install. Ensure that you select the appropriate boot loader and that it corresponds with the settings you chose earlier in the partitioner. <LI>Once you're happy with that press 'OK'. <LI>Depending on your system speed the install can take anywhere between 30 mins to an hour, so go have a cup of tea or coffee... <LI>Once installed the system will automatically reboot and take you into the welcome screen and user account setup. </UL> After all that you will most likely have small things that may or may not work correctly, so you'll need to search and dig around for information. Good luck. |
Hi all i've tried installing Zepyroth's OS X Leopard 10.5.2 on my PC followed the steps above but just can't install it i tried installing in without any thing checked and it reboots then doesn't go past were its looking for the CD-ROM at first then Hard Disk Second just stops and blinks at me, I've installed with the GUID format and boot loader the same thing happens and ive installed with the windows format and bootloader and that goes to a point near the end of installing and stops but wen reboot without the dvd i can load into the first part on Leopard then a little symbol comes up over the apple like a no smoking sign without the cig like no entry. Any Ideas???
|
I've got the bootloader working now but when the computer restarts it comes up to the startup options i press enter and type in -v it starts up then in the process it stops and tells me that its "still waiting for device" could anyone give me any ideas that i could get round this.
|
Quote:
Read this and this. |