InfiniteMac OSx86
Page 18 of 37 « First < 81617 18 192028 > Last »
Show 50 post(s) from this thread on one page

InfiniteMac OSx86 (http://infinitemac.com/forum.php)
-   Snow Leopard 10.6 (http://infinitemac.com/forumdisplay.php?f=87)
-   -   [How-To] Snow Leopard Retail (10A432) on P5K-E Wifi A/P -64 bit mode (http://infinitemac.com/showthread.php?t=3380)

Snoc 09-13-2009 06:34 PM
Quote:
Originally Posted by Kvant (Post 34644)
lancelotu, many-many thanks!!! Now my maya is working!!!
:)
Last thing for me - enable acceleration on NV Quadro 1700. But this another story.
Hi!
I think this could help you: do a google search for aquamac Quadro FX 1700 and take a look to the first link.

I hope this work for you.

Kind regards,
Snoc

adrianmak 09-14-2009 04:19 AM
I'm using the same motherboard p5k-e wifi/ap.

I installed SL and boot into desktopsuccessfully.
Then I extract attached file AppleYukon2Injector.kext.zip posted from 1st post and put under /Extra/Extensions/ and reboot

Now, SL can recgonize the network card, but it still got some issue.

It cannot get IP address from local dhcp server.
Then I manually assign an local ip but I cannot ping to other PC on the local network or access the Internet.

I ensure that the dhcpd server, router is working properly since with the same machine, booting in Windows XP or Leopard 10.5.8 is without this problem.


any help ?

lancelotu 09-14-2009 04:33 AM
Quote:
Originally Posted by adrianmak (Post 34785)
I'm using the same motherboard p5k-e wifi/ap.

I installed SL and boot into desktopsuccessfully.
Then I extract attached file AppleYukon2Injector.kext.zip posted from 1st post and put under /Extra/Extensions/ and reboot

Now, SL can recgonize the network card, but it still got some issue.

It cannot get IP address from local dhcp server.
Then I manually assign an local ip but I cannot ping to other PC on the local network or access the Internet.

I ensure that the dhcpd server, router is working properly since with the same machine, booting in Windows XP or Leopard 10.5.8 is without this problem.


any help ?
Did you tried the other method also ?

adrianmak 09-14-2009 04:48 AM
Quote:
Originally Posted by lancelotu (Post 34786)
Did you tried the other method also ?

What other method ? Edit AppleYukon2.kext's info.plist directly ?

i.e
System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleYukon2.kext/Contents/Info.plist

lancelotu 09-14-2009 04:57 AM
Quote:
Originally Posted by adrianmak (Post 34791)
What other method ? Edit AppleYukon2.kext's info.plist directly ?

i.e
System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleYukon2.kext/Contents/Info.plist
Yes that one .Did you booted with -f option ? Did you check your SystemProfiler/Extensions to see if AppleYukon.kext is loaded ? Did you tried to load and unload the kext manually ?

Did you replugged your LAN Cable?

adrianmak 09-14-2009 05:22 AM
Quote:
Originally Posted by lancelotu (Post 34795)
Yes that one .Did you booted with -f option ? Did you check your SystemProfiler/Extensions to see if AppleYukon.kext is loaded ? Did you tried to load and unload the kext manually ?

Did you replugged your LAN Cable?
I edited the Info.plist of AppleYukon.kext directly and delete the AppleYukon2Injector.kext from /Extra/Extensions and reboot with -f

Now network is working fine.:)

Question:
Why putting AppleYukon2Injector.kext under /Extra/Extensions is not fully work ? If next time resinstall SL and have to edit the Info.plist manually. And it will be more convenience by just putting the injector kext than manually editing.

Any hints ? Ah......Should I rebuild the /Extra/Extensions.mkext after adding new kext under /Extra/Extensions ? (I didn't rebuilt it actually.)

adrianmak 09-14-2009 05:53 AM
any one provided a DSDT.aml file
with all fix including audo fix and SATA ESB2 fix ?

fishcow 09-14-2009 06:02 AM
1 Attachment(s)
Quote:
Originally Posted by adrianmak (Post 34798)
any one provided a DSDT.aml file
with all fix including audo fix and SATA ESB2 fix ?
This one has all fixes you asked for - works on P5K-E Wifi/AP here.
Audio fixes by lancelotu and walterav
Extra USB ports and SATA ESB2 by Snoc

adrianmak 09-14-2009 06:53 AM
my display card not fully work.
my display card XFX Nvidia 8800GT 512MB

I used Universal OSx86 Installer 1.2 to generate EFI String.
i checked "Apply EFI String for video card" and the video card I selected is "NVIDIA GeForce 8800GT 512MB"
After installed the EFI String, I checked com.apple.Boot.plist under /Library/Preferences/SystemConfiguration, the EFI string is written in the file.

Then reboot without any flag. The screen is still just 1024x768 32MB RAM @@

http://lh5.ggpht.com/_h2T836il8i4/Sq...s/DSCF4201.JPG

anything I did wrong ?

Chrisb27 09-14-2009 07:21 AM
1 Attachment(s)
Quote:
Originally Posted by fishcow (Post 34799)
This one has all fixes you asked for - works on P5K-E Wifi/AP here.
Audio fixes by lancelotu and walterav
Extra USB ports and SATA ESB2 by Snoc
Hey guys, can I get some advice? I'm using the kexts listed below:
  • AD1988b.Fix.kext
  • AHCIPortInjector.kext
  • fakesmc.kext (2.0)
  • IOAHCIBlockStorageInjector.kext
  • IONetworkingFamily.kext
  • JMicronATA.kext
  • OpenHaltRestart.kext
I tried 2 of the DSDT's listed in this thread, after dropping the DSDT file in I remove IOAHCIBLockStorageInjector.kext and AHCIPortInjector.kext. Deleted the com.apple.kext.cahces folder. Then I boot with -f and -v. It haaangs. Below is where it hangs.

Edit: Forgot to add I'm using Chameleon RC3 as well. Thanks in advance!