Ok so my 10.5.7 on AMD has Two Slight bugs. Please Help.
 

Im working on one of the bugs now which is the fact that my iPod is no longer mounting and neither are my DMG's but EVERYTHING works so far LOL.

I am currently using pacifist to extraxt the IOUSBMassStorageClass kext from my hackint0sh leopard DVD and I am Hoping that will fix the iPod issue but I have a feeling it wont :(, i geuss we will see.

I have reinstalled the seatbelt.kext but that did not help. If anyone has any suggestions please PM me.

This isnt THAT big of a deal so i want to lay off with my planned "Archive & Install" for just a bit longer

Success on a Intel DP43TF, iPC 10.5.6 --> 10.5.7
 

10.5.7 update working well from iPC 10.5.6 initial Vanilla install

Hardware:
Intel DP43TF, Q9550S Core 2 Quad, 6GB DDR2-800
XFX GF 8600GT 256MB, HP SATA DVD, Western Digital Caviar SATA drives

10.5.6 install required:
-EFI Studio applied boot string for GF 8600GT (QE/CI/QGL all working)
-ICH10 storage kext selected on install
-Intel 82566 ethernet kext selected on install
-SMBIOSResolver selected on install
-Patched USB Drivers selected on install
-Required a kext from www.kexts.com to support the ALC888vc audio codec
-Had to disable AppleUpstreamUserClient.kext to fix the jumpy mouse/stuttering Quicktime video bug.

After 10.5.7 update (By downloading the Delta update, not by Software update), some things improved:
-No change required to EFI boot string for GF 8600GT- continued working as before
-ICH10 storage kext no longer needed!
-Did not need to reapply Intel 82566 ethernet kext (not overwritten or now has native support, unsure which)
-Did not need to reapply SMBIOSResolver (expected since it leaves vanilla untouched?)
-ALC888vc kext from www.kexts.com no longer needed!
-Did have to reapply Patched USB drivers from iPC 10.5.6, otherwise external USB drives failed to connect
-STILL had to disable the AppleUpstreamUserClient.kext. Jumpy mouse/Quicktime video problem came back immediately after 10.5.7 booted.

In 10.5.7 just as in 10.5.6, Sleep does not work for me. System either turns off or a message pops up telling me to turn it off (and in 5 different languages, too). Disappointing since this board is on the HCL on wiki.osx86project.org as everything working, including sleep. But I can live without that feature.

Could you send me this kexts by mail, i will pm u my email address.

I upgraded to 10.5.7 from apple update, then not restart and install AnV_XNU_9.6.0_kernel_V1.4... a couple of reboots and system is working.
Only problem, audio disappeared and in system profiler an error on hardware summary.
Reinstalled Taruga's rev3 drivers and an applesmbios kext.
Now it seems to be all ok...
My system is seen as a MacBookPro5,1... is it a problem? must i look for something else wrong?
I'm on a backup's disk system cloned from the one i normally use...
Can i safely upgrade it in this way?

lets say I wanted to update from 10.5.5 to 10.5.7. Should I expect to run into many problems?

Update to my previous post,

This is NOT true : "-ALC888vc kext from www.kexts.com no longer needed"

Turns out it is still needed. And though it works without doing so, I still disabled AppleHDA.kext as per the instructions for that kext.

And I had to remove JMicronATA.kext. It was present from my initial 10.5.6 setup, but no longer needed unless I also wanted ATA support, but this rig is all SATA.

update whent great but there were a few things not working dmg files would not mount , fixed that with the seatbelt fix. but still have not found a solution for my iphone it just will not mount it even wont charge, i can see that its pluged in to the usb system but its not reconiced

iPhone won't mount..
 

Hey Candycane !! Ik kom jou ook overal tegen.. :) !! Have you tried after plugging in your iPhone, trigger the last option of the tool: OSx86 Tools.. I mean the option 'touch extensions folder'.. I had similar problems in the past by a friend of mine... After 'touching extensions folder' and a moment of waiting... his iPhone appeared on his Hackintosh.. If this don't work.. you may have to use the USB prober tool from 'Developer tools' first.. If you start this tool, it claims that not all USB drivers are installed, it asks you to do that.. Do it.. Try after that, again 'touch extensions folder' .... And cross your fingers...I don't say this works on all Hackintoshes.. But it's worth a try !! The only downside of this possible solution is that is has to been done every time you restart.. (I mean the 'touch extensions folder' option only ...)

I just installed 10.5.7 and it works for the most part. My wireless card still cuts out and I have no sound ATM but I can survive. It seems seatbelt.kext isn't needed anymore for mounting dmgs, it actually CAUSED a kernel panic. I backed it up and removed it, rebooted and dmgs mount perfectly fine now.

The only thing I'm hoping won't cause problems is that system info shows my CPU as a 200MHz unknown, I have an Intel C2Q Q6600. I'm not sure why it's not reading it right but it doesn't seem to slow down the system at all. Appears to be running at full speed.

help on update
 

hey guys im new here and if i could get some help it would be awsome this is my systemDarwin phillip-manwarrens-system-product-name.local 9.7.0 Darwin Kernel Version 9.7.0: Tue Mar 31 22:52:17 PDT 2009; root:xnu-1228.12.14~1/RELEASE_I386 i386 i would like to know if there is a way to get this updated to to 5.8 please help