InfiniteMac OSx86 - UHCI/EHCI Built in with dsdt fix

InfiniteMac OSx86 (http://infinitemac.com/forum.php)

- 10.X (http://infinitemac.com/forumdisplay.php?f=36)

- - UHCI/EHCI Built in with dsdt fix (http://infinitemac.com/showthread.php?t=3849)

[quote=Snow;32957]

Update: Got it! Name ADR strings were wrong for USB3 and US31. All ok now. Going to remove the code from boot.plist.

/QUOTE]

I forgot about that mine were the wrong way round too. Did you use windows Patcher02Beta5 to create your dsdt.aml?

Long time ago but I think so yeah.

Quote:

Originally Posted by wwbsox (Post 33008)

@mormegil

Are you using the sleepenabler.kext for snow leopard? Also required would be nullcpupowermanagement.kext as sleep enabler will conflict with powermanagement. I don't have the board you are using but I have read a lot of post from people that do, seems to be pretty good board for osx86.

Finally nailed it! It was my JMicron controller set to IDE instead AHCI :mad:

Yeah this board has been very compatible with OSX. It applies to all P45 boards I think. SATA and ethernet works out of the box. Sound works great by patching AppleHDA. Now I have suspend-to-ram :D

I have used ACPI Patcher in windows because it allows you to do more fixes. The names (USB3), (US31) are arbitrary, whats important is the address.

As I said in the original post:"pay attention to the usb device with address 0x001D0003, for me it was US31, dont edit this device."

On another note, Has anyone seen an IOATA kexts yet that works in 64bit? Would really like to disable AHCI mode in the bios.

Quote:

Originally Posted by wwbsox (Post 32832)

First the issues, than the fixes.

My usb1 (UHCI) and usb2 (EHCI) ports were showing up in system profiler as "expansion slots". This was causing 2 main problems for me. First, I had to use the power button to wake the computer from sleep. Second, if I had a usb drive plugged in when the computer went to sleep, I would get a "device removal error" when the computer woke from sleep.

I combined two different dsdt fixes I found. One fixed UHCI but not EHCI, the other did just the opposite.

I combined the dsdt fix for UHCI found here: http://www.insanelymac.com/forum/ind...c=168014&st=20

and the EHCI fix found here:
http://www.insanelymac.com/forum/ind...&#entry1240686

Now I can wake the computer from sleep by clicking my USB mouse and I dont have to eject USB drives before putting the computer to sleep. I also do not get the "controller will be unloaded across sleep" error when booting in verbose mode.

This works great on ep-35-ds3p, but should work for most ich9 and ich10 gigabyte boards, since device id's were changed to match ich10.

Also, pay attention to the usb device with address 0x001D0003, for me it was US31, dont edit this device.

Can I ask you to post your whole DSDT? I'm interested in how you're able to wake your computer via USB mouse.

Quote:

Originally Posted by kDawg (Post 33070)

Can I ask you to post your whole DSDT? I'm interested in how you're able to wake your computer via USB mouse.

You can find mine on page 1 of this thread, sleep from keyboard or mouse working

Quote:

Originally Posted by Ianxxx (Post 33072)

You can find mine on page 1 of this thread, sleep from keyboard or mouse working

That looks to just be the DSDT part for the USB/EHCI only. I have the same motherboard and I'm unable to wake from mouse or keyboard. There's either something different in your DSDT or in your BIOS settings that I'm missing. I'm wondering what it is.

Update: added my DSDT.aml to original post. Has the USB section edited, and the IDE1 section for the ICH10 device id's.

So, I'm also having the issue of not being able to wake via USB keyboard or mouse. All of my USB are listed as USB, with 1 or 2 being listed as High-Speed USB.

I'm not exactly sure how to go about enabling it...

Also, under Serial-ATA, my actual devices show, but it's blank where it should list the chipset (I.e. ICH10, 9, etc...) Is this a DSDT issue or kext issue?

please note that I'm not a noobie doobie (I've been installing it since deadmoo)...but I'm at a loss regarding this...

Please find my DSDT attached...

Specs
P31-DS3L (ICH7)
ALC 888
e7200 @3.42

Alright wwbsox, thx for the update on IDE1, I've got the devices listed as ICH10 now.
Could you tell me where the section for GFX is in your dsdt or tell me how to inject my own 8800GT code?
I'm not keen on using those patchers so I prefer the manual method.

Thx in advance lad.

Pre/Post ICH10 injection:

PRE
http://a.imagehost.org/0195/Schermaf...m_10_45_07.png

POST
http://a.imagehost.org/0687/Schermaf...m_10_45_23.png