Originally Posted by adrianmak (Post 34918)

is the ADI988b.Fix.kext work on both 32 and 64bit kernel boot ?


Besides, are you guys with Asus P5K-E wifi/ap motherboard, under the Serial-ATA of System profiler
my information of Serial-ATA shown like this
http://i36.photobucket.com/albums/e2...5at45602PM.png

is it shown correctly ?
The jmicroATA shown as unknown. How to fix it ? My jmicro is configured as AHCI mode in bios.

Originally Posted by fishcow (Post 34881)

Hey Chrisb27
I'm by no means and expert. I managed to get my install working by using all the information in this thread.
One thing I would say, I doubt you will have much luck using other people's dsdt.aml files.
I would suggest the following:
1. Generate your own "patched" DSDT file using DSDT_Patcher1.0.1e or DSDTPatcherGUI.

2. Start off with the newly generated DSDT.dsl file - which is editable in a text editor.

3. You could either go back through this thread and copy all the relevant code and save as separate text files to add to your custom DSDT.dsl file . . . or decompile either of the 2 DSDT.aml files you downloaded from here, using either iasl or "drag and drop" version iaslMe. Then go through and cut and paste all the relevant sections.

FWIW, I started with a DSDT.dsl file generated by DSDTPatcherGUI.
Then I followed the thread and entered the following patches manually:

AUDIO:
walterav method:
http://www.infinitemac.com/f57/how-t...post31049.html

USB (a)
Omargoa method (zhell)
http://www.infinitemac.com/f57/how-t...post31592.html

USB (extras) + SATA (Intel ESB2 AHCI )
Snoc method
http://www.infinitemac.com/f57/how-t...post34233.html



I have the following kexts installed:
OpenHaltRestart
AD1988b.fix
SleepEnabler
PlatformUUID <---- edited with UUID of my boot partition
NullCPUPowerManagement
IONetworkingFamily <----- edited yukon
fakesmc
Disabler <----- edited to disable Nvidia DRM (mouse lag issue QT / iTunes) for NVIDIA 8XXX series and up (9800 GT used in my machine)

In the BIOS I have JMicron PATA /eSATA disabled.

In /EXTRA I just have a custom smbios.plist and a custom com.apple.Boot.plist with EFI strings for my GFX card and Ethernet.
AND my dsdt.aml file of course.

I hope that is helpful.
Fish

Originally Posted by adrianmak (Post 34938)

Last but not the least. In About this mac, my CPU shown as unknow
http://lh6.ggpht.com/_h2T836il8i4/Sq...Q/DSCF4199.JPG

how to show it correctly? Mine cpu is Q6600 core 2 Quad

Thx Snoc posted jmico kext on #191 to show properly in system profiler.

Originally Posted by Chrisb27 (Post 34959)

Edit AppleSystemInfo.strings that is located at /System/Library/CoreServices/Resources/English.lproj/. Edit UnknownCPUKind

Originally Posted by adrianmak (Post 34967)

Is there any injector kext instead of editing Apple original kext ?

Originally Posted by lancelotu (Post 30090)

This is for P5K-E Wifi a/p Motherboard but it should work with other P5K models
Try this at your own risk. Thanks again to XyZ .

put the AD1988b.Fix.kext in /System/Library/Extensions repair it's permissions and replace your DSDT.aml with the one from the package and you're good to go . I attached also the .dsl file .

Attachment 394