|
if that's the only way, I'll do that after the install, I had a gentoo on this box before.
|
Ok, you have nVidia nForce4 Pro 2200/2050 chipset
<a href="http://img405.imageshack.us/my.php?image=sunxf2.png" target="_blank"><img src="http://img405.imageshack.us/img405/2623/sunxf2.th.png" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a> What graphics? Quadro fx, Nvs? |
The device id is 0x00cd (0x00cd10de with nvidia part).
I don't know exactly what card is it. But I think it's an old one. Edit : Seems to be a Nvidia Quadro FX 3450/4000 maybe after a google search. It's written "Nvidia quadro fx" on it. |
you need to re-edit the Info.plist of Geforce.kext NVDANVx0Hal.kext and NVDAResman.kext with your DeviceID only without &0xfff0ffff
|
Do I need to install NVinject or just Nvidia universal installer before that ?
|
First try with Nvinject
|
With one drive and before installing NvInject :
http://img337.imageshack.us/img337/9343/picture1hi0.png |
Ouf !
Nvidia works ! http://img301.imageshack.us/img301/7171/picture2tc9.png How I can send you a snapshot of the system profiler ? What can I do for the Lan ? Do I need to try again the new forcedeth kext files ? Thanx again, iero. |
OS: MacOSX Leopard 10.5.1 (Zephyroth)
CPU: AMD Sempron 3000+ Mainboard: ASRock K8Upgrade-NF3 Mem : 1,5GB DDR Graphics : ATI Radeon 9600 Pro Audio : onboard AC97 Ethernet : onboard Hard drives: IDE / S-ATA DVD : Atapi |
OS: MacOSX Leopard 10.5.1 (Zephyroth)
CPU: AMD Opteron 1212 - 2GHZ Mainboard: Gigabyte GA-M61P-S3 / NVIDIAŽ GeForce 6100 / nForce 430 chipset Mem : 3 GB DDR Graphics : ATI 128mb Radeon x550 (NOT WORKING) Audio : Realtek ALC883 Audio Codec (NOT WORKING) Ethernet : onboard Realtek RTL8211 Gigabit Ethernet controller (NOT WORKING) Hard drives: IDE w/ Vista - SATA w/ Leopard DVD : Atapi Need some help - I finally got the system to boot into Leopard, setup acct etc. Runs fine is stable. However, I have no sound, No ATI video card support and the onboard LAN does not work. Ive tried to find the kexts for the lan and sound, but have not been successful. WIth looking, I think I can manage the ATI video issue. Help is appreciated scott |
crencom, you and i have the same motherboard, i know that the lan does not work. I tried a lot to get it to.. eventually got a new nic off ebay for the cheap and used Tulip drivers to get it to work. As for the sound card, all you need is the ALC883Audio.mpkg and google found it
http://files.filefront.com/ALC883Audiompkgzip/;7166030;/fileinfo.html the NIC that I bought was the same as, and same seller too http://cgi.ebay.com/PCI-10-100-Realtek-8139-LAN-Network-NIC-Adapter-p155_W0QQitemZ180215264550QQihZ008QQcategoryZ64049 QQssPageNameZWDVWQQrdZ1QQcmdZViewItem he says it is realtek, but I am not sure. It was made by Tenda (model # TEL9939DI) and shows up as an ADMtek AN983 - thus the need for the Tulip drivers. Shipping was slow as it was so cheap. But it works! hope that this helps. |
|
OS: Still Windows XP 32 Bit =(
Motherboard: Motherboard Name: MSI RS482M2/RX482M2 (MS-7093) (ATI SB400) (AMETHYST-M) Motherboard Chipset: ATI Radeon Xpress 200, AMD Hammer Motherboard ID: 03/03/2006-RS480-SB400-6A666M4DC-00 North Bridge: ATI RS482/RX482 Network: Realtek RTL8139-Familie-PCI-Fast Ethernet-NIC CPU: CPU Type: DualCore AMD Athlon 64 X2, 2200 MHz (11 x 200) 4200+ / Manchester S939 / x86, x86-64, MMX, 3DNow!, SSE, SSE2, SSE3 CPU stepping: BH-E4 Graphics: NVIDIA GeForce 8600 GT (256 MB) Audio: Bose Companion 5 USB What do you think guys, will zephs 10.5.2 work with my hardware? |
OS: Windows Vista 64Bit, OSX 10.5.1 (Zephy's image)
CPU: AMD Athlon 64X2 6400+ (dual 3.2ghz cores) Memory: 4 Gig Corsair XMS DDR2 Motherboard: Asus M2N-SLI Deluxe (Nforce 560(i think) ) Video: Evga 8800GTS 320meg PCI-x HDD: 350 gig Segate Sata2 (Vista) 180gig WD EIDE (OSX) Lite-ON SATA DVD-r/rw Monitor: HP W19E, 19" widescreen LCD.. running in 1440x900, full support QE/CI Logitech Quickcam, Logitech MX1000 Mouse, Logitech USB keyboard On board networking wouldnt work, so i threw in a Linksys lne100tx, and the tulip kexts .. just disable DHCP and IPv6, and you're good to go. Sound needed the aziliaaudio package, however, no input. But, the logitech quickcam provided a USB mic, so there's input :D I've installed EFI recently, and i'm preparing to go to 10.5.2, let you all know how it works. 10.5.2 installed w/o a hitch :D |
OS X: Leopard 10.5.6 by iATKOS (10.5.1)>Kalyway(10.5.2)>Apple
OS X: Leopard 10.5.6 by iPC Board: Gigabyte EP45-DS3R CPU: Intel C2D E4500 (2.2GHz @ 3.0GHz) Graphics: Gigabyte GeForce 8500 GT 512 Silent HDD 1: Seagate Barracuda 250GB (OSx86) - SATA as IDE HDD 2: Seagate Barracuda 500GB (Win 7) - SATA as IDE HDD 3&4: Seagate Barracuda 2x 120GB as RAID0 (Vista) HDD 5: Seagate Barracuda 200GB USB (OSx86) - SATA as AHCI DVD/CD: Asus -RW - SATA Control: Apple Aluminum Keyboard, Wacom Intuos3 Tablet Monitor: Dell 24" 2408FWP |
Processor: Intel Pentium D 805 2.66GHz ovk@3GHz
Motherboard: Asus P5LD2 REV 1.0 Memory: 4G DDR2 667MHz Corsair XMS2(ram is @800MHz but a can't run at 800MHz cause of my CPU) Graphic card: Asus ATI Radeon X1600 PRO Silent 256Mb Display: Samsung SyncMaster 223BW 22" DVD-Rom: Asus DRW-1814BLT SATA Hard drives: 1. 500Gb Hitachi SATA II, 2. 320Gb Seagate SATA II Keyboard and Mouse: USB OS1: Retail Mac OS X Leopard 10.5.8 OS2: Windows 7 x64 build 7127 |