InfiniteMac OSx86 - Lion with AMD

InfiniteMac OSx86 (http://infinitemac.com/forum.php)

- Lion 10.7 (http://infinitemac.com/forumdisplay.php?f=100)

- - Lion with AMD (http://infinitemac.com/showthread.php?t=7106)

Quote:

Originally Posted by PookyMacMan (Post 56746)

Will do!!! Thank you so much!!! :D

Just talked to meklort on IRC; to allow 64-bit support for SSE3-only CPUs, there need to be changes in the commpage to use SSE3 commands instead of SSSE3. I'll be working on that. ;)

You programmer for assembler ?? )

Quote:

Originally Posted by Unrealized (Post 56750)

Thank you for the source code! Let the exploration begin :D

Sysctl says 16. :S all I get is a instant reboot. Same on Linux, cat /proc/cpuinfo says 16.

Ok ! You try fix it )

My system stucks like the System of gedna.
One line before DSMOS will be displayed.

Quote:

Originally Posted by wastez (Post 56757)

My system stucks like the System of gedna.
One line before DSMOS will be displayed.

You try download boot from clover and run LION )
Should work ! )

Quote:

Originally Posted by bronzovka (Post 56756)

Ok ! You try fix it )

I'd love if someone added it for me as I have a barely working OS X system at the moment. (You know, Snow Leopard and GTX 550 Ti don't like each other so I'm stuck at 1024x768)

I'll be waiting for a updated kernel. :)

Quote:

Originally Posted by bronzovka (Post 56755)

You programmer for assembler ?? )

Actually, this is new for me. :) I'm gonna try and see what I can do, though.

Quote:

Originally Posted by gedna (Post 56717)

Thank for replay, the problems still exist, i have snow leopard. o other partition (GUID partition table) i installed iatkos l2 wich is 10.7.2, with iatkos i have installed these kexts (Fakesmc,Disabler,RTC,EVOreboot and IOPCIfamily kext) then i put my ATIATA kext in S/L/E then i put your kernel on root, installed Chameleon-2.1svn-r1914, (i dont know how to install other bootloader this one has installer) and then i tried to boot, my flags are: -legacy userkernelcashe=no -v, system hangs on waiting for DSMOS, then i delete (like you sed) intelapplecpumanagement.kext tried to boot, still the same, tried boot flag usbbusfix=yes.. and still the same system hang on waiting for DSMOS.... i have no idea what i have done wrong? its clearly has to work on my stystem, any thoughts?

http://s13.postimage.org/ythlga66r/DSCN3434.jpg

I also have the exact same problem.. Using the Model 5 Kext with a vanilla Lion 10.7.0 Install (with FakeSMC and NullCpuPowerManagement)

Any help would be very appreciated

@bronzovka the man the legend the most interesting man in the world

Thank you so much for your work, Bronzovka! I knew there was a way for AMD users. Good thing I held on my system.

Could someone tell me if my 10.7.0 install media works if I upgrade through Snow Leopard? And why it removes all files when I pick restart in Lion installer? I'm a bit confused here. Any help is appreciated :) or do I need to download 10.7.3 iso somewhere? (I burned my 10.7.0 App Store download to disc last year.)

(Also, can I install Lion to a partition by double clicking OSInstall.mpkg?)

I don't have a intel machine so I need a way to install it. :) I guess Xmove with 10.7.3 iso would work? Unless the kernel doesnt work with a 10.7.3 based installer either.. :(

Can someone who installed it without a intel machine tell me how they did it?

Quote:

Originally Posted by wastez (Post 56757)

My system stucks like the System of gedna.
One line before DSMOS will be displayed.

this worked for me

add flag

-s

then type in

mount -uw /

exit

should say
removed 2## orphand / unlinked files and 9 directories
(just an example)

then it boots. for me boots on third try and says the above line .its weird

Quote:

Originally Posted by delgadilloalex (Post 56767)

nop not worked for me, when i type mount -uw / and exit, i get no lines at all, using latest fakesmc... just cant get pass DSMOS

HP Pavilion Product Name dv7-4179nr

If you don't try it, we can't know if it run in your cpu.

Mac OS X Lion For All Computers Including AMD 10.7.3 V2 - Niresh

Usual place...

Quote:

Originally Posted by pαuℓzurrr. (Post 56772)

Mac OS X Lion For All Computers Including AMD 10.7.3 V2 - Niresh

Usual place...

Is this the same kernel or is other modified?

It has the same kernel! I haven't had the time yet to test it. Will report back when i've tested the DVD.

Quote:

Originally Posted by pαuℓzurrr. (Post 56774)

It has the same kernel! I haven't had the time yet to test it. Will report back when i've tested the DVD.

But if it is the same kernel, finder won't run...

I'm not even sure if it would boot the dvd..

i think this version use the kernel already we have
and nearly the dvd maker hadnt tested it on amd

any way try

Quote:

Originally Posted by pαuℓzurrr. (Post 56776)

I'm not even sure if it would boot the dvd..

Do you have Amd Turion 64 X2 on your Dell?

The first thing I'm going to do is apply the diff to all the Lion xnu sources and see if that will boot the installer. :)

Anyone knows a way to install this without a Intel machine?

ok i give up at the moment :) tried everything i can possibly can, from boot flags to different kexts, and fakesmc, CANT pass the waiting for DSMOS.. hang, i think it could be related to bootloader, but i cannot imagine that chameleon cant boot lion, nonsense, tried Clover_v2_r338_EFI_x32_x64.pkg it gives me black screen, or i dont know how to install it properly.

In answer to Unrealized...

Quote:

Originally Posted by PookyMacMan (Post 56779)

The first thing I'm going to do is apply the diff to all the Lion xnu sources and see if that will boot the installer. :)

That should work...

Quote:

Originally Posted by PookyMacMan (Post 56782)

That should work...

It should, let us know how it goes.

Quote:

Originally Posted by gedna (Post 56781)

How are you trying to install Clover?

Quote:

Originally Posted by Unrealized (Post 56780)

Anyone knows a way to install this without a Intel machine?

With Snow Leopard on AMD or Mac Machine.

Quote:

Originally Posted by lunfai (Post 56783)

It should, let us know how it goes.

How are you trying to install Clover?

With Snow Leopard on AMD or Mac Machine.

with installer, no matter what option i choose, 64-32 or any of updates, i got black screen,

Quote:

Originally Posted by gedna (Post 56785)

with installer, no matter what option i choose, 64-32 or any of updates, i got black screen,

http://www.osx86.net/view/2571-clove...er_+_boot.html try this one. Newer build on here + more information rev351.

Quote:

Originally Posted by lunfai (Post 56786)

http://www.osx86.net/view/2571-clove...er_+_boot.html try this one. Newer build on here + more information rev351.

thank you for replay, tried this one too, no go, btw what to choose? boot0 64 or 32? boothfs -32or 64? or updates? on amd system

Quote:

Originally Posted by gedna (Post 56787)

thank you for replay, tried this one too, no go, btw what to choose? boot0 64 or 32? boothfs -32or 64? or updates? on amd system

I think if you've got a GUID partition use boothfs -32, or if you have MBR patched drive install use boot0 32.

Quote:

Originally Posted by lunfai (Post 56783)

With Snow Leopard on AMD or Mac Machine.

How?Since one cannot boot with the installer. Any steps?

Do I use my 10.7.0 install media or do I download it elsewhere?

Quote:

Originally Posted by Unrealized (Post 56789)

How?Since one cannot boot with the installer. Any steps?

Do I use my 10.7.0 install media or do I download it elsewhere?

I've heard that you can install on another partition from using the Lion Install WITHIN Snow Leopard, so you don't need to boot the Installer. Also look at this: http://tonymacx86.blogspot.co.uk/201...-107-lion.html

Quote:

Originally Posted by lunfai (Post 56790)

Yeah, I know XMove, but it fails.

I would love to know how do I install Lion within Snow Leopard, as the OSInstall.mpkg method doesn't work. It says there is no software found to be installed.

I'll try using CCC to clone the Snow Leopard installation to a GUID partitioned drive. Maybe XMove works then.

(Also, 1024x768 is starting to hurt my eyes, 3 weeks with no QE/CI is fun :P)

:/

Quote:

Originally Posted by Unrealized (Post 56791)

for gfx did you tried nvidia driver for 10.6.8

Quote:

Originally Posted by lunfai (Post 56788)

I think if you've got a GUID partition use boothfs -32, or if you have MBR patched drive install use boot0 32.

Yes my all hdd is on GUID with 2 partition one for snow other for Lion, and your suggested choices didnt worked, black screen, no go

Quote:

Originally Posted by gedna (Post 56793)

Yes my all hdd is on GUID with 2 partition one for snow other for Lion, and your suggested choices didnt worked, black screen, no go

have you tried npci=0x3000 with char?

Quote:

Originally Posted by $The-King$ (Post 56792)

for gfx did you tried nvidia driver for 10.6.8

Yup, but GTX 550 Ti is only supported from 10.7 :)

Quote:

Originally Posted by Unrealized (Post 56795)

Yup, but GTX 550 Ti is only supported from 10.7 :)

try 10.7.3 kexts on 10.6.8 !!

Quote:

Originally Posted by Unrealized (Post 56795)

Yup, but GTX 550 Ti is only supported from 10.7 :)

Have you treid forcing your resolution?

Graphics Mode=1280x1024x32

Replace the bolded with your native resolution. It won't fix QE/CI but will have native resolution.

Quote:

Originally Posted by lunfai (Post 56797)

Have you treid forcing your resolution?

Graphics Mode=1280x1024x32

Replace the bolded with your native resolution. It won't fix QE/CI but will have native resolution.

Yeah, I did, it reverts to 1024x768 :)

Anyways, back on topic, xmove worked on my GUID formatted partition, but the installer doesn't really want to start. all I have is a console, where I can write stuff but it doesn't load anything. And with -legacy I get a kernel panic.

Will try with 10.7.3 iso if it has some more use. :eek:

Quote:

Originally Posted by Unrealized (Post 56798)

There's a "AMD 10.7.3" iso floating around.

I'm getting a kernel panic. First try run with boot flags "-v -legacy"
Using kernel 'v3' for AMD 64 X2 5000+

I also managed to get the kernel.log

Code:

Apr  4 19:26:32 localhost kernel[0]: no linesizeLONG MODE supportednpvhash=4095

Apr  4 19:26:32 localhost kernel[0]: PAE enabled

Apr  4 19:26:32 localhost kernel[0]: rtclock_init: Taking bus ratio path 1 (AMD Athlon)

Apr  4 19:26:32 localhost kernel[0]: TSC: Verification of clock speed PASSED.

Apr  4 19:26:32 localhost kernel[0]: TSC: Frequency =   2611.832054MHz, FSB frequency =  200.910158MHz, bus ratio = 13

Apr  4 19:26:32 localhost kernel[0]: Darwin Kernel Version 11.3.0: Mon Apr  2 00:57:02 MSD 2012; root:xnu-1699.24.23_2/BUILD/obj//RELEASE_I386

Apr  4 19:26:32 localhost kernel[0]: vm_page_bootstrap: 1009867 free pages and 30517 wired pages

Apr  4 19:26:32 localhost kernel[0]: zone leak detection enabled

Apr  4 19:26:32 localhost kernel[0]: standard timeslicing quantum is 10000 us

Apr  4 19:26:32 localhost kernel[0]: mig_table_max_displ = 73

Apr  4 19:26:32 localhost kernel[0]: warning: skipping personalities in blacklisted kext com.apple.driver.AppleIntelCPUPowerManagement

Apr  4 19:26:32 localhost kernel[0]: NullCPUPowerManagement::init: properties=0x9a92300

Apr  4 19:26:32 localhost kernel[0]: NullCPUPowerManagement::start

Apr  4 19:26:32 localhost kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled

Apr  4 19:26:32 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled

Apr  4 19:26:32 localhost kernel[0]: calling mpo_policy_init for Sandbox

Apr  4 19:26:32 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)

Apr  4 19:26:32 localhost kernel[0]: calling mpo_policy_init for Quarantine

Apr  4 19:26:32 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)

Apr  4 19:26:32 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet

Apr  4 19:26:32 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)

Apr  4 19:26:32 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993

Apr  4 19:26:32 localhost kernel[0]: The Regents of the University of California. All rights reserved.

Apr  4 19:26:32 localhost kernel[0]: MAC Framework successfully initialized

Apr  4 19:26:32 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers

Apr  4 19:26:32 localhost kernel[0]: Unsynchronized  TSC for cpu 1: 0x0000002ecccfecc8, delta 0x23c682

Apr  4 19:26:32 localhost kernel[0]: IOAPIC: Version 0x11 Vectors 64:87

Apr  4 19:26:32 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)

Apr  4 19:26:32 localhost kernel[0]: VoodooTSCSyncAMD: Starting...

Apr  4 19:26:32 localhost kernel[0]: VoodooTSCSyncAMD: Syncing TSC every 10 seconds.

Apr  4 19:26:32 localhost kernel[0]: netkas presents fakesmc, a kext which emulates smc device

Apr  4 19:26:32 localhost kernel[0]: Kext com.apple.driver.AppleHDAController - library kext com.apple.iokit.IOGraphicsFamily not found.

Apr  4 19:26:32 localhost kernel[0]: Can't load kext com.apple.driver.AppleHDAController - failed to resolve library dependencies.

Apr  4 19:26:32 localhost kernel[0]: Kext com.apple.driver.AppleHDAController failed to load (0xdc00800e).

Apr  4 19:26:32 localhost kernel[0]: Failed to load kext com.apple.driver.AppleHDAController (error 0xdc00800e).

Apr  4 19:26:32 localhost kernel[0]: Couldn't alloc class "AppleHDAController"

Apr  4 19:26:32 localhost kernel[0]: USBF:        16.221        AppleUSBEHCI[0x94ad000]::CheckSleepCapability - controller will be unloaded across sleep

Apr  4 19:26:32 localhost kernel[0]: Kext com.apple.GeForce - library kext com.apple.NVDAResman not found.

Apr  4 19:26:32 localhost kernel[0]: Can't load kext com.apple.GeForce - failed to resolve library dependencies.

Apr  4 19:26:32 localhost kernel[0]: Kext com.apple.GeForce failed to load (0xdc00800e).

Apr  4 19:26:32 localhost kernel[0]: Failed to load kext com.apple.GeForce (error 0xdc00800e).

Apr  4 19:26:32 localhost kernel[0]: Couldn't alloc class "NVKernel"

Apr  4 19:26:32 localhost kernel[0]: AppleNForceATA: found 0 units.

Apr  4 19:26:32 localhost kernel[0]: AppleNForceATA: sata phy reset done.

Apr  4 19:26:32 localhost kernel[0]: AppleNForceATA: found 1 units.

Apr  4 19:26:32 localhost kernel[0]: AppleNForceATA: NVIDIA nForce MCP 61 Serial ATA by MeDevil (CMD 0x9f0, CTR 0xbf0, IRQ 20, BM 0xd800)

Apr  4 19:26:32 localhost kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]

Apr  4 19:26:32 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused

Apr  4 19:26:32 localhost kernel[0]: AppleNForceATA: sata phy reset done.

Apr  4 19:26:35: --- last message repeated 1 time ---

Apr  4 19:26:32 localhost kernel[0]: AppleNForceATA: found 0 units.

Apr  4 19:26:32 localhost kernel[0]: AppleNForceATA: found 1 units.

Apr  4 19:26:35: --- last message repeated 1 time ---

Apr  4 19:26:32 localhost kernel[0]: AppleNForceATA: NVIDIA nForce MCP 61 Serial ATA by MeDevil (CMD 0x9e0, CTR 0xbe0, IRQ 21, BM 0xc400)

Apr  4 19:26:32 localhost kernel[0]: AppleNForceATA: NVIDIA nForce MCP 61 Serial ATA by MeDevil (CMD 0x960, CTR 0xb60, IRQ 21, BM 0xc408)

Apr  4 19:26:32 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start

Apr  4 19:26:32 localhost kernel[0]: AppleNForceATA: warning: phy connection failed. status=0x00000000

Apr  4 19:26:32 localhost kernel[0]: AppleNForceATA: found 0 units.

Apr  4 19:26:32 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start

Apr  4 19:26:32 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded

Apr  4 19:26:32 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded

Apr  4 19:26:32 localhost kernel[0]: AppleNForceATA: warning: phy connection failed. status=0x00000000

Apr  4 19:26:32 localhost kernel[0]: AppleNForceATA: found 0 units.

Apr  4 19:26:32 localhost kernel[0]: Kext com.apple.driver.AudioAUUC - library kext com.apple.iokit.IOGraphicsFamily not found.

Apr  4 19:26:32 localhost kernel[0]: Can't load kext com.apple.driver.AudioAUUC - failed to resolve library dependencies.

Apr  4 19:26:32 localhost kernel[0]: Kext com.apple.driver.AudioAUUC failed to load (0xdc00800e).

Apr  4 19:26:32 localhost kernel[0]: Failed to load kext com.apple.driver.AudioAUUC (error 0xdc00800e).

Apr  4 19:26:32 localhost kernel[0]: Couldn't alloc class "AudioAUUCDriver"

Apr  4 19:26:32 localhost kernel[0]: 0        0 AppleUSBCDC: start - initDevice failed

Apr  4 19:26:32 localhost kernel[0]: IOATAController device blocking bus.

Apr  4 19:26:32 localhost kernel[0]: 0        0 AppleUSBCDC: start - initDevice failed

Apr  4 19:26:32 localhost kernel[0]: USBMSC Identifier (non-unique): 00000500B9F4 0x644 0x200 0x400

Apr  4 19:26:32 localhost kernel[0]: 0        0 AppleUSBCDC: start - initDevice failed

Apr  4 19:26:32 localhost kernel[0]: USBMSC Identifier (non-unique): 922347316021 0x152d 0x2337 0x100

Apr  4 19:26:32 localhost kernel[0]: rooting via boot-uuid from /chosen: D3905690-76A5-3D0E-8E59-47556B16BF7F

Apr  4 19:26:32 localhost kernel[0]: From path: "uuid", Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>

Apr  4 19:26:32 localhost kernel[0]: 0        0 AppleUSBCDC: start - initDevice failed

Apr  4 19:26:32 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/USB2@2,1/AppleUSBEHCI/USB to ATA/ATAPI Bridge@22800000/MSC Bulk-Only Transfer@0/IOUSBMassStorageClass/IOSCSIPeripheralDeviceNub/IOSCSIPeripheralDeviceType00/IOBlockStorageServices/IOBlockStorageDriver/MAXTOR S TM3160215A Media/IOGUIDPartitionScheme/Lion@4

Apr  4 19:26:32 localhost kernel[0]: BSD root: disk2s4, major 14, minor 10

http://img641.imageshack.us/img641/4479/fotonva.jpg

This is what my Extra folder looks like

http://img18.imageshack.us/img18/161...ng2012040h.png

Boot in single-user mode (-s) and type

rm -R /System/Library/Extensions/AppleTyMCEDriver.kext

A good option with Lion is to NOT use an E/E folder ...

Putting every kext in the S/L/E folder provides better results ...

Quote:

Originally Posted by lunfai (Post 56799)

There's a "AMD 10.7.3" iso floating around.

Hope someone who downloaded it could tell about their experience with it. :) I'm personally downloading the 10.7.3 installer from App Store.

Quote:

Originally Posted by PookyMacMan (Post 56802)

Boot in single-user mode (-s) and type

rm -R /System/Library/Extensions/AppleTyMCEDriver.kext

Thanks that worked!

Lion works expect for Finder, for now.

http://img42.imageshack.us/img42/617...ng2012040v.png

personaly dont understand why people bother downloading a pirated copy with something they allready know its only half working anyways..plain stupid to me .i mean if you get caught for that how many times would u slap yourself for it ...just sayin

Quote:

Originally Posted by pαuℓzurrr. (Post 56806)

Thanks that worked!
Lion works expect for Finder, for now.

What's model and family number is your processor? :)

Quote:

Originally Posted by akimoa (Post 56807)

I think your forgetting there are all sorts of IQ people in the world, not everyone is the same ;)

Quote:

Originally Posted by lunfai (Post 56808)

What's model and family number is your processor? :)

machdep.cpu.family: 15
machdep.cpu.model: 107

Code:

  sysctl -a |grep machdep.cpu

machdep.cpu.max_basic: 1

machdep.cpu.max_ext: 2147483672

machdep.cpu.vendor: AuthenticAMD

machdep.cpu.brand_string: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+

machdep.cpu.family: 15

machdep.cpu.model: 107

machdep.cpu.extmodel: 6

machdep.cpu.extfamily: 0

machdep.cpu.stepping: 1

machdep.cpu.feature_bits: 395049983 8193

machdep.cpu.extfeature_bits: 3956538367 287

machdep.cpu.signature: 397233

machdep.cpu.brand: 0

machdep.cpu.features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT PSE36 CLFSH MMX FXSR SSE SSE2 HTT SSE3 CX16

machdep.cpu.extfeatures: SYSCALL XD EM64T LAHF RDTSCP TSCI

machdep.cpu.logical_per_package: 2

machdep.cpu.cores_per_package: 2

machdep.cpu.microcode_version: 0

machdep.cpu.cache.linesize: 64

machdep.cpu.cache.L2_associativity: 1

machdep.cpu.cache.size: 524288

machdep.cpu.address_bits.physical: 40

machdep.cpu.address_bits.virtual: 48

machdep.cpu.core_count: 2

machdep.cpu.thread_count: 2

Quote:

Originally Posted by akimoa (Post 56807)

Yeah, that's why I try to get retail running.

Stuck on this:
http://imgur.com/OFFDL.jpg

I think it doesn't work for install even when it's 10.7.3 dmg from app store..