Yes i know, all my mistakes come from that i havent running Mac, only Windows : /

Tommorow i download iDeneb and say whats next

See if you can get started with iDeneb, if it works then we can quickly get you to retail Leo or SL

Okay, I finished flashing my mobo, i used .rom from this site: http://www.osxcores.site50.net/product-1.htm ( (MS)-7514v14 *P45 Neo3-F *P43 Neo3-F/FR)
and whats next?


Edit:
Ach, i forgot.
I downloaded iDeneb 1.4, but after when i type commands (for example -v -f etc) screen freeze on this:
http://img5.imagebanana.com/img/7bczdc1/IMG_4648.jpg

Ok, start by telling me what hardware you have. If you don't have IDE drives you should disable that JMicron controller in bios.

MSI 7514
Chipset P43/ICH10R
HDD+DVD on Sata
ALC 888
C2D e7500
Palit GTS 250
Patriot 2x2gb cl5

and i disabled JMicron controller at moment

Ok, I don't know how much there is differences in our bios settings because of different models, but let's try these:
Execute bit supprt enabled
Set limit CPUID... disabled

HPET enabled

IOAPIC function enabled

Extra IDE controller disabled

PCI IDE Busmaster enabled
On chip Sata controller enabled
Raid mode AHCI

ACPI Function enabled
ACPI Standby State S3

Intel EIST enabled
Intel C/State tech enabled

I think you should find most of these settings in your bios. Last two may have to be disabled when using a distro, they enable native P-states and C-states and if your distro has Nullcpupowermanagement.kext that may cause conflicts. Try booting iDeneb again with these settings.

All without this, is in my bios ;)

All I set up right and this is works ! - Instalator of Mac is running, and windows 7 have bsod but thats no problem :D
But. After installation iDeneb freeze on this:
http://img5.imagebanana.com/img/r6sx9r3v/IMG_4650.jpg
btw, which options choose in instalation? (chipset, fixes etc)

And retail of leo with boot132 freeze on this:
http://img5.imagebanana.com/img/c2m7lbt2/IMG_4651.jpg

It's been so long since I used a distro that I can't remember all the options anymore, if you provide a list of options I may be able to help. And I don't know what all you have on your bootcd, bit hard to help without that information.

Ok, all options:
http://img5.imagebanana.com/img/ba8gxwui/1.jpg
http://img5.imagebanana.com/img/ql8bobcl/2.jpg
http://img5.imagebanana.com/img/638s28t/3.jpg
http://img5.imagebanana.com/img/e9rrcl/4.jpg
http://img5.imagebanana.com/img/d9dx9xr1/5.jpg
http://img5.imagebanana.com/img/z7zz36g/6.jpg
http://img5.imagebanana.com/img/b7ksb14m/7.jpg
http://img5.imagebanana.com/img/u28wkta0/8.jpg
http://img5.imagebanana.com/img/1mzf0ag4/9.jpg

Ok, let's try these:
1. Essential system
2. ALC888 by Taruga (not sure about this since I use usb audio)
3. ICHx Fixed
4. Use vanilla kernel so no choices there.
5. Realtek R1000
6. Openhaltrestart and some bios from AppleSMBIOS submenu
7. No choices there
8. You have such a new graphics card that I don't know if any of these work, try choosing NVInject that matches with memory on graphics card.
9. No need to select anything there.

Good luck