InfiniteMac OSx86
Page 58 of 77 « First < 8485657 58 596068 > Last »
Show 50 post(s) from this thread on one page

InfiniteMac OSx86 (http://infinitemac.com/forum.php)
-   Snow Leopard 10.6 (http://infinitemac.com/forumdisplay.php?f=87)
-   -   [GUIDE] Retail Snow Leopard DVD install for G31M-ES2L (http://infinitemac.com/showthread.php?t=3672)

beeros05 03-30-2010 11:41 AM
Quote:
Originally Posted by brainzito (Post 46296)
Hi, As you may see, I'm new to the hackintosh scene.

I updated to 10.6.2 after moving sleepenabler.kext from /extra to the desktop.

I can boot but i get no video, just a black screen with a functioning mouse arrow. When I hit the power button, the display shows a normal screen?!?!?!

What do I do now????

FYI, I was 100% working prior to the update ( Video, Sound, Net, Sleep, etc...)

Thanks!!!!!!!!
Guys hi there! i had the same problem as well!

My Specs are:

CPU: Pentium D E6300 @ 2.8
MOBO: G31M-ES2L rev 1.0
VGA: Gigabyte 8400 GS 512
RAM: Kingston Hyper X 2GB@800

The thing is that i do not want to do again a fresh install, there is no reason to go through this procedure again, after all we are running ''macs'', fresh installs and formats are for Windows shit (imho)!

So i have followed the same guide as well and i am running 10.6
Does anybody have THE solution for the video matter?
Besides sleep enable kexts are there any other kexts that we should remove/install like graphics kexts?

simsim 03-30-2010 01:06 PM
I had to reverse to 10.6.2

Got a blue screen with 10.6.3
Removed sleepenabler before updating.
Maybe it's something to do with my graphics card (7300).
I'll just have to wait awhile before updating, see what develops.


G31m-ES2L
E6300@ 2.8
7300 GT
64 bit


edit: its a 64 bit problem, it works when using "arch=i386" as boot argument.
Fixed sound by installing AppleHDA.kext from 10.6.2 by dropping on Kext Utility.

n1c3jack3t 03-31-2010 12:05 AM
Quote:
Originally Posted by beeros05 (Post 46786)
Guys hi there! i had the same problem as well!

My Specs are:

CPU: Pentium D E6300 @ 2.8
MOBO: G31M-ES2L rev 1.0
VGA: Gigabyte 8400 GS 512
RAM: Kingston Hyper X 2GB@800

The thing is that i do not want to do again a fresh install, there is no reason to go through this procedure again, after all we are running ''macs'', fresh installs and formats are for Windows shit (imho)!

So i have followed the same guide as well and i am running 10.6
Does anybody have THE solution for the video matter?
Besides sleep enable kexts are there any other kexts that we should remove/install like graphics kexts?
Try using the NVEnabler kext. Flawless upgrade to 10.6.3. DVI to HDMI fully working.

BlaSTiWi 03-31-2010 03:56 AM
What audio kext are you using? I seems to lost only audio while the rest seems to be good ... no more output listed in audio pref. ...

Quote:
Originally Posted by n1c3jack3t (Post 46834)
Try using the NVEnabler kext. Flawless upgrade to 10.6.3. DVI to HDMI fully working.

arsonwells 03-31-2010 04:33 AM
Quote:
Originally Posted by BlaSTiWi (Post 46842)
What audio kext are you using? I seems to lost only audio while the rest seems to be good ... no more output listed in audio pref. ...
I'm having the same problem, even after installing tonymac's kext. Not sure what else to try :-/

simsim 03-31-2010 07:03 PM
7300 gt
 
Reading the comments on netkas.org concerning 10.6.3 update I came upon the following by "mac_dude".

"As I see there is no more 64 bit Support for GForce 7xxx Cards in 10.6.3 "

Might explain my problems when updating.

rwillett 03-31-2010 11:11 PM
Fix for black screen
 
I have a very similar spec to you, though the graphics card is an Asus 9400GT.

If you can set the energy saver to one minute, or leave the |Enegry saver for the screen to come on then move the mouse it springs into action and works OK. I set mine to one minute when I'm booting and then move it to 15 min afterwards.

I've never got it to work directly after a boot. I *think* you can also get to it from a Screen sharing session and set it through that.

Rob

Quote:
Originally Posted by beeros05 (Post 46786)
Guys hi there! i had the same problem as well!

My Specs are:

CPU: Pentium D E6300 @ 2.8
MOBO: G31M-ES2L rev 1.0
VGA: Gigabyte 8400 GS 512
RAM: Kingston Hyper X 2GB@800

The thing is that i do not want to do again a fresh install, there is no reason to go through this procedure again, after all we are running ''macs'', fresh installs and formats are for Windows shit (imho)!

So i have followed the same guide as well and i am running 10.6
Does anybody have THE solution for the video matter?
Besides sleep enable kexts are there any other kexts that we should remove/install like graphics kexts?

dustintinsley 04-01-2010 03:06 AM
Quote:
Originally Posted by arsonwells (Post 46844)
I'm having the same problem, even after installing tonymac's kext. Not sure what else to try :-/
Same here. No audio for me either...

Horne Fisher 04-01-2010 11:52 AM
10.6.3 fully working here after following n1c3jack3t's instructions to install the newer SleepEnabler before applying the 10.6.3 update and then the tonymacx86 audio fix after restarting.

Kexts installed in Extra/Extensions:
  • fakesmc.kext
  • LegacyALC883.kext
  • NullCPUPowerManagement.kext
  • OpenHaltRestart.kext
  • PlatformUUID.kext
  • SleepEnabler.kext
GA-G31M-ES2L
E6300 2.8GHz (OC 3.33GHz)
Asus 9400GT 512MB
32bit

zim2dive 04-01-2010 09:04 PM
Has anyone tried sleep without the new sleepenabler? I saw several reports (not our mobo) that some folks don't need sleepenabler any more (edit: with 10.6.3)