|
is it anstinews.de block the free acct.?
I did had acct before when I down load 10.5.1, and now expired. I go and gave my email address and get the error like this: "erroranmelden". Does any one know what happend? Thanks alot |
You have to kindly request another user on this forum to enter your email address there. Your IP has already been logged in the astinews website, thus, it knows when you made an account. The # of accounts per each household, is one for each IP address. Too bad you can't renew that address since it all depends on the Internet Service Provider, lol. Ask someone through the Whisper Box. Choose random users. Someone ought to register you by simply registering your email address (a different one of course). Thats what I did yesterday. Check who is online right now, and whisper box them. You never know where you will get. Good luck, and let me know if you need any further assistance. ;-)
Quote:
|
thx Winlinmac01! you are a fastest helping man in this forum! I did not know that they keep track on ip. Do you think they also keep tracking on email address too?
By the way, how too using the whisper box ??? this is new for me hehehe |
Yes, according to what I experienced, they keep a track of email address too (you can always create a free email at any of your favorite email providers)
the whisper box is used when you want to PM (Forum language) someone. To use it, type the name of the user you want to send a message to (case-sensitive), and input your message. You should be receiving message later of course. To find out if you got a response, when you log in, you should be seeing the name of that user Last Active on the Whisper Box (that way you can find out if he/she responded to your inquiry). Quote:
|
Now I know whisper box = PM !!!!
Thx for that ! Now I'm going to find the way to change my wan IP by off/on the modem hope this works Quote:
|
Well, be aware its IP that your ISP registers to you, not your system, not your home network. Keep in mind that. =)
Quote:
|
Quote:
Is nobody else out there going to be kind enough to help seed? Thanx Steve |
Hello.
Where can I get a ppf (450.2 Mb) instead of full .iso image? Don't wanna wait downloading 2 days with my ISP =) |
Quote:
Quote:
"I plan to make a ppf in 2 or 3 weeks with other fixes, NatitX1300, the latest QuickTime and iTunes ... etc." |
Thank you so much for using Usenet(Takes about 30~40Min to download now for me :D)
Toobad you didn't upload the 8GB Version, I have some Dual Layer discs here EDIT: And why didn't you add PAR files, I hope it all goes fine but if only one rar misses a byte all the data can't be used unless there are par files |
If you were able to download all 71 files without a hitch, I doubt there should be any other problem(s). =)
Quote:
|
Quote:
Hmmm... Maybe its not so hard as I think to make ppf patch having both 10.5.2 AMD EFI rev.1 and 10.5.2 AMD EFI rev.2? =) |
Hopefully the PPF will address some of the issues other users are facing such as dual booting Mac & Windows.
Quote:
|
Forgive me if this has been answered already but I am a little confused on my options. I have rev. 1 installed runs great with a few minor (some unsolvable: PS/2 Keyboard) issues like my sata dvd drive and bluetooth recognizing my Microsoft optical desktop bluetooth keyboard. Will downloading and installing rev. 2 fix this or is there a method currently available for me to update 10.5.2 rev.1 to rev.2?
|
Quote:
luckily tough the RAR's where all fine |
Well, if all 71 files are extracted without a hitch, most likely there shouldn't be any problems.
Quote:
|
Could the SAM Multimedia error could be off a faulty dvd burn?
|
Yes. Try the slowest speed, such as 2x.
|
Anybody can help me?:
I have rev. 1 installed runs great with a few minor (some unsolvable: PS/2 Keyboard) issues like my sata dvd drive and bluetooth recognizing my Microsoft optical desktop bluetooth keyboard. Will downloading and installing rev. 2 fix this or is there a method currently available for me to update 10.5.2 rev.1 to rev.2? |
@minibuu, try a method similar to this: http://docs.info.apple.com/article.html?artnum=107586
|
I got a chance to test the keyboard out on a windows laptop. Something was wrong with the keyboard, but after dropping it a few times it works now. I am actually able to type with it and couldnt be more happy. Now on to my next issue....
What do you recommend for someone that has Rev. 1 installed that only needs sata support? And possibly sleep support. |
I have just installed Zephyroth leopard 10.5.2.rev2 and for the most part all went well except that when I was finished and before I get the desktop I get an error message about the RTL8187L.kext not loaded. The message is
System extensions cannot be used /System/Library/Extensions/ rtl8187.kext was not improperly installed. I changed the ownership and permissions on the extensions folder but that did not help. Has anyone seem this with their install? System Asus: M2N32-SLI Deluxe MB 2 gig DDR2 memeory 320 gig SATA HD In the mean time, I will reinstall ! |
bajanboy
you just need to use kext helper it is in the install now, find the kext and drag it into kext helper then type in you admin password, go advanced press permissions and script, note the script on the right (this is a kext install script with permissions) Then choose run. It will install and the permissions will be fixed Good Luck |
He must have done that, but did not specifically state that he did. bajanboy, have you tried using kext-helper to install the kext?
Quote:
|
He said
"I changed the ownership and permissions on the extensions folder but that did not help." This seemed like a wrong approch to me. he may not have used kext helper yet. And he was a bit quick to want to reinstall for a simple permissions issue. |
Quote:
Good luck! If you don't have sound try this: http://ifolder.ru/5581653 |
No, I have not used kext-helper, I used these command;
sudo chown -R 0:0 /System/Library/Extexsions/* sudo chmod -R 755/System/Library/Extexsions/* Actually there were two error boxes that popped it after the install (sorry no screen prints), one was complaining about the rtl8187l.kext not loaded properly loaded and the other was a security/permissions error on what I remember to be the /LibraryStartupItems directory. I re-installed without the RTL8187L driver an all is fine(no errors), I decided to use my D-Link DWL-G122 USB stick for my LAN but would rather have been using the WiFi on the MB.....will continue to investigate !! btw, the problem seem to be the driver client software that is loaded of the kext it self. |
Does the Zephyroth 10.5.2 Rev2 image include the drivers for the ATI SB600 southbridge chipset? I have an ASUS M2A-VM motherboard with the AMD 690G chipset and cannot get past the "waiting for root device" error. I've changed DVD drives, swapped master and slave drives (I have an IDE HD), to no avail. I've seen reference that the SB600 drivers have been posted on this forum and am willing to try to build my own bootable image with these drivers, but I wanted to know whether Zephyroth already incorporated these drivers in this Rev2 image.
|
No luck for me, "Still waiting for root device", hehehehe. I know it may be of my Nforce 560 chipsets. I so tire with editting the AppleNForceATA.kext and inject again to iso image and burn, boot again because the latest kext was issue a message is does not support for my device 0x56010de.
Solution: WAIT FOR A NEW RELEASE OF SUPPORTING KEXT/S. I know that hihihihi Good luck for those still trying to make it work. |
Assuming that the Zephyrod 10.5.2 Rev2 image does NOT have the SB600 southbridge patch, how do I go about making a new iso image with the patch applied? I don't have a working OSX machine right now, so would have to patch the iso using linux (or windows). I've seen some instructions on how to update the iso, but they all require a working mac. Is it simply a matter of updating the Extensions directory on the install dvd with the new contents of the SB600_SATA_ATA.zip archive? Or is there more to it than that?
|
Just installed Zephyrod 10.5.2 Rev2 and it was first success after Tiger for me, rev1 hangs during installation. The installation though didn't run well from normal mode(frozen 39 min left) and went fine only under -x. I've got few issues now. Can boot only with -f(same on Tiger), graphic card doesn't support CI/QE(works on Tiger with same NVinject 0.2.0),DVD not reading, Itunes not playing from Ipod or CD,Lan not working(didn't install any 3rd party drvrs),no sound. Looks funny. What is working then? Any advice appreciated. Thanks
And my complex spec: Hp XW9300 Tyan K8WE mobo(Nforce4) with havily modified Bios 2.09 from Hp, 2xOpteron 252(2.6 Hgz) SSE3 support 4gb DDR 3200ram, Nvidia Qadro 3400, Seagate sata 320gb |
Give your specs to Zephyroth and he should be able to do something about it.
Quote:
|
I'm novice on the forum. How can I do it? Thanks
|
do what?
Quote:
|
Wow... Zephyroth 10.5.2 r2 is the FIRST (only) Leopard AMD dist. that will actually get to the OS X Installer on my Compaq V2312us laptop!
I still don't know if the Installer will be successful, but this is a HUGE step for this hardware! Pretty cool. Only way to even try my lappy before was via external HD. If this comes close, I may have to try "Hack4lies - err - life"s ATi 200M .kexts... (heaven forbid!) |
Glad to hear its working now cgsheen. Pretty soon the whole AMD planet / hardware will be support. :DD
Quote:
|
Could you tell me please how can I send specs to Zephyroth and contact other members as I can't find those options. Many thanks
|
you could try using whisper box
|
Is this the full image, I was under the impresssion Zeph was going to upload a package so you could patch the previous ISO.
Did this happen and where can I get it? I dont want to have to download another 4 GB ISO! Thanks |
You can Wispher me, thats all. Or email email with the address found at the binsearch.info results.
Quote:
|
The patch exceeded 4gigs, therefore he decided to come up with a new release instead and slipstream. =)
Quote:
|
My installer fails. It worked with Rev 1.
Mar 14 13:44:07 localhost OSInstaller[152]: Processing NTFS-3G: Mar 14 13:44:07 localhost OSInstaller[152]: Determining files to install Mar 14 13:44:07 localhost OSInstaller[152]: It took 0.01 seconds to create the install plan for NTFS-3G. Mar 14 13:44:07 localhost OSInstaller[152]: Configuring deferred files Mar 14 13:44:07 localhost OSInstaller[152]: Assembling temporary receipt Mar 14 13:44:07 localhost OSInstaller[152]: Performing pre-extraction actions Mar 14 13:44:07 localhost OSInstaller[152]: Creating destination path Mar 14 13:44:07 localhost OSInstaller[152]: Validating package payload Mar 14 13:44:07 localhost OSInstaller[152]: Starting file extraction Mar 14 13:44:07 localhost pkgExtractor[374]: Extracting... Mar 14 13:44:08 localhost pkgExtractor[374]: 155 of 155 files written in 0.21 seconds. Mar 14 13:44:08 localhost pkgExtractor[374]: 5816 kilobytes installed at 26.7 MB/s. Mar 14 13:44:08 localhost OSInstaller[152]: Performing post-extraction actions Mar 14 13:44:08 localhost OSInstaller[152]: Finishing receipt Mar 14 13:44:08 localhost OSInstaller[152]: Processing FixGUID: Mar 14 13:44:08 localhost OSInstaller[152]: Determining files to install Mar 14 13:44:08 localhost Unknown[67]: 2008-03-14 13:44:08.255 Mac OS X Installer[152:7713] *** Assertion failure in -[IFInstallPlan setValue:forAttribute:], /SourceCache/Install/Install-378/source/engine/helpers/IFInstallPlan.m:301 Mar 14 13:44:08 localhost OSInstaller[152]: An exception was thrown from the install queue while running IFInstallElement. NSInternalInconsistencyException. Invalid parameter not satisfying: value != nil. Mar 14 13:44:08 localhost OSInstaller[152]: Install failed: The Installer encountered an unknown error that failed the install. Contact the software manufacturer for assistance. Mar 14 13:44:08 localhost OSInstaller[152]: Memory statistics for 'Install Failed' pane: Mar 14 13:44:08 localhost OSInstaller[152]: Physical Memory Allocation: 503 MB wired, 123 MB trapped, 88 MB active, 461 MB inactive, 2921 MB free, 3470 MB usable, 4096 MB total Mar 15 05:54:25 localhost Unknown[67]: 2008-03-15 05:54 Mac OS X Installer[152] (CarbonCore.framework) FSEventStreamStart: ERROR: FSEvents_connect() => Unknown service name (1102) Mar 15 05:54:28 localhost OSInstaller[152]: installAutoFSMonitor: open failed Any ideas just by looking at it? |
can anyone tell were to download rev2 from torrents
|
Search the forums, please. Oh...you can most likely find it through the bay, or tinyurl.com, its floating around. Be warned that the speeds are incredibly slower in torrents than Newsgroups. =)
Quote:
|
Quote:
The rev.1 works, but programms are often crashing! Install.log: Mac OS X Installer[149:7817] *** Assertion failure in -[IFInstallPlan setValue:forAttribute:], /SourceCache/Install/Install-378/source/engine/helpers/IFInstallPlan.m:301 Mar 17 15:05:24 localhost OSInstaller[149]: An exception was thrown from the install queue while running IFInstallElement. NSInternalInconsistencyException. Invalid parameter not satisfying: value != nil. Mar 17 15:05:24 localhost OSInstaller[149]: Install failed: Die Installation ist aufgrund eines unbekannten Fehlers fehlgeschlagen. Wenden Sie sich an den Hersteller. Mar 17 15:05:26 localhost OSInstaller[149]: Memory statistics for 'Installation ist fehlgeschlagen' pane: Mar 17 15:05:26 localhost OSInstaller[149]: Physical Memory Allocation: 107 MB wired, 3 MB trapped, 236 MB active, 80 MB inactive, 598 MB free, 914 MB usable, 1024 MB total Mar 17 15:05:49 localhost Unknown[68]: 2008-03-17 15:05 Mac OS X Installer[149] (CarbonCore.framework) FSEventStreamStart: ERROR: FSEvents_connect() => Unknown service name (1102) Mar 17 15:05:59 localhost OSInstaller[149]: installAutoFSMonitor: open failed My hardware: CPU: AMD Athlon 64 3500+ Motherboard: DFI Lanparty Ultra-D (Nfroce 4) Graphic: EVGA Nvidia 7900GT HD: Samsung Spinpoint 1614C (SATA) |