InfiniteMac OSx86
Page 2 of 4 < 1 2 34 >
Show 50 post(s) from this thread on one page

InfiniteMac OSx86 (http://infinitemac.com/forum.php)
-   Leopard 10.5 (http://infinitemac.com/forumdisplay.php?f=85)
-   -   GMA 950 stuck at 1024 x 768 (http://infinitemac.com/showthread.php?t=2656)

bhp666 04-22-2009 08:28 PM
Quote:
Originally Posted by erick2red (Post 25117)
that's what we need to know. There's a post here in the forum about some new HDA controller, which i donwloaded but not try out, you could start but that point. Here is the thread
working perfectly.
thanks very much!

NebKiwi 04-26-2009 08:04 PM
Gma950
 
1 Attachment(s)
I had the same problem on my atom board desktop, what bootloader are you using? If your using chameleon or pc_efi you can load a DSDT.aml file on boot and it solves all GMA950 problems on desktops.. enables full 3d acceleration, res change, and rotation.. it hardwires the GMA950 address, because its a desktop card thats being used, Mac OS X had trouble finding it because all Macs that have it have laptop versions of the card :/ anyway, here ya go, if you don't know how to use DSDT files, let me know.. :)

erick2red 04-27-2009 01:27 PM
so, are you telling us, if we use DSDT patch, we can use stock kexts without patching it?

NebKiwi 04-27-2009 02:41 PM
Quote:
Originally Posted by erick2red (Post 25379)
so, are you telling us, if we use DSDT patch, we can use stock kexts without patching it?
Yes. On desktop versions of the GMA950 only though.

EDIT: If you use this fix, you NEED to use the stock kexts, not the frame buffer from tiger, otherwise it WILL NOT work.

erick2red 04-27-2009 05:54 PM
Quote:
Originally Posted by NebKiwi (Post 25384)
Yes. On desktop versions of the GMA950 only though.

EDIT: If you use this fix, you NEED to use the stock kexts, not the frame buffer from tiger, otherwise it WILL NOT work.
already tried that one, not working at all.

NebKiwi 04-27-2009 05:57 PM
damn
 
What device ID do you have? Mine is 0x2772.. and after the DSDT fix, its all perfect.

check out this

erick2red 04-27-2009 06:09 PM
That's the one i tried,.
My device is the same as yours.

NebKiwi 04-27-2009 06:13 PM
Chameleon 2.0
 
Sorry about asking this, I know it sounds like I am treating you like a noob, so I apologize, but sometimes it takes the simplest solutions...

where have you put the DSDT file? in chameleon 2.0, it doesn't go at the root of the drive like it used to, it now goes in /extra. Which bootloader are you running?

erick2red 04-27-2009 06:18 PM
doesn't have chameleon 2 yet...kinda afraid cause if chameleon II don't works the i had o reinstall the old one, and i had to do it through terminal, and don't know how...so still with the old chameleon.

NebKiwi 04-27-2009 06:22 PM
Chameleon
 
Ok, so have you got the DSDT file at the root of your boot drive? if yes, are you definitely sure that you have the stock kexts and only the stock kexts? (no natit etc) I can't see any reason why it wouldn't work :s it works with my card, and our cards are identical..