InfiniteMac OSx86
Page 29 of 37 « First < 192728 29 3031 > Last »
Show 50 post(s) from this thread on one page

InfiniteMac OSx86 (http://infinitemac.com/forum.php)
-   Snow Leopard 10.6 (http://infinitemac.com/forumdisplay.php?f=87)
-   -   [How-To] Snow Leopard Retail (10A432) on P5K-E Wifi A/P -64 bit mode (http://infinitemac.com/showthread.php?t=3380)

lancelotu 11-15-2009 09:21 AM
Quote:
Originally Posted by VenimK (Post 39210)
when i create a DSDT.
i have several errors, i can 't seem to fix.

Intel ACPI Component Architecture
ASL Optimizing Compiler version 20080926 [Oct 4 2008]
Copyright (C) 2000 - 2008 Intel Corporation
Supports ACPI Specification Revision 3.0a

./dsdt_fixed.txt 9575: Method (VGET, 1, NotSerialized)
Warning 1087 - ^ Not all control paths return a value (VGET)

./dsdt_fix ........
Could anyone help me out here

Have you read post #240 ?

lukelovett 11-20-2009 04:59 AM
Stuck on an old 10.6.1 kernel!
 
Hi all, firstly, thanks to the OP. You have helped many!!

Can someone help me on my issue using Vanilla on P5k-e?

I have had a beautiful 10.6.1 installation until i updated to 10.6.2. Now i get an instant Kernel panic as soon as i select OSX in the Chameleon boot loader. I used Chameleon RC3.

What are other forum members using as the boot loader to boot into 10.6.2 (using Kernel Version 10.2.0)?

The only way i can get it to work is to use the 10.6.1 mach_kernel (version 10.0.0)

Thanks in advance

lancelotu 11-20-2009 05:14 AM
Quote:
Originally Posted by lukelovett (Post 39746)
Hi all, firstly, thanks to the OP. You have helped many!!

Can someone help me on my issue using Vanilla on P5k-e?

I have had a beautiful 10.6.1 installation until i updated to 10.6.2. Now i get an instant Kernel panic as soon as i select OSX in the Chameleon boot loader. I used Chameleon RC3.

What are other forum members using as the boot loader to boot into 10.6.2 (using Kernel Version 10.2.0)?

The only way i can get it to work is to use the 10.6.1 mach_kernel (version 10.0.0)

Thanks in advance
What graphic card ? Can you boot in -x32 ?

lukelovett 11-20-2009 12:31 PM
Hi Lancelotu

No, -x32 does not work. Evga GTS250

The only hint i do get is in the KP text, it makes a reference to dsmos. Any ideas?

fishcow 11-20-2009 03:45 PM
I updated to 10.6.2 and boot using Chameleon 2 R3.
I think you need fakesmc to get around dsmos issue


I had to remove sleepEnabler first.
Then I just made sure fakesmc, Disabler and NullCPUPowerManagement was in: /Extra/Extensions.
Also have the newer version of SleepEnabler

lukelovett 11-21-2009 09:36 AM
Thats it! I got rid of dsmos.kext and used fakesmc, and it booted! Thanks again!!

lidas 11-21-2009 05:54 PM
Wifi not work with snow 64 bit mode
 
I have a problem
Wifi not work with snow 64 bit mode
I have a mobo P%K-E WiFi
you have any solution thanks

fishcow 11-21-2009 11:14 PM
Quote:
Originally Posted by lidas (Post 39841)
I have a problem
Wifi not work with snow 64 bit mode
I have a mobo P%K-E WiFi
you have any solution thanks
AFAIK, there is no solution for Wifi 64 Bit for the built-in Realtek on the P5K-E.
Drivers and Utility application are 32 bit only.

lukelovett 11-22-2009 02:51 PM
Don't know if this has been mentioned, but Temp Sensors now work with the release of FakeSMC from Netkas (Great work! - all credit to Netkas!) I use istat menus to put the temps in the menu bar.

BTW, P5K-E is a great board for overclocking, so this is a very useful addition.

Lancelotu, maybe you can update the Kext Pack?

Snoc 11-23-2009 01:41 PM
Hi!

There are a new kext "OSXRestart.kext" by Master Chief that solved my restart after wakeup issues. If you try this you have to remove OpenHaltRestart.kext and EvOreboot.kext

Kind regards,
Snoc