InfiniteMac OSx86 - [AMD] Snow Leopard 10A432 Install

Page 18 of 25

« First

Last »

Show 50 post(s) from this thread on one page

InfiniteMac OSx86 (http://infinitemac.com/forum.php)

- Snow Leopard 10.6 (http://infinitemac.com/forumdisplay.php?f=87)

- - [AMD] Snow Leopard 10A432 Install (http://infinitemac.com/showthread.php?t=3727)

aryajuanda

10-27-2009 01:48 PM

2 Attachment(s)

Quote:

Originally Posted by roratonga (Post 38342)

i've same problem, how did you get your lpc pci id?

greetz

you can try this

roratonga

10-27-2009 06:48 PM

so where i've to enter my lpc pci id? into the array under IONameMatch (generate a new string)? - i will test it...

xshadow95

10-30-2009 01:44 AM

I'm having a problem when I boot; it freezes at the gray screen with the apple. If I do -v or -x I ultimately get a black screen with no text at all.
Could someone please help me? I'm not sure what you need to know from me.

Thanks in advance..

xshadow95

10-31-2009 06:23 PM

Now, I'm having a different problem:

here's a picture of it.

http://i35.tinypic.com/4raioy.jpg

Taisto

11-01-2009 01:10 AM

Quote:

Originally Posted by xshadow95 (Post 38640)

Now, I'm having a different problem:

here's a picture of it.

http://i35.tinypic.com/4raioy.jpg

Still waiting for root device is almost for sure a problem with Your chipset. You have to add proper kext with support for it.

TechXero

11-01-2009 01:02 PM

I have an Intel Based System, with Leo 10.5.8 on 1 drive and Snow Leo on another but snow Leo ain't booting at all ... Freezes on Apple logo, if I use -v -f -x or even cpus=1 I get a blank screen ...

My Specs :

My Rig is SSE3 capable but NOT x64bit and has 3 IDE Hard drives 1 SATA Drive and 1 IDE DVD Drive and is a full blown Intel PC with a Single Core PiV HT 2.8Ghz CPU and an Intel D865 PERL Mobo with no Network card, although I have 3 PCi Network Cards 1 Realtek 10/100, 1 Realtek Gigabit Lan and 1 D-Link 10/100 Nic. The PC also has 4GB DDR1 800Mhz RAM !

What should I do ?

jamesham

11-01-2009 03:15 PM

I did everything as the guide said and got the following message on boot up 'boot1: /boot'

Any ideas?

xshadow95

11-01-2009 05:29 PM

Quote:

Originally Posted by Taisto (Post 38658)

Still waiting for root device is almost for sure a problem with Your chipset. You have to add proper kext with support for it.

Well, my chipset is nForce 430 and I already installed the AppleNForceATA.kext, so it doesn't seem like that could be the problem.

jamesham

11-01-2009 09:37 PM

I did everything as the guide said and got the following message on boot up 'boot1: /boot'

Any ideas?
bump

DEADLY360

11-02-2009 12:08 PM

Memory not correct (System Profiler)

I just figure out that my memory isn't correctly viewed in system profiler
It should be DDR2 instead of DDR3 and 667/800 MHz instead of 1600MHz,
i think that's why some application like e.g. photoshop, illustrator
crash after opening :

Code:

Exception Type:  EXC_BAD_ACCESS (SIGBUS)

Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000

Crashed Thread:  0  Dispatch queue: com.apple.main-thread

I wonder how to fix this problem?
http://img256.imageshack.us/img256/8...91102at657.png
Edited:
I edited the info in smbios.plist but it doesn't solve the problem still have application crashing after opening
http://img22.imageshack.us/img22/91/...91103at323.png