InfiniteMac OSx86
Page 39 of 48 « First < 293738 39 4041 > Last »
Show 50 post(s) from this thread on one page

InfiniteMac OSx86 (http://infinitemac.com/forum.php)
-   Snow Leopard 10.6 (http://infinitemac.com/forumdisplay.php?f=87)
-   -   [GUIDE] EVGA X58 Snow Leopard Mac OS X 10.6.6 (10J567) Installation (http://infinitemac.com/showthread.php?t=3854)

JaE-V 03-24-2011 04:22 AM
Any known issues with 10.6.7 update guys?

emenelton 03-24-2011 03:24 PM
X58 Micro
 
I have SL 10.6.6 working now with Jae-v and msinfo's p.24 method.

- EVGA x58 Micro/i7950 -
Idle temps are: 38/33/37/33
Geekbench 32: 9587

Network and Audio good Sleep disabled
GFX String Yes

I hope if any one has questions about this board that I can help. I appreciate the work others did and would like to give back.

emenelton

emenelton 03-25-2011 11:47 PM
I updated my EVGA X58 Micro to 10.6.7 and had no issues.

emenelton 03-26-2011 12:44 AM
If any kind Hackintosh guru could look at my comsole log.This is what happens to my computer after coming out of sleep. If I don't use sleep I am pretty good. This is not related to the 10.6.7 update. Any suggestions are much appreciated.

I apologize if I'm not posting this info correctly.

3/25/11 6:32:57 PM kernel FakeSMC: key info not found CLWK, length - 6
3/25/11 6:32:57 PM configd[14] network configuration changed.
3/25/11 6:32:58 PM kernel System Sleep
3/25/11 6:33:02 PM configd[14] arp_client_transmit(en0) failed, Network is down (50)
3/25/11 6:33:02 PM configd[14] bootp_session_transmit: bpf_write(en0) failed: Network is down (50)
3/25/11 6:33:02 PM configd[14] DHCP en0: INIT-REBOOT transmit failed
3/25/11 6:33:02 PM configd[14] DHCP en0: ARP detect ROUTER failed, arp_client_transmit(en0) failed, Network is down (50)
3/25/11 6:33:02 PM kernel Wake reason = USB4
3/25/11 6:33:02 PM kernel System Wake
3/25/11 6:33:02 PM kernel FakeSMC: key info not found CLWK, length - 6
3/25/11 6:33:02 PM kernel Previous Sleep Cause: 0
3/25/11 6:33:02 PM kernel FakeSMC: key info not found CLWK, length - 6
3/25/11 6:33:02 PM kernel USBF: 123.817 USB (EHCI):Port 1 on bus 0xfa - connect status changed but still enabled. clearing enable bit: portSC(0xffffffff)
3/25/11 6:33:02 PM kernel USBF: 123.817 USB (EHCI):Port 2 on bus 0xfa - connect status changed but still enabled. clearing enable bit: portSC(0xffffffff)
3/25/11 6:33:02 PM kernel USBF: 123.817 USB (EHCI):Port 3 on bus 0xfa - connect status changed but still enabled. clearing enable bit: portSC(0xffffffff)
3/25/11 6:33:02 PM kernel USBF: 123.817 USB (EHCI):Port 4 on bus 0xfa - connect status changed but still enabled. clearing enable bit: portSC(0xffffffff)
3/25/11 6:33:02 PM kernel USBF: 123.817 USB (EHCI):Port 5 on bus 0xfa - connect status changed but still enabled. clearing enable bit: portSC(0xffffffff)
3/25/11 6:33:02 PM kernel USBF: 123.817 USB (EHCI):Port 6 on bus 0xfa - connect status changed but still enabled. clearing enable bit: portSC(0xffffffff)
3/25/11 6:33:02 PM kernel USBF: 123.817 USB (EHCI):Port 1 on bus 0xfd - connect status changed but still enabled. clearing enable bit: portSC(0xffffffff)
3/25/11 6:33:02 PM kernel USBF: 123.818 USB (EHCI):Port 2 on bus 0xfd - connect status changed but still enabled. clearing enable bit: portSC(0xffffffff)
3/25/11 6:33:02 PM kernel USBF: 123.818 USB (EHCI):Port 3 on bus 0xfd - connect status changed but still enabled. clearing enable bit: portSC(0xffffffff)
3/25/11 6:33:02 PM kernel USBF: 123.818 USB (EHCI):Port 4 on bus 0xfd - connect status changed but still enabled. clearing enable bit: portSC(0xffffffff)
3/25/11 6:33:02 PM kernel USBF: 123.818 USB (EHCI):Port 5 on bus 0xfd - connect status changed but still enabled. clearing enable bit: portSC(0xffffffff)
3/25/11 6:33:02 PM kernel USBF: 123.818 USB (EHCI):Port 6 on bus 0xfd - connect status changed but still enabled. clearing enable bit: portSC(0xffffffff)
3/25/11 6:33:07 PM kernel FireWire GUID 0000000000000000 is invalid!
3/25/11 6:33:10 PM configd[14] network configuration changed.
3/25/11 6:33:10 PM configd[14] network configuration changed.
3/25/11 6:33:12 PM kernel FireWire GUID 0000000000000000 is invalid!
3/25/11 6:33:17 PM kernel FireWire GUID 0000000000000000 is invalid!
3/25/11 6:33:22 PM kernel FireWire GUID 0000000000000000 is invalid!
3/25/11 6:33:27 PM kernel FireWire GUID 0000000000000000 is invalid!
3/25/11 6:33:32 PM kernel FireWire GUID 0000000000000000 is invalid!
3/25/11 6:33:37 PM kernel FireWire GUID 0000000000000000 is invalid!
3/25/11 6:33:42 PM kernel FireWire GUID 0000000000000000 is invalid!
3/25/11 6:33:47 PM kernel FireWire GUID 0000000000000000 is invalid!
3/25/11 6:33:52 PM kernel FireWire GUID 0000000000000000 is invalid!
3/25/11 6:33:57 PM kernel FireWire GUID 0000000000000000 is invalid!
3/25/11 6:34:02 PM kernel FireWire GUID 0000000000000000 is invalid!
3/25/11 6:34:07 PM kernel FireWire GUID 0000000000000000 is invalid!
3/25/11 6:34:12 PM kernel FireWire GUID 0000000000000000 is invalid!
3/25/11 6:34:17 PM kernel FireWire GUID 0000000000000000 is invalid!

xxxslayeriiixxx 04-02-2011 12:09 AM
10.6.7 Update is safe. just had to reinstall my graphics driver for gtx480.

cpress 04-02-2011 01:20 AM
Quote:
Originally Posted by mm2311 (Post 53174)
Looks like I resolved it. Just in case your Finder is freezing.

Disable any NTFS drives from automounting.

I had two read/write entries I set in my etc/fstab file to allow for me to write to my Windows 7 drive and my NTFS USB flash drive.

UUID="your hard drive" none ntfs rw,noauto
After the rw, I added the noauto, so that the drives do not mount in FINDER on boot.

Everythings seems to be running smooth now, without applications or Finder freezing.

Let me know if anyone else has had this issue. I went Crazy trying everything else with BIOS settings and kexts.
I've been having these issues as well. Looks like your fix worked for me. It seems that I cannot have my Windows volume mounted. I can mount my ntfs storage volume, just not the windows................

Thanks for the tip!

xxxslayeriiixxx 04-02-2011 03:00 AM
Did anyone try Lion yet?

JaE-V 04-16-2011 12:34 PM
Quote:
Originally Posted by xxxslayeriiixxx (Post 53499)
Did anyone try Lion yet?
i've just been waiting til it goes final and doing my reading...should be fairly easy i'm assuming. You?

airwalk776 04-21-2011 10:15 PM
Quote:
Originally Posted by JaE-V (Post 53698)
i've just been waiting til it goes final and doing my reading...should be fairly easy i'm assuming. You?
Just downloaded it last weekend and attempted to do a fresh install on a usb drive and book and double fault KP right away. seems to be that Lion does not use any kind of mkext rather it uses whats known as kernalcache file. Next step is going to be get a working install on my Macbook pro then install boot loader and kext on that drive and try it with the evga machine. Ill keep you posted.

airwalk776 05-06-2011 01:51 AM
ok finally got around to installing Lion, good news is that it runs just fine with the name Extra folder from snow leopard and same dsdt. Bad news audio doesnt work out of the box. Have to edit legacy889hda or use the applehda.kext from snow leopard.

FYI.. use chameleon 755 boot loader