Quote:
What this causes is that you cannot run Disk Utility app on Snow Leopard installation drives. This can get worked around by installing BSD.pkg from your SL installation DVD. Hope it help you guys! Cheers! |
Quote:
@airwalk776 and all others with problems with Quadro NVS: Guys, the Natit package works really well OOTB... If it doesn't you need to troubleshoot in the usual ways:
This should work fine with no extra troubles, unless you have mess it up somewhere before. Hope it helps! Cheers! |
Small update #6:)
AppleAcpiBatteryManager updated to 64BIT version! Download it now!! |
Hi slic,
first thanks for the effort. I own a d630/intel gma x3100 and I also get a black screen with backlight on instead of the actual screen. I there a way to get the source version of the dsdl.aml file? So I could compare it to my version I compiled myself. Or even better, what patch was applied to get the x3100 working for you? Thanks. |
Quote:
I have DSDT.aml from my pack and works perffectly ;-) Use DSDT PATCHER GUI and compile new on your osx86 ;-) (DSDT PATCHER GUI have auto optimization). Download here http://tr.im/zSBh btw. don't forget boot with kernel flag (32bit): arch=x86 X3100 Currently no have yet 64bit kexts |
Quote:
Btw., do you get this messages at startup? Warning - kext com.apple.driver.AppleIntelGMAX3100FB has immediate dependencies on both com.apple.kernel* and com.apple.kpi.* components; use only one style. Warning - kext com.apple.driver.AppleIntelGMAX3100 has immediate dependencies on both com.apple.kernel* and com.apple.kpi.* components; use only one style. IG: Invalid firmware max backlight setting IntelMemory::init IntelMemory::init InitPool: offset= 0x08000000 size = 0x08000000 What bios version do you use? Do you use some kind of smbios.plist? Do you do something special to your dsdt? I mean the patcher only takes care of some minor issues and hpet and real time clock (rtc). besides that it does nothing to get your graphics working! I tried to remove the complete agp parts but that didn't work either. After this i'm stuck with a complete black screen... |
hmm..
yes this messages i have too i using smbios.plist in /Extra > Code:
<?xml version="1.0" encoding="UTF-8"?> dsdt is generated by dsdtpatchergui no another modifications |
Quote:
Well, downgrade to a04 didn't work either... i think i will give up for now |
Quote:
http://ul.to/ndseqf |
The DSTS.aml file in the pack is not working for me too. al I get is half a screen. with to me really looks distorted, I see the welcome movie. (well half of it). getting the same error messages as achtung. could someone drop me a line?
|
Ivefferen:
hmmmm, please test it with this DSDT.aml - link removed - And let me echo... |
thanks for the file but still no go, getting half the screen, and it looks distorted. when I delete the the file I do not even get the half screen. (same as earlier). tried to make one myself but those work neither.
|
Quote:
|
Quote:
tried everything from this kext-pack (quatro) here. os-x works but the grafix are not hw accelerated. i'm very close to giving up. Y |
Guys, I made it work with http://www.infinitemac.com/f36/intel...drivers-t3603/. Got 1440x900 QE/CI working. So if you cannot make ik work with stock drivers you could try this one
|
Hi slic, I have a compac presario c700 and everything works with iatkos 7 except wireless and my lappie is getting hot with the fan spiking every 30 seconds or so. Do you have or know of a kext that would help me out?
Thanks |
Quote:
And have you a stock AppleACPIPlatform.kext or modified?? |
Hi, not sure what you mean by wifi card man, but here are the specs of the lappie. I think the AppleACPIPlatform.kekxt is modified.
http://h10010.www1.hp.com/wwpc/uk/en...8-3466274.html thanks |
Quote:
The website is not good :/ There are no specific informations of your wifi |
Sorry, mate, I will try to get the info to you. I have heard others say it is a broadcom wireless. Does "802.11b/g WLAN" mean anyting?
And do you know of anyone who has one of these laptops running Snow? I tried using some config files by another user but the biggest issues is the gfx drivers (X300 by intel. It will often not boot into snow, stopping at chalky white screen. It also has a celeron cpu which you can bypass issues with by using the cpus=1 -v -f arch=i386 GraphicsEnabler=No flag. Any other help would be great. I have Kalyway 10.5.4 running flawelessly on this laptop Thanks for you help............. |
...make the gfx card on this lappie "X3100" pretty popular set by intel
|
oK man, the wifi card is a broadcom. But I cant seem to get this card going with iatkos 7 as there are no broadcom driver options in the install. Any suggestions?
Thanks |
@ynoc:
You can find Silent Natit on electro's repository: http://cid-8b65993ef55cf014.skydrive....x86%5E_64.zip It works like a charm for me, only thing that I lose is restart/shutdown... but I wasn't able to do that either on Leopard, already tried Psystar's OpenHaltRestart.kext to no avail... Hope this works for you! Cheers! |
Quote:
|
Quote:
Great work, I am waiting for it! ;) |
hi all, list of changes updated ;)
|
Big update #7:)
OKEY! The new update here! Download it now in fisrt post. Changes: - Installer package - New DSDT.aml with new fixes - Sleep now working - Fixed 64bit AppleACPIBattery manager kext - Sound with vanilla AppleHDA (Out/in/mic working) - Clamshell (without any kext's!) - Display dim - FFScroll (32bit but excellent driver for ALPS touchpad, you can set 2finger scroll and more features) - Boot with vanilla AppleIntelCPUPowerManagment ( without nullcpupowermanagment.kext). But not defaultly. Not stable for some hw. - Optimized smbios.plist - Some kext deleted and replaced |
Hello,
I got almost everything working using your installer, thanks. For some odd reason for the graphics and internet it gave me an error about the kexts not being installed properly, (must have been the version of boot132 I was using). I reinstalled package again and graphics installed fine. Now just the internet will not work. I've tried to use the 2nd Wifi card in my laptop, it's a Realtek (from MSI wind laptop) that I've used in Leo fine, but the WLAN configuration utility does not want to run in SL. Question: I have 10.6.0 and have used the installer package provided to install my kexts.. What is the safest way to upgrade to 10.6.1? Using built in updates and re-installing kexts after the update? Thanks Specs: D630: Quadro 135m: 4GB RAM. |
Thanx for the installer!
Quote:
I have a D630! 1) Will my internal monitor work with my standart resolution 1400x900? 2) Is it possible to select a target device for the installer? I'd like to install from my Leopard installation on an other Partition. But I cant boot until I installed your patches! Thanx for your help, teufel2k |
Quote:
|
Quote:
2) Install only to partition where is installed Chameleon bootloader or install new chameleon (integrated in pack). Another way is install files manualy from sources (download link in first post) |
Quote:
Thanks for you excellent work mate! What about that Original speedstep stuff, how do I activate it? I guess only unloading the nullpowermanagement stuff should do the trick right? Do you run without it? Thanks! |
Quote:
But on my d630 is snow with vanilla speedstep very slooow |
Slic,
Thanks again man, you really made all the harder work easy. *I fixed my ethernet issue by just deleting the ethernet kext completely and using wifi. *I fixed my natit.kext issue by re-installing it with the kext helper. Both issues for some reason said the kexts were not installed properly and could not be used. *Docking Station - Limited Support - Headphone jack doesn't mute audio from laptop. *Docking Station - Touchpad quits working after "undock" *the 10.6.1 update worked great. *I plan to test out the speedstep *also plan testing outputting to 1080p 32" via docking station. *I need to Repair my Hard Drive.. It says it does not pass Verification. Next Project: Next I will be working on dual boot with windows 7 and chameleon 2rc3. ----------> Laptop: Dell D630 w/Docking Station Ram: 4GB GPU: Quadro 135m Wifi: RTL8187SE Audio: Sigmatel 9205 Not Working: Built in Ethernet and primary wifi card. |
I'm very confused.
The systemprofiler tells me that i have a x3100 and under windows my native resolution is 1440x900! (sorry missed the 40px) The next resolution is 1280x768 in windows! Isnt that the same in all D630 ? |
Quote:
X3100 officialy don't support more |
Hm, what is so special with my X3100?
My internal Monitor doesn't work and on my external monitor there is no Problem with 1600x900! And I have got a D630 too! Hmm? perhaps someone knows the difference? Quote:
|
Hello i got several Problems..
I installed 10.6 in the D630 Harddisk using "OSInstall.mpkg" on my Macbook. Just the system, no fonts, no translations.. Then i installed chameleon bootloader 2RC3.pkg. After this i expanded your "DELL D620/630/830 INTEL X3100.mpkg", so i was getting intel.pkg which i also expanded. I copied everything in there, in the locations on D630 Harddisk. Then i did the followed in Terminal: (D630 HDD = "sl") cd /Volumes/sl/System/Library/Extensions chown –R root:wheel * chmod –R 755 * cd /Volumes/sl/Library/LaunchDaemons chown –R root:wheel * chmod –R 755 * cd /Volumes/sl/Library/Preferences/ chown –R root:wheel * chmod –R 755 * cd /Volumes/sl/Extra chown –R root:wheel * chmod –R 755 * Now i was booting the HDD in my D630 and the "after-install-screen" appeared. But only internal keyboard was working. I created my user and now i´m stuck in desktop. wifi works sound works x3100 works but usb fail (wake up in BIOS is enabled) touchpad fail Also appears multiple boxes with Messages, that "System extension cannot be used" "was installed improperly" What can i do?? |
Chameleon also uses the /Extra/Extensions for certain extensions. Just to be sure, run this from terminal:
Code:
chmod -R 755 /Extra/Extensions/ |
X3100 is just showing colors and lines
Hi all
After failing with other instruction sets for the D630 and failing to get QE/CI, I installed all this stuff on a fresh copy of 10.6.0 for my D630, and the system appears to be booting just fine. However, the display simply shows a bunch of colors and lines. Previously, I had gotten the X3100 to work with Leopard 10.5.2, including QE/CI, so I know it's possible. I still have an image of that disk around so I tried the EFI strings from its com.apple.Boot.plist. That didn't work. I also tried booting into Debian Linux, whence I dumped the DSDT, decompiled, edited the RTC section, and recompiled it using iasl. Then I put the new DSDT into /Extra. Still no joy. Can anyone share any other ideas for me? Is there some kext I should try changing or modifying? Some way of generating new EFI strings? A chicken to sacrifice? Help! |
Here its the same problem! Have you got a internal display with 1440x900?
External Display should work, give it a try! teufel2k |
Quote:
|
Dont fix Touchpad unless you have to..
"Touchpad is extremely sensitive
This is because the daemon is triggered. Download this file http://www.box.net/shared/b6mxm0odt8 and copy to /Users/USER/Library/LaunchAgents/" My system was really unstable and I couldn't run SL more than 30 minutes without programs beginning to not respond. I found out it was because of the above.. that file was overloading my ram after a while. In process manager it was listed over 20 times. I guess I didn't need it, my mouse isn't that sensitive anyways. Deleted the file from Launch Agents and it works amazing now. |
Meantime my Touchpad is running well. But usb & bluetooth is broken every second reboot. Which kext is responsible for these two?
Especially after runnig "diskutil repairpermission" much get broken. Why? |
Quote:
Yes, I have WXGA+ with a resolution of 1440 x 900, and the external display does work but that's no good on an airplane. Do the people with no problem own lower resolution displays? What is frustrating to me is that it did work nicely before, using Leo 10.5.2. I wish I knew why! |
Hi Slic. I downloaded the provided kext for my X3100/Dell630 machine. I have iatkos7 in ISO format burned onto a dvd. It's unable to boot with any kind of boot options or bios settings.
Please how can I update my ISO file with the provided kexts? Tanks a lot |
Quote:
Just noticed mine does the same thing... |
First of all I want to say thx for your great package !
I've done a fresh install off SL on my Dell D630 (nvidia+broadcomm wifi) All devices are working fine (wifi etc).. But I've two issues now and I hope you guys can help me out. 1. BIG ISSUE: My internal display won't turn off. When I want to go to sleep mode it just don't turn off. If I hit the power button again the power menu comes up again and I can click on cancel.. but there is no sleep, I think just because the display won't turn off.. (btw I doesn't turn off either after a few minutes of inactivity) Is this a problem with the nvidia kexts or powermanagent ? (I noticed QE is NOT working ! ) I hope you can help me because Sleep Mode is very important for me. (Reboot/Shutdown works fine) 2. Small Issue: the touchpad sensivity.. I tried the first soultion you posted and it worked but I had 10-30 of these processes which slowed down my performance. Then I tried the second soultion.. it is working much better than without the fix but its not gone completely. If there is a third thing I can do this would be great... So thats the curent state of my "hackbook" , I hope there is way to make it completely working. If you have any ideas I will be your testing candidate :-) thx ! eXpresion |
UDATE:
QE and Sleep now working ! What I did: Downloaded osx86tools and repaired file permission and clear cache.. Reboot.. Now QE wa working ! and Sleep also ! What is not working for now: Shutdown / Reboot Touchpad Lingon.app is not working anymore, I got it working again with the first solution, but I think it will slowdown my laptop again.. |
D620 Sleep
Quote:
|