|
Have you visited the Wiki?
Quote:
|
Hi,
My setup: Boot Image: Zephyroth Leopard-10.5.2-AMD-EFI Rev.2 CPU: AMD Athlon 64 X2 4000+ Memory: 1gb DDR2 800 Motherboard: Asus M2A-VM HDD1: Maxtor 6Y080M0 Sata 80 Gb (working) HDD2: Maxtor 6B160P0 Eide 160 Gb (working) HDD3: MAXTOR STM3500630AS 500 Gb (working) DVD rw: TSSTcorp CDDVDW SH-S203P Lighscribe (working) Video: nVidia 7300GT 512 (working) chipset VIASB600 (working) Audio 883 6 Ch (working) Lan RTL8111b (working only on internet; no AFP; no SMB;) With rev.1 and RealtekR1000.kext the lan is full working, now, with rev.2 the lan is only working on internet. Why? Thanks |
Quote:
When I boot the leopard install disk(generally with -v, but have used -v -x -s -f in many different combinations), the boot information looks healthy, it probes the USB devices and finds them, but about a second later it calls for a I/O reset, and that seems to turn off my USB devices(I've used PS/2 devices, and the same thing happens). I've tried a million different things, and especially the obvious things. I really don't think there's anyway to get around this issue without compiling a new USBIOFamily.kext that matches this motherboards I/O ID's. |
How about ext3 support? is the same that can destroy partition or can i use it sure?
I'm blushed |
Hey guys, I downloaded Zephyroth's Leopard 10.5.2 EFI Rev.2 but I can't install it. When I try to boot like many others I get the dreaded "Still Waiting For Boot Device"" message. I've been looking through forums all day but can't find a solution. I removed my SATA DVD Burner, and set my IDE DVD Rom as master and still nothing. When I type in -f -v I get EBIOS errors.I burned the ISO at 4x using Nero 8, so I don't think the DVD has any errors. Any Suggestions?
Here Are my specs: AMD Athlon64 X2 4600+ 2 Gigs DDR2 800 Corsair Ram WD SATA Caviar SE 250 Gig XFX GeForce 8600GT XXX IDE Sony DVD Rom (Master) |
I have tried both Zephyroth dists and both of them start from dvd but when the Apple Logo appears the background goes grey and a windows appears that writes that I should restart the pc in various languages. What is wrong? I burn the ISO on a DVD+RW, is this wrong or my specs are not compatible?
AMD Athlon64 3200+ MSI NEO Platinum M/B 3x512Mb DDR Kingston RAM 3xWD SATA 200Gb Sapphire x1650 256Mb IDE NEC DVD RW Please help |
when you boot from the disk press f8 and than type -v
and let us know what error you get |
hi...
again i disappointed with this dvd...( Zephyroth's Leopard 10.5.2 EFI Rev.2 ) i tried to install ... but i got only this.... OHCI_controller _ bala bala.. " still waiting for root device " chek out screen shot for more... my sys config AMD 3200+ / Asus a8n vm Graphics Chip set MB(nforse610) / 1 gb RAM / 120 gb Sata /Sony DVD rw PS/2 keb/mouse install info - 120 GB sata installed in second sata slot / dvd drive ide connect in primary salve - In C: drive i have installed xp... it's fat32 - after install fail... my MBR corrupted " NTLDR file missing" after that i managed to bring back xp.... but still looking for mac only.. i like mac os ... i want to install.. plz... help me to install.. but some guys installed in same config. i dont know why not able to me... help me i have plan to buy new HDD drive for mac.... i am bit confused IDE or SATA which one suits for my pC so help me... in right way.... thanks in advance |
Quote:
|
Well I have burn it to DVD+R but again the same. I used -v and the results you can see them on the attached picture.
Is there any "cure"? |