hello

I am sorry for my English
I have HP (Pavilion dv6240eu) and I can`t format disc
so I installed on disc USB maxtor 200gb, it pretended to install
but during it starting it moves only -x
Do You alredy Own a Mac? I press continue and it freeze (always lan cabel off)
I installed five times, always the same effect !!!

I do not know what I have to do , can it will help rev.2 but where from to take

Thanks for this solution zephyroth

I will try it tonight [I am a working man only find time at nights :( ] and keep you posted with the experience :)

did you try the other solutions mentioned in the wiki? for me setting the resolution very low worked..

zephyroth,

Just for confirmation
I have to apply ur suggest solution in the terminal utility after booting from the DVD
or on the boot menu of dvd with flag as -s !!!

And also to mention that i have nvidia geforce go 1650 graphics card .... if I remove all the kext related to geforce & nvidia won't it break something other ????

prateesh, don't worry, It's not going to break anything.

To get rid of that firewire error whilst booting (in your case in single user mode), disable 1394 (FireWire) in BIOS.
It's not a problem to re-enable it later, as it will work.

Just disable it for now, and when your System will be set up,
then enable it again and you'll be able to use FireWire flawlessly.

Boot with -s again, or if it doesn't work, boot the dvd and use the built in Terminal.

Make sure that you type these commands as given:

After you successfully booted up your system (and only if you are on Rev.1),
install zephyroths NVIDIA drivers, which can be found at the wiki http://osx86.wikidot.com

I remove all GeForce and NV kext's and remove -v -legacy. Works fine for me without trouble. Big thanks for all people who work on this project and for helping us to run it on AMD machines.
My comp. runs on both cores.
Problem is with booting(can't boot at all and for booting i\m usinf tiger-install tiger and over it iinstall leopard and problem solved).
Thanks again and god bless u all.

:) Nice!

The bootloader is also easy to fix though!

Puttabong thanks for posting fast.Will u tell me how to fix booting without installing tiger first. I try'd with fdisk -e /dev/rdisk0s1 and all similar apraches but still nothing.
One question. When will be rev.2 and will it be ppf file or whole DVD. I ret'd to putt darvin boot loader in this AMD leo but still did not test it ( i putt it like in iatkos 1.0i in disk utility folder).
Thanks in advance your truly friend Lugmor.

lol...Really?. Maybe I need a bootloader on my head (kidding)!. lol :D

Did you install with MBR or GUID?

MBR

Hi,
i have a MSI Megabook S271,
i don't help testing the new version!

I downloaded MAC 10.5 for PC AMD

My PC
Athlon64 X2 4800+
nvidia Geforce 6150se/nforce430
seagates sata 320gb
samsung 667 ddr2 1gb*2
when i install MAC, erase HD,it error

http://img217.imageshack.us/img217/2752/img0043ti6.jpg
sorry, my (Edited By; Wyatt) English* is very bad

Edited by Roisoft: No links to torrent files, please.
edited by ROisoft 2º: [b]NO LINKS TO TORRENTS OK? LAST WARNING!!!! [/b]

Hello
Puttabong and Zephyroth

I have the same problem what (binhu)
please give me link for beta tester
sorry for English
thanks

Hi,
Puttabong and Zephyroth

thanks for works

rev.2 support to guid bootloader? (performance review)
and

do you have recommend motherboard (i've 690g mb)

Processor
Manufacturer AMD Athlon(tm) 64 X2 Dual Core Processor 5000+
Clock Speed 2.6GHz
L2 Cache Size 1024

Processor
Clock Speed 2.6GHz

Memory
3 gigs

Network Card
Adapters NVIDIA nForce Networking Controller

Storage
Drive Type Drive Size Total Available Space Used Space
C: NTFS 298.0Gb 273.7Gb 24.27Gb
J: NTFS 186.3Gb 66.23Gb 120.0Gb

Storage

Hardware
Type Description
DVD/CD-ROM Drives HL-DT-ST DVD+-RW GSA-H73N SCSI CdRom Device
HL-DT-ST DVD-ROM GDRH10N SCSI CdRom Device
Disk Drives SAMSUNG HD321KJ SCSI Disk Device 298.0Gb
AFT PRO -8MX CF USB Device
AFT PRO -8MX MS USB Device
AFT PRO -8MX SD USB Device
AFT PRO -8MX SM/XD USB Device
Maxtor OneTouch III USB Device 186.3Gb
Display Adapters NVIDIA GeForce 8400 GS 256Mb
IDE ATA/ATAPI Controllers Standard Dual Channel PCI IDE Controller
IDE Channel
IDE Channel
NVIDIA nForce Serial ATA Controller
NVIDIA nForce Serial ATA Controller
Keyboards HID Keyboard Device
Microsoft eHome Remote Control Keyboard keys
Microsoft eHome MCIR Keyboard
Microsoft eHome MCIR 109 Keyboard
Mice and Other Pointing Devices HID-compliant mouse
HID-compliant mouse
HID-compliant mouse
Monitors Dell SE198WFP(Digital) - Dell Inc.
Sound Devices USB Audio Device
High Definition Audio Device
USB Controllers Standard OpenHCD USB Host Controller
Standard Enhanced PCI to USB Host Controller


these are my spec could i be a beta tester thanks
bhast2

I guess we should stop asking to be beta testers. I've asked 2x and didn't even get the courtesy of a reply. I'm just going to wait patiently.

I agree, and just to let you know 10.5.2 has released.

Any idea when when rev 2 is coming? I'm kind of lucky guy running Leo on one of my machine(Asrock 775Dual-915GL 10.5.1 Kalyway GUID) with no problems, but I have Compaq laptop and my second machine both based on nvidia mcp51 and rev.2 is my big chance. I see from discussion that this nvidia chipset should be supported at least in case of SATA, not sure about keyboard or mouse. Thanks for all the work Zephyroth.

10.5.2 has been released? The moment has come? HALELOOYAH! (lol) Can you give me the download link??

if it has been released? Where can we get it at?

10.5.2 Apple update has not been released yet ... So my ISO has not been released too.
And for those who complain that I've not reply to their request of being beta testers ... If you knew how many people asked me ...

Just want to share my experience of 10.5.1 release

"Resolution was very low ... tried Zephyroth NVidia Universal Installer .... But no luck
"my Video card is this on 6150 http://www.nvidia.com/object/mobogpu_nb_6series.html"
"Lan did'nt worked neither my broadcomm wireless"
"DVD writer deteted properly & working perfactly"
"NO QE/CL for me :("
"Sata Hdd is readonly"
"No Sound from my Conexant Cx20549 @ nVIDIA nForce 430 (MCP51) - High Definition Audio Controller PCI"


But there are other problem also like
HDD won't boot without DVD in drive
Sometime error comes because of which "Still waiting for root device" comes ( I mean if i try to boot 5 times then 1 time is success rate)

Any suggestions/Solution for my problem

For sound, get AppleAzalia ALC88x kext, it will work for you since we got the same one.
LAN, buy one of those 10$ Realtek cards or find them somewhere if you kept all of your used ones at home.

I have no help on your 6150, it seems that we can't have QE/CI on onboard GPUs that use system memory.

May be I shouldn't trust those Mac Rumors sites. According to an actual version tracker site, MacOSX 10.5.2 is in its last step before being finalized. It shouldn't be long. Zephyroth's DVD can be here today or tomorrow. According to the talk I had with Apple, Rep told me 10.5.2 is in its last stage, RC2 (in Windows Language, lol). Once the final is released, Zephyroth will integrate that update and upload the final copy of rev. 2 on all of our favorite P2P sites. I can't wait. This is going to be great. Let's all consider donating Zephyroth for his efforts! Zephyroth, do you accept Paypal,? :-)

I think we must stop to ask for be beta testers, 10.5.2 will come out in few days and so Zephiroth rel.2 I think.
I think also that Zephiroth is able to contact everyone on this site or on Insanely Mac (by PM, mail, everything) if he needs someone for test. If he don't needs more testers maybe there's a reason.
For me I contributed in testing video drivers on 8800GT, but no beta testing and I am waitng patiently for the release using Zephiroth Rel.1 as my primary system.
So: Good work Zephiroth, take your time, keep us informed on progresses!

I am so excited and can't hardly wait for the 10.5.2 release to be released. Does anyone know if you have to have tiger installed than update to leopard for it to boot properly. Also does anyone know whether my LAN which is: Realtek RTL8201N will be supported in 10.5.2? Also my video card which is: NVIDIA GeForce 6150SE nForce 430, and my sound card, Realtek High Definition Audio driver version 6.0.1.5502 will they have compatibility in 10.5.2?

Oh because I am a noob, if I didn't specify any hardware specifications, you can find all about my computer at this page:
http://h10025.www1.hp.com/ewfrf/wc/product?lc=en&cc=us&dlc=en&product=3440614&os=2093 &lang=en&

Thank You everyone, and thank you Zephyroth for your constant work on the release of 10.5.2.

Hmmm, I don't think there were ever onboard 6150s on real Macs but if somehow can someone can edit the Intel Graphics Media Accelerator 950 or X3100 kexts since they are onboard graphics that use system memory I think.

I hope that the new nForce ATA uploaded by MeDevil are included in 10.5.2 Rev 1.

Hey zephyroth
I know you probz dont need any now but i will be happy to beta test your Amazing Project
My systems specs are:
Abit NF-M2S Motherboard
AMD X2 3800+
Built in sound (Realtek) and external USB Sound card(C-Media)
4GB of ram
Nvidia 7900GT
160GB Sata Seagate HD
400GB IDE Seagate HD
Anyways well done on this amazing project! If you accept Donations send me the link
Or if you accept paypal :-)
Cheers, C.Logan

Hi all,

I realize that zephyroth is still working on the Rev. 2 and will release it when he is ready, however, I was wondering if us Rev. 1 guys could get the updated Nforce LAN drivers (force-deth) in order to use 2 CPU cores without Leopard freezing.

Thanks,

Chagani

Still problem with booting if install leopard without tiger before but my system using 2 cores AMD X2 6000.

I second that request ... or was it already posted somewhere?

Was that an answer to my question which is:
Sorry that sounds kind of mean/rude but I really want to find out...

Yeah. It was an answer to that.
I have the same problem... No QE/CI..
Best bet is to get those cheap nVidia 7xxx GPUs since they are compatible.

Just wondering if 8600 GTS is supported in the nVidia installer because I will be replacing my onboard with this very soon.

Mine is working just fine... So is our 8600GT.

Hey Zephyroth is there any chance that u can make ppf file that can set com.apple.boot.plist form -v -legacy to -x (safe mod) that people can boot and delete GeForce and NV kext's and to set boot if they canot boot without DVD.
That is my problem and many others. Only solution is that one, as i can see from my point of view. I know that rev. 2 is coming soon but that will be very nice if u want to do that. I will try to see what can I do but one way or another everything is up to you.
Thanks in advance and we all waiting for your rev.2.

Hi Zephyroth! I'm from russia and on our national bit-torrent sevrer there are a lot of people who waits your Rev. 2... If I only could place Rev. 2 on our torrent server, there woul be much more comments, how your new build works... Besides, I, myself, have AMD s939 4200+ processor and can hardly wait to install the newest build of MacOS X Leopard on my computer! Can you give me an ability to download Rev. 2 ?

xlamer.. rev2 :) is still in beta :) so.. its not released to the public

Here's my problem with Leo AMD Rev.1, I don't think it's mentioned before, so here it is :

I installed Leo on my AMD 64x2 AM2 4200+. Nothing went smooth, I got ALL kinds of errors, 1 minute Hang, NVidia and GeForce kernel panic, can't boot without DVD, you name it. Using suggestions found here and on insanelymac I got through all those problems (still can't boot without DVD though, tried evereything). So I get to the Setup Assistant where my USB keyboard is identified, languge options and finally "User Account Creation". I just enter login info and then everything freezes with beach ball spinning and a message saying "Creating User Account". Using MacDrive I can see all accounts I tried to enter were indeed created. So I try anything I can find, disabled onboard LAN, even booted with "Graphics Mode"="640x480x32" and it seemed to work 'cause I got a message saying that "The setup assistant can't start in this resolution" (or something like that), but when I press OK so everything can continue, guess what...grey screen with th beach ball. And that's it, nothing beyond that. Any help would be apreciated, however I don't expect much.

P.S. I'm using MSI K9n - Nforce - 550

Other than that Zeph you're the man, keep up the good work, and hurry up on that Rev.2 thing...can't wait!!!

Iam using a Turion 64 X2 but i cant help you with that.
the only thing is that there will be NO final Rev.2!

It will be 10.5.2 Rev.1 ;) (not 10.5.1 Rev2) ;)

Nvidia Kext (9c30)

http://scottdangel.com/files/NVInstallerV.32.pkg

is this .pkg supposed to help MY problem? and if it is then how can I use it? I don't know how to install .pkgs

Just double-click on the package to install ;-)

Hi,

I am very interested in beta testing the Zephyroth Leopard 10.5.1 AMD rev2, can anyone tell how/where I can obtain a copy, I also want to say that I truely appreciate the effort and time that goes into the creation and distribution of this software.

When can we expect the rev2 release?


My System:
MB: Asus M2N32-SLI Delux with nForce 590 chip set
Memory: 4gig DDR3
Video Card: NVIDIA gForce 7300GS
Hard drives: WD 250SATA, WD 320 SATA
Maxtor 160 IDE
CPU: AMD Athlon 64x2 dual core 4200+

Cheers

DDR3? I doubt it... (I have the same mobo)

Oops! typo on the memory, I meant to say 4gig of DDR2 memory, in any case is there a copy of the Rev.2 beta available yet?

btw, I am using Rev.1 and it' s running just fine after some playing around.

me too, i want

.

no one (official beta tester only) will get/have a copy of 10.5.1 Rev2. The Final will be 10.5.2 Rev.1 which will be a public release. so please stop asking....the release will be soon (until 10.5.2 is released by apple)

Gosh, I have almost the same config but can't use the rev1 =\
Were you able to install rev1 into anyone of your SATA hard drives? I think you installed it into your ATA, isn't it? If not so, how did you do it?

Thanks!