InfiniteMac OSx86
Page 18 of 30 « First < 81617 18 192028 > Last »
Show 50 post(s) from this thread on one page

InfiniteMac OSx86 (http://infinitemac.com/forum.php)
-   Leopard 10.5 (http://infinitemac.com/forumdisplay.php?f=85)
-   -   Zephyroth Leopard AMD 10.5.2 Rev.2 Issue Discussion (http://infinitemac.com/showthread.php?t=667)

WinLinMac01 03-20-2008 08:34 PM
it works on my system, go into disk utility and see of there is any harddrive detected there. if you can see your hd there, it could be you have a different system file type. You need to spare a partition (very easy) and configure a new MBR/GUID partition.

Quote:
[cite] mkvlad:[/cite]This revision can be installed on the SATA HDD?
In my case installer sucsses launched but HDD does not displayed :(

ikko 03-21-2008 05:19 PM
I can see the GUI for welcome window of installation. However I click "continue" to install then it nothing happen. How do I fix this issue ? My PC is,

AMD 3700+ without SSE3
nforce4 go
PATA 80GB

Thank you

WinLinMac01 03-21-2008 05:22 PM
Have you tried waiting life for 1-3 minutes at least? If that doesn't work, restart the installation one last time and look for any specific errors. If there are none, most likely it can be your DVD, what speed did you burn it at? It should be at the lowest, 2X.

Quote:
[cite] ikko:[/cite]I can see the GUI for welcome window of installation. However I click "continue" to install then it nothing happen. How do I fix this issue ? My PC is,

AMD 3700+ without SSE3
nforce4 go
PATA 80GB

Thank you

MuppMan 03-21-2008 09:04 PM
I am experiencing random kernel ( need to restart your computer ) panics with this release, something I didn't have with the 10.5.1 release. I am using EFi + mbr and 9.20 kernel. Is it possible to narrow it down somehow ? Does Leopard create any error-logs ?
Help would be appreciating casue this is a bit annoying.

Btw, I have patched all Cpuids with mavericks tool but that didn't help.

Asus a8n sli
amd 64 3700+
7800gt
generic 3200 ddr

snhnic 03-21-2008 11:48 PM
allmost everything's working for me now. Tried all kinds off installations process efi mbr efi guid. sometimes I got to the complete process and sometimes (even with the same options) it stopped. But now the hakingtosh is working.

The only thing I can't get going is the smb connection with our windows servers. "connect as" does not work neither teh smb:// options. Same as a lot of people I get a message that the url is'nt right. Someone perhaps has an answer? for this problem. I hate to have to return to 10.5.1 because office 2008 does not run on that one.

ikko 03-22-2008 01:54 AM
Quote:
[cite] WinLinMac01:[/cite]Have you tried waiting life for 1-3 minutes at least? If that doesn't work, restart the installation one last time and look for any specific errors. If there are none, most likely it can be your DVD, what speed did you burn it at? It should be at the lowest, 2X.
Yes, I waited 30mins. However it's not ran. Also, my DVD burner or soft(CDBurnerXP) has 4x-18x only. Then I burned it as 4x.
And I got the error message as following before GUI.

mDNSResponder mDSN_Init Failed SandBox_init error

ikko

WinLinMac01 03-22-2008 02:16 AM
Don't use CDBurnerXP, I fell into a similar situation. Use SwiftDisc instead.

Quote:
[cite] ikko:[/cite]
Quote:
[cite] WinLinMac01:[/cite]Have you tried waiting life for 1-3 minutes at least? If that doesn't work, restart the installation one last time and look for any specific errors. If there are none, most likely it can be your DVD, what speed did you burn it at? It should be at the lowest, 2X.
Yes, I waited 30mins. However it's not ran. Also, my DVD burner or soft(CDBurnerXP) has 4x-18x only. Then I burned it as 4x.
And I got the error message as following before GUI.

mDNSResponder mDSN_Init Failed SandBox_init error

ikko

dred 03-22-2008 02:39 AM
Everything is working fine up-till now, I am getting system freezes when I try to save large files from photoshop or if I try to open up large rar files.(trying to open a 5.6 gb rar folder) I have tried cpus=1. does anyone have any suggestions.

10.5.2 re2 MBR EFI + 9.2.0 kernel
Processor - AMD6400+
Motherboard - MSI K9N Diamond
Memory - 4 gb kingston DDR2
Hard drive - SATA 160 GB /SATA 320 GB/ USB to IDE 320 GB(time machine)
Video card - ATI X1950 pro

spy974 03-22-2008 03:23 AM
Quote:
[cite] spy974:[/cite]
Quote:
[cite] ka911:[/cite]hi guys,
I did a guide (step-by-step how to install Leopard 10.5.2 AMD with pic)
http://www.mediafire.com/?htym3dt824x
Thanks for the guide dude.
I'll it this Week-end, and let you know if it worked for me. I 'll make a fresh install.
spy
Hi there,
I followed your guide. Now, I arrive at "Do you ready own a Mac ?" screen. Choose "Do not transfer my information" and then I return the first screen "Before you begin" (my keyboard cannot be identified....)
I have an usb keyboard.
What should I do now? (I tried to boot with -x -s -f)
Is it possible to bypass those screens and configure leopard later....and just use it??? :D
Thanks in advance,

SpY974

spy974 03-22-2008 03:58 AM
Quote:
[cite] spy974:[/cite]
Quote:
[cite] spy974:[/cite]
Quote:
[cite] ka911:[/cite]hi guys,
I did a guide (step-by-step how to install Leopard 10.5.2 AMD with pic)
http://www.mediafire.com/?htym3dt824x
Thanks for the guide dude.
I'll it this Week-end, and let you know if it worked for me. I 'll make a fresh install.
spy
Hi there,
I followed your guide. Now, I arrive at "Do you ready own a Mac ?" screen. Choose "Do not transfer my information" and then I return the first screen "Before you begin" (my keyboard cannot be identified....)
I have an usb keyboard.
What should I do now? (I tried to boot with -x -s -f)
Is it possible to bypass those screens and configure leopard later....and just use it??? :D
Thanks in advance,

SpY974
Ok sorry, I found the response :
http://forum.insanelymac.com/index.php?showtopic=80910&pid=573637&mode=threaded &start=#entry573637

Thanks Zephyroth, you rock dude

Merci encore ;)