InfiniteMac OSx86
Page 29 of 30 « First < 192728 29 30 >
Show 50 post(s) from this thread on one page

InfiniteMac OSx86 (http://infinitemac.com/forum.php)
-   Leopard 10.5 (http://infinitemac.com/forumdisplay.php?f=85)
-   -   LawlessPPC Phenom & AMD 10.5.4 Beta Release Discussion (http://infinitemac.com/showthread.php?t=1250)

thagg1975 02-20-2009 04:08 PM
Hi Lawless,
can you have a look here for a problem I have w/rgds ACPI? Seems the 10.5.6 upgrade has overwritten something from the kexts used and now no shutdown/reboot/sleep is possible. Other things are alright...

LawlessPPC 02-21-2009 03:53 PM
Quote:
Originally Posted by leonardodemarco (Post 22533)
Lawless,

Im in OSX now , and i have a issue with the HD4850 . i have a 1440x900 monitor and getting 1024x768 , how i get the driver ~:'(
you need to search for a hd4850 kext try natits site

LawlessPPC 02-21-2009 03:57 PM
Quote:
Originally Posted by m9c0sx (Post 22536)
Many Thanks Lawless.

Another 780G here now running OSX. SB700 kext is a must! My install setup was with IDE dvd drive and a SATA hdd running on Native IDE. Install took 20 minutes.

One thing I noticed is OSX only reporting 1 core instead of 3 for my Phenom Triple Core. Do I need to apply some patch for 3 cores to work?

Thanks
if you look in activity monitor you'll see that there is a graph for every core. About this mac relies on smbios.kext this can be replaced to be more accurate. Trust me its using all cores just about this mac doesnt know about them

m9c0sx 02-23-2009 01:36 AM
Quote:
Originally Posted by LawlessPPC (Post 22669)
if you look in activity monitor you'll see that there is a graph for every core. About this mac relies on smbios.kext this can be replaced to be more accurate. Trust me its using all cores just about this mac doesnt know about them


You were right. Activity monitor is showing 3 cores.

Another question. Can i run Mac OS update like to install 10.5.5 via the Software Update? or that will mess up my current install?

Thanks

Taisto 02-23-2009 01:49 PM
Quote:
Originally Posted by m9c0sx (Post 22713)
You were right. Activity monitor is showing 3 cores.

Another question. Can i run Mac OS update like to install 10.5.5 via the Software Update? or that will mess up my current install?

Thanks
If you`re on Intel and running Voodoo kernel, it should be ok. If you`re on AMD - even using the Voodoo kernel it could mess...better try to patch the combo update with Zephyroth`s patcher. Try on your test OS first cause it always can go wrong.

zuz242 02-24-2009 11:24 PM
Quote:
Originally Posted by m9c0sx (Post 22713)
You were right. Activity monitor is showing 3 cores.

Another question. Can i run Mac OS update like to install 10.5.5 via the Software Update? or that will mess up my current install?

Thanks
As Taisto said, it depends on your machine. amd needs patched files, either with zephs updater or realtime patching with voodoo kernel. i did update via zeph first and installed kernel later as it said in the readme voodoo is having proplems with a system prior to 10.5.5.

The update of lawlees to 10.5.5 went really smooth, 10.5.6 is a pain in the arse so far ;)

EDIT: patched combo update to 10.5.7 worked ;)

cmopass1982 03-07-2009 07:14 AM
Hi all,

I am new to this forum as well as OSX86. i need help and advice on how to do the installation. This is my pc spec:

AMD athlon x2 4200+
asus m2n sli mobo (nforce 560 sli)
msi 8600gt 256mb
2 sata hdd and 1 ide hdd(which will be used for leopard)
1 ide dvd writter

is my pc spec meet the installation of lawlessppc 10.5.4? if i unplug the sata hdds, set my ide to primary master and dvd writter as secondary master, is this setting ok for installation?

thanks,
compass1982:)

Phi 03-09-2009 09:23 AM
1 Attachment(s)
Hello every1 and greetings from Italy! I'm getting this image now as I've had pbms so far with kalyway-ideneb-leo4all (no HD detected at install) so nowhere to install at disk utility screen. My hardware report is attached, any hint as to which items I should choose at install? If the sata hd is not recognized how can i solve this? Thanks for all the support, I'll be glad to share my experiences after installing! :)

allkindsofralph 03-23-2009 09:05 AM
would this work on a HP a6750f

AMD Phenom X4 9650
AMD 780G / SB700 Chipset

neinGott 03-29-2009 02:02 AM
A Extensions.mkext compilated for sb700
 
Hello everyone, sorry to bother, I am trying to install the distro (LawlessPPC-Leo-10.5.4-Phenom & AMD) in a motherboard with southbridge sb700, but nowhere is a "Extensions.mkext" compiled for this disto, so I ask if I can compile a please because I do not have Mac OS or know anyone who has one. Or can point me where can I download one.

I appreciate your help
Sorry for my English (not my native language).

MSI KA780G SB700
AMD Phenom II X4 2.8 Ghz
Nvidia Geforce 8400GS 512 VRAM
SATA DVDRW
IDE HD
SATA HD

(try to install it on two discs, to see which works :))