naquaada, had you tried decreasing the HT?...if i have it in 5x it wont start! 4x or lower works fine.

Anyway, atm im trying to update tiger to 10.4.11 ! IF i success ill try and see how it works there :p

I've set HT to 5x. No problems since then.

I meant the overclock! lol....:p

I have overclocked my computer to 2,86, so the bus freuency is 220 MHz * 13 for the multiplicator. HT frequency is 1100 MHz, 220 MHz (bus frequency) x5 (manual setting). RAM is not overclocked and the cpu core voltage is reduced to about 1.325 Volts.

With these settings my system is absolutely stable, but i never had any problems yet.

OH , ok so you underclock memory and overclock cpu, something like this :S ?? :

underclock ram to 360mhz

overclock cpu to 2.6 and the ram is ""overclocked"" to 400mhz...


yes? lol...anyway...im still trying to install 10.4.11 to amd, its amazing that theres anything about it!

no, RAM is standard @ 400 MHz

why do you try to install Tiger, does Leopard not work?

Well, we have the mouse bug, and the -10080 errors or w/e. But i want to at least have the latest tiger version working.

With 10.4.9 i have no issues with mouse, not even when stressing the hard drive or w/e.

Success! 10.4.11 runs fine....and i dont have the dual core problems (ATM) Ill let it powered and see how it goes. Only the system profiler crash.

Some observations after I removed my Kingston DDR400 kit and replaced it with a OCZ one.
Earlier I was running a OCZ kit (2 x 512mb) and the Kingston (2 x 512mb) in dual channel.
Now I'm running four OCZ modules in dual channel (2 x 512mb and 2 x 1gb) and set them at CL3 (CL2 is default).

Didn't use any flags at boot. System is running fine after 28 hours. No Mouse bug, no 10080 errors so far. Will report back once if I get them later (hopefully not).

Interesting! I have 4x Samsung RAM in my board, two bundles with 2x1 GB. I also want to remember: Check your boards if the RAM modules are placed in the correct sockets. Today's mainboards are very sensible in that. I have these bundles with two modules each:

2 GB Kingston HyperXX 2GB 400 MHz
2 GB Corsair XMS 4000 500 MHz (running @ 400 MHz)
1 GB GEIL GLX1GB4400DC 550 Mz (running @ 400 MHz)
2 GB Samsung 2 GB 400 MHz (bought in 2005)
2 GB Samsung 2 GB 400 MHz (bought in 2008)
2 GB Samsung 2 GB 333 MHz (bought in 2008, should be 400 Mhz but only works in 333)
1 GB No-Name RAM 400 MHz

I can only combine the GEIL and the Corsair RAM modules and the two Samsung 400 MHz modules, no other combinations work. Has anyone of the guys who have the mouse problem tried to use Single-Channel instead of Dual-Channel RAM?