InfiniteMac OSx86
Page 24 of 103 « First < 142223 24 25263474 > Last »
Show 50 post(s) from this thread on one page

InfiniteMac OSx86 (http://infinitemac.com/forum.php)
-   10.X (http://infinitemac.com/forumdisplay.php?f=36)
-   -   Asus K50IN (http://infinitemac.com/showthread.php?t=4409)

flip360 02-09-2010 11:08 AM
Nice to see that all is well :)

mao_red 02-09-2010 12:54 PM
Great job flip, you just updated the first page of this thread! :)

Cheers!

flip360 02-09-2010 03:32 PM
yes, thanks to Buhgalter and the russian crew :)
i used the ApplePS2Controller rus modified and i have a working trackpad after waking from sleep :)

Thanks and Cheers

axelus 02-09-2010 03:37 PM
How can I create a Dual Boot install?!
When I try to install SL on the same disk as Windows 7 i am always getting an error that says i have to install on an guid partition table (But I don't want to reformat the Drive), first i've created a Mac OS Extended (Journaled) Partition and marked as active.

So what to do now?!

Buhgalter 02-09-2010 04:10 PM
Quote:
Originally Posted by axelus (Post 44729)
How can I create a Dual Boot install?
You can look here.
And I can say that I have installed 10.6, after that I installed Windows to the second partition. All was fine. After that I booted from boot CD into the OSX. But when I have installed Chameleon v2 onto the EFI partition it broke windows os...

UPDATE: New ASUS-K50IN-BootCD version 2 is available with new features and no bugs!

Quote:
ChangeLog of version 2:
1) A touchpad is working during the installation and when the system starts with bootCD (ApplePS2Controller.kext compiled special for Elan Ps/2 Port Smart-Pad by Rus).
2) Corrected info.plist in HPETDevice.kext for better compatibility
3) Included a folder of Tools (Kext Utillity, Show-Hide Files tool, Chameleonv2RC4.pkg by Dr.Hurt).
4) Included a folder of Kexts - all the necessary drivers

mao_red 02-10-2010 06:05 AM
why my webcam is not working? :-/

and..

Code:
Unknown nVidia card:

  Chipset Model:        Unknown nVidia card
  Type:        GPU
  Bus:        PCI
  VRAM (Total):        512 MB
  Vendor:        NVIDIA (0x10de)
  Device ID:        0x0873
  Revision ID:        0x00b1
  Displays:
Display:
  Resolution:        1366 x 768
  Pixel Depth:        32-Bit Color (ARGB8888)
  Main Display:        Yes
  Mirror:        Off
  Online:        Yes
  Built-In:        Yes
Display Connector:
  Status:        No Display Connected

Buhgalter 02-11-2010 04:02 PM
My Dual Boot Snow Leopard & Windows 7
 
Quote:
Originally Posted by buhgalter
P.S. As for me I haven't the dual boot yet...
Ok. Now my dual boot works perfectly.
I have the dual boot with chameleon (installed on EFI partition)!
I have booted from windows DVD ( run > cmd > diskpart > select disk 0 > select partition 3 > active > exit )& reboot. One more time I have booted from windows DVD. And I have repaired my windows without any problems. After that I set the EFI partition as active from windows ( run > cmd > diskpart > select disk 0 > select partition 1 > active > exit )
After reboot and chameleon works fine...

cheers

mao_red 02-11-2010 06:40 PM
Quote:
Originally Posted by RGGG (Post 42823)
Is there any way to get the default apple boot image instead of a debug? I know its not critical, but it would be nice to see the apple logo at boot, instead of reading the same boot code over and over each time it boots!


Ryan
bump, anyone/

kokozedman 02-11-2010 07:57 PM
Quote:
Originally Posted by mao_red (Post 44877)
bump, anyone/
Here is how you get the better looking Apple logo at the boot phase.
  1. Look at your /Extra/com.apple.boot.plist file.
  2. Find a line with Kernel Flags
  3. Remove the -v that you see there. That actually means, verbose boot, which shows all these debug verbose boot message, that can used to somehow debug the boot process.
If you need it back, just add the -v in, or during the boot:
  1. Select your Hack partition (that one that contains the Mac)
  2. Type directly -v
  3. The press Enter key

kokozedman 02-11-2010 08:02 PM
Quote:
Originally Posted by flip360 (Post 44728)
yes, thanks to Buhgalter and the russian crew :)
i used the ApplePS2Controller rus modified and i have a working trackpad after waking from sleep :)

Thanks and Cheers
What's up flip360. Could you share your Extra folder with us? I never got sleep to properly work ...

I tried once, and it seemed to work, but the PS/2, the Trackpad and the USB (including the mouse that I clicked to wake it) is no longer working. Resulting in a non-responsive system.

I could press the power button, and got the choice to shutdown, restart ... but since there is no keyboard working, I couldn't validate anything. So, had to reset the computer.