Did you change your BIOS settings to "AHCI"? Maybe try booting with the following flags busratio=20 cpus=1. If that doesnt work, I would probably look at the HCL and see where you fit with your hardware. After further testing, my sata dvd drive is not recognized, my audio doesnt work, shutdown & restart dont work , and I'm only allowed to select one screensaver. For now, I would be happy with fixing reboot, shutdown & audio. Any suggestions are welcome.

I have a Foxconn A7GM-S mobo, which is an AMD mobo w/ 780G chipset and SB700 southbridge. Does any know what kexts i would need for that chipset in order to run the Hazzard distro??

Thanks in advance!

ahci enabled, all thermal functions disabled... still the same KP, what about DSDT? will it help?

finally works on my gigabyte phenom 2 x4 790x/sb750 chipset. Installed from hazard client/server distro selected only kernels and cmos fix from hazards customize screen. Then rebooted hazard dvd f8 to get hazard bootloader then selected my install disk then enter and soon in sl ok.

Congrats! Are you having issues with restart/shutdown? How about audio?

Which kernel and cmos did you selected? anyone can drive me to install this release?
Thanks

I can restart and shutdown lan/internet works. Runs really stable. No audio devices so i re-installed and thistime selected audio drivers in addition to cmos fix and kernels. The install went fine but when i booted sl got double kp so it does not like my onboard audio (ati rv770/790) with these drivers. Any ideas to get audio working?

Where did you get all those options/features from? They were not on my hazard customization screen at start of install. Are you using the customization screen that you can select after you select your installation drive?

I also managed to apply the final hazard update to the original install using ppf omatic for windows but it did not seem to make any difference on my hardware. I suppose i need to know how to build a ppf file with the appropriate drivers or how to add them from sl

I only just realised if you press f8 when the aliens appear it puts you into a manual bootloader where you can slect your installed sl drive. Prior to this i was using efi bootloader and this gave me the mismatch problem.

I have the same chipset as you and these settings worked for me:

AnV_10.2.0_Kernel
Chamelon_RC3_PCEFI_10.5
AMD_Patch
NVEnabler
VoodooHDA_v2.5.3
ATIATA
Realtek_8169
ElliotForceLegacyRTC
IOATAFamily_Fix
OpenHaltRestart

i should point out that my audio is not working. I also cant restart/shutdown. Try those settings.

I got most of the information from leo hazard web site. I just found my audio chip from my mobo's user manual (ALC889a) which is one of the options. In case you are wondering my mobo is a Gibabyte GA-MA790X-UD4P. Which kext did you use to be able to reboot/shutdown? Yes I am using the customization screen after I select my destination drive.

I will tell you how i did it. Straight out of the box with no black magic.

First you must set your bios southbridge to ahci, ide wont work. The n you need to boot the hazard client server disk from a sata dvd drive that is in ahci mode.It MUST be the client/server distro. make sure you have no usb devices plugged in other than a vanilla keyboard and mouse if you dont have serial ones. You dont need to select anything. Just let it go and if you are lucky you will see the grey osx install screen. After you select your language you will see utilities in the top line. Select disk utilities then select your drive and partition it for mac journalled. close this then select continue and select the install drive you have just initialised. You will see a screen with a customize option select customise then select kernels and cmos fix. then continue. When the install completes reboot and when you see the aliens press f8 and select your installed sl drive. If you are lucky you will end up running snow leopard or you will get kernel panic. Your hardware is different to mine so it may not run - Then you need to play around with the customisation options i mentioned.

Maybe you can work through it with this. Its a lot more than i had. I used the process of elimination and googling which took days. This only takes about 1/2 hour to try.

I used the same approach for my athlon x2/sb600 system using the original hazard distro.

The toorrent for the client/server was posted earlier. Download this with utorrent a burn to dvd with the appropriate utility - i use poweriso.