InfiniteMac OSx86 - Qoopz AnV xnu 10.4.0 Rel4

InfiniteMac OSx86 (http://infinitemac.com/forum.php)

- 10.X (http://infinitemac.com/forumdisplay.php?f=36)

- - Qoopz AnV xnu 10.4.0 Rel4 (http://infinitemac.com/showthread.php?t=6491)

Quote:

Originally Posted by RayFlower (Post 50314)

An on other news i noticed some new(to me) errors in some software i have:

http://img101.imageshack.us/img101/1888/aics5.png

and

http://img824.imageshack.us/img824/9525/pscs3.png

They don't have any backtraces...
It's too bad as I can't find what is causing the issue this way (damn, too bad).
It's also too bad I don't have an AMD around so I could test it myself.
I'll continue the work though ;)

I'm seeing a nice boost in 64bit mode. In 32bit mode I got 3230 in Geekbench. In 64bit mode I got 3755. In Windows 7 64bit, however, I got 3154 which is a bit surprising since that's the OS that's actually suppose to run on this computer.

I still get "TSC: Frequency = 0.0000MHz" for my Pentium D 2.8Ghz (with busratio set in boo plist), but otherwise everything seems to work.

how strange that almost everyone except me got better running system with 32+64... im jump back to 32bit only, and damn how much faster it is.... :'(

I tried again with a fresh install of 10.6.0 with this 10.4.0 Rel4 kernel, Chameleon RC5 prerelease 18 Build_112 bootloader, fixed DSDT and smbios, nForceATA, nForceLAN, NullCPUPowerManagement and FakeSMC kexts on a machine with AMD Athlon64 3200+, nForce4 chipset. It boots and plays the Welcome movie but after the Welcome screen appears it gives me the attached kernel panic. Does anyone know what this means? (Actually it's the same kernel panic I've reported already in post#17 but now it always happens after boot on a clean install.) Some messages from kernel.log that may be interesting:

Code:

Aug 28 06:38:49 localhost kernel[0]: npvhash=4095

Aug 28 06:38:49 localhost kernel[0]: PAE enabled

Aug 28 06:38:49 localhost kernel[0]: rtclock_init: Taking bus ratio path 1 (AMD Athlon)

Aug 28 06:38:49 localhost kernel[0]: TSC: Reported FSB:    0.0000MHz, corrected FSB:  201.31872MHz

Aug 28 06:38:49 localhost kernel[0]: TSC: Verification of clock speed failed. Fallback correction was performed. Please upgrade bootloader.

Aug 28 06:38:49 localhost kernel[0]: TSC: Frequency =   2010.318720MHz, FSB frequency =  201.31872MHz, bus ratio = 10

Aug 28 06:38:49 localhost kernel[0]: Darwin Kernel Version 10.4.0: ma 16 aug 2010 23:01:41 CEST; anappirtrvhAnV

Aug 28 06:38:49 localhost kernel[0]: vm_page_bootstrap: 250788 free pages and 11356 wired pages

Aug 28 06:38:49 localhost kernel[0]: standard timeslicing quantum is 10000 us

Aug 28 06:38:49 localhost kernel[0]: mig_table_max_displ = 73

Aug 28 06:38:49 localhost kernel[0]: Local APIC version 0x10, 0x14 or more expected

.

.

.

Aug 28 06:38:49 localhost kernel[0]: HPET: probeHPET() failed

Aug 28 06:38:49 localhost kernel[0]: FakeSMC: Opensource SMC device emulator by netkas (C) 2009

Aug 28 06:38:49 localhost kernel[0]: FakeSMC: Monitoring plugins support by mozodojo (C) 2010

Aug 28 06:38:49 localhost kernel[0]: FakeSMC: Original idea of plugins and code sample by usr-sse2 (C) 2010

Aug 28 06:38:49 localhost kernel[0]: AppleNForceATA: sata phy reset done.

.

.

.

Aug 28 06:39:49 localhost kernel[0]: nForceLAN: found nVidia CK804 Ethernet Controller device 10de:0057 with flags 0x0008021e

Aug 28 06:39:49 localhost kernel[0]: nForceLAN: Version 0.64.5 starting

Aug 28 06:39:51 localhost kernel[0]: SMCITEController: Found ITE IT8712F Super I/O chip

Aug 28 06:39:51 localhost kernel[0]: DSMOS has arrived

Aug 28 06:39:51 localhost kernel[0]: PTKawainVi: started

Aug 28 06:39:51 localhost kernel[0]: Vendor ID: 10de, Device ID: 392

Aug 28 06:39:51 localhost kernel[0]: Architecture: 8000

Aug 28 06:39:51 localhost kernel[0]: G73 [GeForce 7600 GS]

Aug 28 06:39:51 localhost kernel[0]: BIOS successfully read

Update: I've narrowed it down to the GraphicsEnabler bootloader option. It does not panic if I don't use it (but then QE/CI does not work either). I could get through the initial configuration without GraphicsEnabler but I have the same graphics problems I have asked about previously and booting with GraphicsEnabler=y gets this KP. The same system works well with 10.5.6 with efistring but I cannot use that in 10.6 because Chameleon 2 ignores my com.apple.Boot.plist. (Maybe it's confused by two HDDs with 3 HFS+ partitions on them? Does anyone know how to get debug messages from Chameleon?)

use bootflag: patcher_opts=2

I have a small problem with some .mov and .mp4 files. The QuickLookHelper is quitting.

Code:

2010.08.28. 17:07:31        ReportCrash[1985]        Failed to create CSSymbolicatorRef for quicklookd

2010.08.28. 17:07:31        com.apple.launchd.peruser.503[1681]        (com.apple.quicklook[1984]) Job appears to have crashed: Illegal instruction

2010.08.28. 17:07:31        com.apple.launchd.peruser.503[1681]        (com.apple.quicklook) Throttling respawn: Will start in 1 seconds

2010.08.28. 17:07:31        ReportCrash[1985]        Saved crash report for quicklookd[1984] version 2.2 (327.4) to /Users/diskeeper/Library/Logs/DiagnosticReports/quicklookd_2010-08-28-170731_diskeeper-Mac-Pro.crash

2010.08.28. 17:07:32        ReportCrash[1985]        Failed to create CSSymbolicatorRef for quicklookd

2010.08.28. 17:07:32        com.apple.launchd.peruser.503[1681]        (com.apple.quicklook[1987]) Job appears to have crashed: Illegal instruction

2010.08.28. 17:07:32        com.apple.launchd.peruser.503[1681]        (com.apple.quicklook) Throttling respawn: Will start in 1 seconds

2010.08.28. 17:07:32        ReportCrash[1985]        Saved crash report for quicklookd[1987] version 2.2 (327.4) to /Users/diskeeper/Library/Logs/DiagnosticReports/quicklookd_2010-08-28-170732_diskeeper-Mac-Pro.crash

2010.08.28. 17:07:32        Finder[1687]        [QL] quicklookd unexpectedly quitted while thumbnailing file://localhost/Volumes/MAC%20DATA/64bitAMD.mov

Quote:

Originally Posted by diskeeper (Post 50359)

use bootflag: patcher_opts=2

Of course I'm using patcher_opts=2 (and also arch=i386) otherwise it would not boot at all. With these options it boots, but get a KP after the welcome movie. I've also tried with legacy_kernel-10.4.0 but it also panics at the same place.

Quote:

Originally Posted by diskeeper (Post 50360)

I have a small problem with some .mov and .mp4 files. The QuickLookHelper is quitting.

QuickLookHelper is known to be problematic even on real Macs. Try searching for it and see for yourself. So this might not be related to this kernel but could be.

Quote:

Originally Posted by andyvand (Post 50339)

Is there anyway i could make it a bit more verbose? i looked trough all my logs and I didn't find any more info about the crashes there I'm afraid.
Also I should add, the cs3 photoshop crash occurred when i tried to "save as.." while the crash in Illustrator cs5 occurred when I opened the app, I'll try to see if i can find more info about it.

Edit:

While opening PSCS3 in the terminal it got:

Code:

CoreEndianFlipData: error -4940 returned for rsrc type DITL (id 3432, length 568, native = no)

SysBreakStr: An unexpected and unrecoverable problem has occurred (primary). Exiting.

Abort trap

And with ILCS5:

Code:

./Adobe\ Illustrator 

CoreEndianFlipData: error -4940 returned for rsrc type DITL (id 10026, length 696, native = no)

SystemFlippers: didn't consume all data for DITL ID 10000 (pBase = 0x7256320, p = 0x725647d, pEnd = 0x725648c)



CoreEndianFlipData: error -4940 returned for rsrc type DITL (id 10035, length 576, native = no)

SystemFlippers: didn't consume all data for DITL ID 10033 (pBase = 0x1debb430, p = 0x1debb5c9, pEnd = 0x1debb5e8)



SystemFlippers: didn't consume all data for DITL ID 12500 (pBase = 0x2883eb30, p = 0x2883ec79, pEnd = 0x2883ec80)



Bus error

The crash reporter adobe uses also leaves no backtrace so I guess that doesn't help much.