|
Something like this? http://h10025.www1.hp.com/ewfrf/wc/genericDocument?docname=c00404367&cc=us&dlc=en&lc= en&jumpid=reg_R1002_USEN
The ATI Xpress 200 maybe a problem. Especcially the Xpress 200M chipsets for notebooks is problematic. The harddisk is slow, Audio isn't working on some laptops and you have no CoreImage/Quartz Graphics, what is the biggest problem. Here's a link in insanelymac: http://forum.insanelymac.com/index.php?showtopic=79194&hl=xpress+200 |
i managed to resolve that problem with Katana not Callisto, katana requires after install editing, the post install script doesn't do nothing, at least for me
|
I have tried Zeph's 1st release with full install, just not much luck on reaching final boot into Mac OSX. here is my sys info
ACPI Multiprocessor PC Operating System Microsoft Windows XP Professional OS Service Pack Service Pack 2 Internet Explorer 7.0.5730.11 (IE 7.0) DirectX 4.09.00.0904 (DirectX 9.0c) Motherboard CPU Type 2x DualCore AMD Athlon 64 FX-70, 2600 MHz (13 x 200) Motherboard Name Asus L1N64-SLI WS (1 PCI, 1 PCI-E x1, 4 PCI-E x16, 4 DDR2 DIMM, Audio, Dual Gigabit LAN, IEEE-1394) Motherboard Chipset nVIDIA nForce 680a SLI, AMD Hammer System Memory 2048 MB (DDR2-800 DDR2 SDRAM) BIOS Type AMI (07/18/07) Communication Port Communications Port (COM1) Communication Port ECP Printer Port (LPT1) Display Video Adapter NVIDIA GeForce 8500 GT (512 MB) 3D Accelerator nVIDIA GeForce 8500 GT Monitor Plug and Play Monitor [NoDB] (16491694505568) Multimedia Audio Adapter Analog Devices AD1988B @ nVIDIA nForce 680a SLI (MCP55P) - High Definition Audio Controller Storage IDE Controller Standard Dual Channel PCI IDE Controller IDE Controller Standard Dual Channel PCI IDE Controller IDE Controller Standard Dual Channel PCI IDE Controller IDE Controller Standard Dual Channel PCI IDE Controller IDE Controller Standard Dual Channel PCI IDE Controller IDE Controller Standard Dual Channel PCI IDE Controller IDE Controller Standard Dual Channel PCI IDE Controller Storage Controller Silicon Image SiI 3531 SATA Controller Floppy Drive Floppy disk drive Disk Drive Maxtor 7H500F0 (500 GB, 7200 RPM, SATA-II) Disk Drive USB Device Optical Drive ASUS DRW-1814BLT (DVD+R9:8x, DVD-R9:8x, DVD+RW:18x/8x, DVD-RW:18x/6x, DVD-RAM:14x, DVD-ROM:16x, CD:48x/32x/48x DVD+RW/DVD-RW/DVD-RAM) SMART Hard Disks Status OK Partitions C: (NTFS) 244999 MB (230898 MB free) D: (NTFS) 231938 MB (231862 MB free) Total Size 465.8 GB (451.9 GB free) Input Keyboard Microsoft USB Dual Receiver Wireless Keyboard (IntelliType Pro) Keyboard Standard 101/102-Key or Microsoft Natural PS/2 Keyboard Mouse HID-compliant mouse Game Controller Microsoft PC-joystick driver Network Network Adapter Belkin Wireless G Plus MIMO USB Network Adapter Network Adapter NVIDIA nForce Networking Controller Network Adapter NVIDIA nForce Networking Controller Peripherals Printer Microsoft XPS Document Writer FireWire Controller VIA VT6306/6307 Fire II IEEE1394 Host Controller (PHY: VIA VT6307) USB1 Controller nVIDIA nForce 680a SLI (MCP55P) - OHCI USB 1.1 Controller USB2 Controller nVIDIA nForce 680a SLI (MCP55P) - EHCI USB 2.0 Controller USB Device Belkin Wireless G Plus MIMO USB Network Adapter #2 USB Device Saitek X52 Flight Controller (USB) USB Device USB Composite Device USB Device USB Human Interface Device USB Device USB Human Interface Device USB Device USB Mass Storage Device DMI DMI BIOS Vendor American Megatrends Inc. DMI BIOS Version 0505 DMI System Manufacturer ASUSTek Computer INC. DMI System Product L1N64-SLI WS DMI System Version Rev 1.xx DMI System Serial Number SYS-1234567890 DMI System UUID 80C31844-8EFED511-9BDA0018-F3D5CC51 DMI Motherboard Manufacturer ASUSTek Computer INC. DMI Motherboard Product L1N64-SLI WS DMI Motherboard Version Rev 1.xx DMI Motherboard Serial Number MB-1234567890 DMI Chassis Manufacturer ASUSTek Computer INC. DMI Chassis Version Rev 1.xx DMI Chassis Serial Number Ch-12345678 DMI Chassis Asset Tag Asset-1234567890 DMI Chassis Type Desktop Case DMI Total / Free Memory Sockets 4 / 2 |
107FX, what exactly is your problem?
|
hi there!
new to this place... i'm on an asus notebook z53t with amd turion 64 x2 which sports the nVidia MCP51 controller. to zephyroth: thanks a lot for your work! i tried rev 1 but i couldn't install to hd because of the MCP51 which had serious problem (in tiger too) with the old AppleNForceATA.kext. i also tried install via vmware like i did with tiger but it stop with code signing error... i've been testing the new AppleNForceATA.kext by medevil (which you can find here: http://forum.insanelymac.com/index.php?showtopic=77071 ) and i can say that it works pretty good even on my MCP51. so i'm asking you PLEASE, PLEASE include this kext in rev 2. let me know if you plan to do it, or you if can point me to a ppf including this kext to apply to rev 1 iso. thanks a lot. |
For the 1000ths time, it's already included in Rev.2 ...
:-) But thanks ! At least you told me what works on your system ! |
sorry if i asked that, it's not always easy to find things already answered, especially in really long threads. can't wait! :-)
if you need my help for testing i'll be glad to do it. ciao |
@Zephyroth
Well here are the specs if u are still interested: Asus M2NBP-VM CSM (NForce 430B Micro ATX mobo) with SoundMax ADI AD1986A onboard soundcard and Marvell Yukon onboard Phenom X4 Quad GP9600 Black Edition Ati Radeon 2600XT To test it I will be using a Maxtor Diamond Max 21 160GB S-ATA HardDrive |
Yep but the administrator of the FTP is gone in vacation ... We need to create a new one.
|
ok
|
@ zephyroth:
If it's so problematic to find answers then start a new thread which shows the new features of RC2 only. This would be easier for us and less annoying to you to say everything again and again. But the users (to define: we) must understand that this is a developer's thread only, no posts, questions or anything else from others. It's the only way to keep a short overview of the changes and new features. |
@naquaada: I changed this to a Discussion Thread about Rev.2,
Regular Updates about Rev.2 can now be found here: http://osx.kbot.de/comments.php?DiscussionID=34 Stickied & Closed |
Zephyroth, thank you for including ATI 38XX support in revision 2. I have not been able to test your release because I experienced the bootloader issue. When you release revision 2, I will let you know how everything works (including my 3870). I really appreciate your work, thanks =)
|
Quote:
another thing: anyone knows about sli support? I have 2 6600gt in sli mode in winxp, but I have to turn to single mode to boot at leo. oh another things that I do NOT KNOW if its appropriate to say here in this topic but if not, just tell me and I remove it. any chance of a genius webcam usb works? and any chance of a genius mousepan tablet 5x4 works? It would be amazing if so... 3rd: 10.5.2 will be support for usb mouse working with ps2 keyboard? it didnīt work in 10.4.9 and 10.5.1. In 10.4.9 i did some mods in the kext to make it, but Iīve got lazy at 10.5.1 haahhaha anyway, canīt wait to use it. bring it on! :) |
Well, I got 2 AMD systems I can help test.
1) Compaq V6305ca Notebook - Turion x2 1.6ghz - 2gb ddr2 ram - Nvidia 6150go + MCP51 Chipset - PATA DVD, SATA HHD - Conexant Sound chip Currently running ubuntu gutsy and trying other linux stuff. whatever I can get my hands on. 2) Self built AMD BE-2350 Athlon X2 CPU - Asus M2A-VM HDMI - 3gb ddr3 ram (2x512mb, 2x1gb) A-data ddr2 667 - IDE Pioneer DVD - SATA Seagate 320gb HHD - Compro E500 PCI-e x1 TV Tuner - PCI Atheros Wifi Card. 5006 - Built-in Firewire - Built-in Video Card x1250 - Realtek ALC888 Sound chip Currently collecting dust because I can't get it to work properly as a media center, with Windows or Linux. My current main machine is an INTEL Hack. Running Toh Leopard DVD, efi v8, vanilla kernel and update to 10.5.1 Intel Core 2 Quad Q6600 G0 @ 3ghz (pin mod) 1.333ghz fsb 4gb ram ddr2 800 muskin Colorful X5 (P35) Motherboard PCI Broadcom WIFI Card Buffalo Nvidia 7900gs gddr3 256mb mod to Quadro FX 3500 OC to 650mhz core and 1700mhz memory Sata DVD. Sata Raptor 150 HDD, Sata WD Caviar 320 HDD USB Bluetooth, PCI Firewire Sound not fully working, only getting output, so its ok. Have not tried mic. front panel not working. ICH9 only 1 channel (2 sata working) Jmicron (working in ACHI mode only) If you need a beta tester I have 2 machines to test out... |
DoiX:
I install fine it seems(single OS Mac only on IDE) on reboot it has "system config file com.apple.boot.plist not found" I have read that some think it is a bad burn to dvd, or the file itself is bad? twice downloaded and 4 burns with same result. maybe I will have more luck with Rev.2 Thanks again for any help with 1st release and Rev.2 as well! |
@1207FX What kind of partition scheme have you selected, GUID or MBR?,
|
My report about Rev.2 Installation:
I'm testing Rev.2 in my notebook: CPU: AMD Mobile Sempron 3400+ (SSE3, 64bit) VGA: Nvidia GeForce Go 6150 Chipset: Nforce MCP51 HD: Fujitsu SATA 40GB LAN: Nvidia Wireless: Broadcom Installation goes fine with some combination. But, after install, when I try to boot with grub I get the message: Invalid or unsupported executable format. Someone have an idea on how to correct this problem? Well, I made something, downloaded netkas pc efi v8 (I have to use some special for amd???) put on grub as kernel, so I get boot on Leo, but, I get message from Nforce Sata driver, something like: AppleNforceAta: scan 1 disks found (... other system messages ...) Until here is ok, but for some reason Leo tries to load again and I receive this: AppleNforceAta: scan 0 disks found AppleNforceAta: sata phy reset failed And... Still waits for root device. Someone can help me? Maybe it could be because on installation I choose to install the newest kernel??? |
Zephyroth Leopard 10.5.1 AMD rev. 1.
<a href="http://img205.imagevenue.com/img.php?image=39549_Picture_1_123_561lo.jpg" target=_blank><img src="http://img205.imagevenue.com/loc561/th_39549_Picture_1_123_561lo.jpg" border="0"></a> Asus A8N5X, sound adapter Realtek ALC850 @ nVIDIA nForce4 (CK8-04) - Audio Codec Interface, IDE HDD secondary (primary - WinXP), EFI MBR, all ATI.kext with original DVD + Natit.kext (two displays in the same way work), nVIDIA nForce4 completely works (LAN, audio), NTFS3G for Windows NTFS read-write. With impatience I wait rev. 2! Forgive my bad english... |
very goodd
|
Hi Zeph and testers,
any chance that AC'97 digital output will work with Rev.2, mine is ALC850 chipset. If not, can this be considered for a later update please. |
roisoft: or anyone with ideas
I used all three mac/mbr/guid many tries on install lol actually kind of fun trying all these installs. checked and unchecked Nvidia drviers, same result. I havent got far enough to be able in install kext so your guess is better than mine. Of course like any other member, would be pleased to test Rev2 also |
hello members, rev 2(beta) has given me a heart attack :( i installed it 15 times and still don't know what's the problem... i managed to make it work only one time, but i had to reinstall it again to be sure it works ~X( and it doesn't :((. i'm still trying to figure what the @#$% rev2 doesn't like on my system I'M NOT GIVING uP
|
@ 1207FX
Try this (if you want, of course) copy the file to pendrive formated in FAT labeled "EFI" boot into install dvd and open disk utility and format the HD and choice the GUID scheme, close the disk utility, plug the pendrive, open a terminal and type this: diskutil list take note of hd number (diskX, X=device number) (e.g. if it disk1 - then X = 1 (X will be used later) cd /volumes/efi/pc_efi_v80 umount -f /dev/diskXsY (X=hd Y=partition) ./startupfiletool /dev/rdiskXsY ./boot_v8 dd if=./guid/boot1h of=/dev/rdiskXsY bs=512 count=1 dd if=./guid/boot0 of=/dev/diskX bs=400 count=1 your guid drive should be ready for booting now, close the terminal and follow with the install. http://www.mediafire.com/?8leyyohmegw |
Thank you Roisoft
I shall try it. no pen drive, BUT I have usb HD......... will let you know how it goes:) after a few tries at installing with the USB HD no luck. (sysytem config file "/com.aple.boot.plist" not found) may have to go buy a flash drive anyway |
can't wait for revision 2. i still haven't gotten the first one to work on my amd laptop sadly, i been trying day in and day out to get it to work but i constantly have problems when adding the IONetworkingFamily.kext(don't think this is the problem) and the AppleACPIPlatform.kext(this one gives me the problem). so as for now i'm trying to get the JaS release of 10.4.8 to work and i am downloading the tubgirl 10.4.9 release to work. i have had no luck with any AMD release yet. and my computer is only 2 months old. sad huh. whatever though.
|
Hey zeph,
I'm looking forward to Rev. 2 and I have a little question about it: I've got a kernel panic, something like this: Panic (cpu 0 caller 0x0036DAC7):"Process 1 exec of /sbin/launchd failed, errno 88\n"@/volumes/disk1s2/leo_xnu-1228/bsd/kern/kern_exec.c:2884 (see here: http://osx.kbot.de/comments.php?DiscussionID=19&page=2#Item_46) May it work with Rev 2? Thanks a lot for this wonderful work and this forum. I like you, guys ;-) |
Hi Zephyroth
I had installed REV1 on my PC. but I could not install my graphic board driver and nFORCE lan driver automatically. Can i install them automatically by using REV2_image? Please give me your message thank u :) (MY PC SPEC) MB:GIGABYTE GA-K8N pro SLI CPU:Athlon64 X2 3800+ (socket939) RAM:1535MB(DDR400) GB:RADEON X800GTO NA:Intel PRO/1000 GT Desktop Adapter & NVIDIA nFORCE Networking Controller DVD:NEC DVD_RW ND4551A ATA Device SB:Realtek AC'97 Audio HDD:HITACHIHDT72252 5DLA380 250GB |
Can anyone tell me if this release will recognise my ata and sata hdd without any problems?
|
Hey Skyper. I don't know really, what your problem is, but try following:
- plug the DVD-Rom and the HDD about one cable into the IDE or SATA port - set the HDD to Master (by setting the jumper on your HDD) and the DVD-Rom to Slave (by setting the jumper in the middle section of the pins) Now check in your Bios, if the devices can be detected to Master and Slave and try again. I had a similiar problem and it worked with this way. Check this thread out: http://osx.kbot.de/comments.php?DiscussionID=19&page=2 |
@crawle
Thanks for you reply but i dont want to open my computer specially for this. All i wanted to know is if it will be detected in rev2 without the need to mess around with the HDD and opening the whole comp. |
@skyper
I guess it could be intimidating to someone who hasn't opened the side up on your PC, but it is very simple. You should see my Machine........lol have 3 drives hanging out the side onto the desk trying different methods of install. However if your running a PC with factory warranty, then I could understand. I too am hoping Rev2 eases my pain :) |
1207FX: Same scenario for me here when testing betas on several HDDs with one Machine, and I love it :)
|
My HDD slides up and down in my pc, 'cause I had to bring it one track up (cable to short) and there are no fitting holes for fixing the HDD. ;-)
|
@crawle: Not good! Your HDD really shouldn't slide, make sure that it has a rock solid position and doesn't move!
|
Oh, alright. I'll fix it ... however ... Thanks
|
still waiting for an answer...
|
what was the question again?
|
here:
Quote:
|
braid there's a lil' solution for the ntfs problem :) you need to have on the hard a partition ntfs and another hfs+(with leo installed on it).this works.. at least for me :)
|
If interested i can test on my new machine i received yesterday;:
AMD X2 6400+ Black Edition Gigabyte GA-MA770-DS2 GeForce 8800GT 2x2GB DDR PC8000 GSkill 5-5-5-15 Creative Sound Blaster X-fi extreme Music Seagate 7200.10 320GB Seagate 7200.9 160GB |
Puttabong what do u think?
|
Quote:
Skyper, I will contact you as soon as possible, zephyroth is currently fixing a few problems about Rev.2 and then you can test it, like many others who would like to do so! |
Puttabong, I have an Asus K8V SE Deluxe that I can install tiger on with ease, however Zeph's ver 1 won't install. I've tried everything and have been trying for about a month.
I would really love to test rev 2 for all the people with K8t800/VT8237 Chipsets that can't even get to the installer. Please let me know. |
still no booting into Mac OSX yet............... hangs at( localhost kextd[I0]: IOKitWaitQuiet() timed out waiting to write kernel symbols )
single IDE no dual OS booting thanks for any help |
Puttabong and ShadeZero.
I have removed your posts on Beta Test Reports in order to keep the thread clear. For discussing about it, I prefer to stay here. The skge package is now installable. I will put the modified OSInstall.mpkg on ftp this day. |
"I think I just had an Ear'gasm..lol"
It hasn't got to the point of heaving my PC from the window yet, but my eyes have crossed a time or two. I get to take a break and go to work now. Best of Luck to all Testers! |
hi Zeph, and thanks for making this possible for all!
|
Any possibility of running Leopard ( like u :) ) on this laptop
I tried the JaS DVD release for 10.4 on this but could'nt able to run as i have Sata HDD & no option in BIOS to make it IDE :( Please let me know if there is any possibility of getting it even via VMWare Here is my Sys details : Processor type AMD Turion 64 X2 Mobile Technology TL-50 memory : 1 GB DDR2 memory Hard disk controller : SATA Hard Disk Drive Optical drive type : Super Multi DVD Writer (+/-R +/-RW) with Double Layer support Network interface : Ethernet 10/100BT integrated network interface Wireless technologies : broadcomm 802.11 a/b/g WLAN Video adapter : NVIDIAŪ GeForce Go 6150 (Up to 128 MB shared video memory) |
Hi prateesh,
I guess your setup could work, the only thing that I'm not sure about is your video card/adapter. However, if the Tiger JaS DVD didn't work, then I'm not sure if Leopard could do the job. You can try it though! I personally suggest that you wait a few days, until Revision 2 of the DVDs is released by zephyroth. You can also consider trying Rev.1 until then, but you will have to manually fix the bootloader and some other issues. Kind Regards, Puttabong @ this System -> http://www.imagehut.eu/images/1088Bild%202.png |